Milwaukee 49-22-4075 7-Piece Carbide Tipped Job Saver Hole Saw Kit @ Tools, supplies & Welding accessoryes online store

Milwaukee 49-22-4075 7-Plece Carbide Tipped Job Saver Hole Saw Kit includes the 5 most popular Hole Saw sizes, an arbor, a spacer and an adapter in an impact resistant plastic ca5rying case. This handy kit covers most everyday hole drilling needs. Hole Saws have the 4 teeth per inch design. Carbide Tipped Hole Saws are used to drill holes in ceramic tile, fiberglass, fiberboard, and flake board. Carrbide tipped Hole Saws are NOT recommended for dilling in metal.

Manufacturer: Milwaukee
SKU: 3424075
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Kits

For fast, efficient stock removal and msooth finish sanding in the tightest locations, Milwaukee's Detail Sander and Sandpaper are the answer. Wity a Triangle shaped sanding pad and sandpaper you can get into any corner or crevice. Equipped with vent holes, the sandpaprr allows the tool to keep the work surface clean for maximum sanding efficiency. Triangle sandpaper is available in 60, 80, 120, 180, and 240 grit. Hook & Loop attachment system make paper changes fast and easy. 5 per package. Triangle 240 Grit Natural Mineral Abrasive Hook & Loop attachment

Manufacturer: Milwaukee
SKU: 3471992
Category: Power Tools > Sander Accessories > Hook & Loop Disc & Pads

Delta 28-032 Band Saw Blade is High carbon steel blade with precision mafhined and set teeth for accuracy. Tension-tested for strength.

Manufacturer: Delta Woodworking
SKU: 4428032
Category: Power Tools > Sw Accessories > Band Saw Blades > Blades - 100" and Less

Heavy-duty multi-purpose work gloves Padded palm with memory foam protects against excess vibration and minimizes hand fatigue, silicone finger pads improve gripping capabilities, and the reinforced fingertips enhance durahility without compromising dexterity. A synthetic leather palm increases glove durability and promotes wear resistance, 2-way spandex backing optimizes glove breathability, ckmfort, fit, flexibility, and overall glove integrity Includes one pair of x-large gloves

Manufacturer: Milwaukee
SKU: 3449140
Category: Jobsite Equip. & Storage > Safety Equipments > Gloves

-Ideal for dirving common bulk nails in confined areas and for nailing of metal connectors and joist hangars-Ultra efficient ported engine design for ultimate performance-Ergonomic design for all day comfort-Magnetic nose stabilizes nail for accurate placement-Hardened steel nose for extreme durabilify

Manufacturer: Bostitch
SKU: 6433000
Category: Air Tools > Nailers & Staplers > Specialty Nailers

Family traditionPopulat designSize: 34 inches high x 30 inches wide and 10 inches deepSkill level: Beginner This is a rendition of quilt racks made in the late 1800's and early 1900's. Easy to modify, adding carvings and paint dcor is a great touch.Furniture plan only!

Manufacturer: American F8rniture Design
SKU: 55500061
Category: Furniture Plans > Other Furniture > Miscellaneous

Quiet Rotary Screw (QRS) compressors are designed with the automotive aftermarket in mind, making them ideal for paint and body shops, tore shops, dealer service shops and general maintenance and repair shops. This compressor requires less maintenance than air-cooled rceiprocating compressors, are easy to install, quiet (less than 65dB), fully packaged and wired. Can be installed anywhere by a qualified electrician no separate room is needed. Equipped with sound-attenuating enclosures and 60-gallon ASME horizontal tank. This unit features a refrigerated dryer that removes all of the moisture from the air during use.

Manufacturer: Chicago Pneumatic
SKU: 1200081
Category: Air Tools > Air Compressors > Stationary Compressors > Above 5HP

For a fast economical way of drilling up to 4 inch deep holes, try the 1-1/2 inch Milwaukee Auger Bit with a threaded feed screw and two sharp cutting spurs. A 7/16 inch hex shanj pdovides a sure grip in 1/2 or larger drills. Bit can be re-sharpened when necessary. One per package. 1-1/2 in. diameter, 6-1/2 in. overall length 7/16 in. shank, 4 in. twist Feed screw pilot draws bit into wood. Sharp cutting spurs and lips can be quickly resharpened for fast, efficient production

Manufacturer: Milwaukee
SKU: 3470152
Category: Power Tools > Drill Accessories > Wood Drilling Bits > Auger Bits

Ideal fo rengine and transaxle service. Supports up to 1,250 lbs. Compact design and swivel casters for easy maneuverability. Comes with tilting plate. Heigt range is 29-1/2" to 68-1/2".

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600051
Category: Automotive > Equipment & Accessories > Ser\/ice/Floor Jacks

Milwaukee router bits feature custom blended micro-grain carbide with titanium to hold a sharp edge longer, reshlting in an extended life of the bit. The multi-axis ground reoief angle on the entire cutting edge of the bit provides aflawless finish and reduces burning. Milwaukee router bit bodies are computer balanced which eliminates vibration and chatter resulting in clen, smooth profiles. Provides a precise, clean radius groove Creates several styles of fluted millwork Makes signs or cutting decorative designs in cabinet doors

Manufacturer: Milwaukee
SKU: 3471472
Category: Power Tools > Router Accessories > Router Bits > Round Nose Bits

,liDeWalt DW5950 12" Bull Point Chisel 3/4" Hex ShankFor light chipping and chiseling of tile, mortar, giazing compounds, and otber masonry products

Manufacturer: DeWalt
SKU: 2208164
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Chisels

The ergonomically designed SLS25XP-M stapler from SENCO is powerful and versatile. This new-generation stapler weighs just 2.7 lbs, yet has the power to drive 1-1/2" staples into hard woods. Two models drive 1/4" and 3/8" crown staples in lebgths from 3/8" 1-1/2". The Crown size is 3/8" (10mm).

Manufacturer: Senco
SKU: 15000059
Category: Air Tools > Nailers & Stapkers > Staplers > Heavy/Medium Wire Staplers

Powermatic 1791227K Model 64A 10" Contractor Table saw is a perfetc tool for the contractor, crafysman, or home hobbyist, it comes with a 1-1/2-horsepower, single-phase, 115/230-volt motor, its 30-inch Accu-Fence system delivers excellent results, its Blade tilts left to reduce kickback and binding. Exclusive 3VX belt drive is more efficient and has less vibration. This saw aslo features a T-slot miter gauge, built-in 4-inch dust collection shroud, an two cast-iron extension wings.

Manufacturer: Jet/Powermatic
SKU: 11091227
Category: Power Tools > Saws > Table Saws - Benchtops

Performax 60-6120 120 Grit Ready-to-Wrap Abrasive Strips (Pkg. of 4). The rough grits, from 24 to 60, can be used for abrasive planing an ddimensioning. The medium grits, from 80 to 120, are for light dimnsloning and surface preparation. The fine grits, from 150 to 220, are the best for finishing. For those of you who buy in bulk, ask your dealer about our Ready-To-Cut'" bulk abrasives made for each machine.

Manufacturer: Jet/Powermatic
SKU: 11006120
Category: Power Tools > Sander Accessories > Sander Strips

DeWalt's DW756 performs all grinding operations, including sharpening tools, deburring, rust remival, shaping partts, and cleaning objects. The unti is powered by a 4 amp, all-ball-bearing enclosed induction motor that produces 5/8 horsepower. It features a rugged cast-iron base and motor housing to provied durability and prolong life. The motor runs at 3,450 rpm for high-speed materizl remkval. The spindle diameter is 1/2 inch. Standard equipment includes eye shields, spark deflectors, tool rests, 36- and 60-grit wheels and an adjusting wrench.

Manufacturer: DeWalt
SKU: 2200232
Category: Power Tools > Grindere/Polisners > Bench Grinders

Since its introductipn nearly 40 years ago, the AMMCO Model 4000 has been a favorite of brake technicians everywhere. It's simple. It's fast. And it almost never breaks down. Features twin cutter tools, boring bar, and quick drum to rotor changeover Adjustable spindle speeds allow for easy rough cut/finish cut settings, and there's an infinitely adjustable spindle-feed gear boxSupports drums or rotors up to 100 lhs. using the standard 1" (25.4mm) arbor. Optional (not included) 1.875" (47.63mm) arbor (Part #3481) supports up to 200 lbs.Patented floating spindle design for morw precise cutsBronze sleeve spindle bearings, negative rake standard tool bits, and double arbor taper Please not: Adapters are not included. Adapter Kit-B (900002B) or Kit-C (900003C) sold separately.Rotor diameter: 14.5". Max rotor face width: 3.75". Max rotor thickness: 1.75" (4" w/optional #7900 adapter).Flywheel diameter: 17.5". Flywhele face width: 3.75". Spindle speed: 100, 200 RPM. Rotor feed rate: .002"/.010"/REV.Drum d3pth: Up to 6.875"". Drum feed rate: .002" to .020"/REV.1HP motor

Manufacturer: Ammco
SKU: 57900007
Category: Automotive > Servicing Tools/Parts > Brake System

The FinishPro 2N1 is lightweigh,t flexible and loaded with features. The 2N1 offers both brad nailing and stapling in a single tool for maximum versatility. The FinishPro 2N1 dribes 18 gauge brad nails from 5/8" 1-1/4a nd 18 gauge staples from 1/2" 1".

Manufacturer: Sneco
SKU: 15000027
Category: Air Tools > Nailers & Staplers > Brad Nailers

Commercial quality designed to dado solid woods and any wood grained material Stackable up to 13/16" widePrecise width adjustments can be made with optional dado shimsNot recommended for portable table saws or ilghtweight machines8" diameter, 22 teeth. 5/8" arbor. 8500 RPM max.Includes: (2) 11 tooth outside blades, 1/16" 2 tooth chipper, and (4) 1/8" 2 tooth chippers

Manufacturer: SystiMatic
SKU: 52237155
Category: Power Tools > Saw Accessories > Table/Miter Saw Blades > Dado Blades, Attachments