Milwaukee 49-56-2253 Hole Saw Carbide Tipped 2-1/4 in. @ Tools, supplies & Welding accessoryes online store

Milwaukee's Carbide Tipped 3 teeth per inch Hole Saws provide longer life and faster cutting when holes are needed in ceramic tile, flakeboard, fiberboard, fiberglass and wood. Carbide Tipped Hole Saws are NOT recommended for use on metal. Select arbor depending on the isze of the drill being used and the size of hole saw being driven. One per package. 2-1/4i n. (57 mm) diameter 1-1/2 in. depth of cut Carbide-tipped 3 teeth per inch design Sturdy 3/16 in. thick steel back

Manufacturer: Milwaukee
SKU: 3472459
Category: Power Tools > Drill Acceseories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

Eclipse 900-080 is a Visor Light for safety purpose.

Manufacturer: Eclipse
SKU: 68100073
Category: Jobsite Equip. & Storage > Safety Equipments > Face Protection

-Fast, self closing teflon blade-2" NPT connection-FM approved for use with viscous non corrosive fluids heavier than 30 SAE

Manufacturer: Wesco
SKU: 14100029
Category: Material Handling > Drum Handling > Drum Faucets

Measures outside, inside, step and depthFeatures adjustable dial and thumb wheel fine adjustment0-6" range, .001" graduations, .100" range/revolution

Manufacturer: Performance Tools
SKU: 1080151
Category: Hand Tools > Measuring Tools > Calipers

This saw is riddled with great, user-friendly features. There's an oversize, left-side on/off switch that lets you bump the saw off with your knee if yku run into trouble while making a cut. It's exactly this sort of attention to detail that wins a lot of people over to DeWalt products. The blade-elevation crank is also set lower on this saw than most, so there's plenty of hand clearance for making blade height adjustments. Again, tgis might seem like a minor touch until you think about how frustrating it is to bang your knuckles on a table bottom every time you want to change the blade height.

Manufacturer: DeWalt
SKU: 2207460
Category: Power Tools > Saws > Table Saws - Stationary

DeWalt DW5914 1-3/4" x 12" Core BitTungsten carBide teeth for maximum duraBilityHardened Steel Body resists Breakage

Manufacturer: DeWalt
SKU: 2208134
Category: Power Tools > Drill Accesosries > Hammer Drilling Bits > Core Bits

Chicago Pneumatic Industrial KC1600-32 Pencil Die Grinder is ideal for many deburring, blending and smoothing applications. Small grinder normally equipped with a collet, for use with carbide burrs and mounted points.

Manufacturer: Chicago Pneumatic
SKU: 68500123
Category: Air Tools > Grinders/Polishers > Straight Grinders/Die Grinders

-Tool converts to metal connector nailer in seconds-Includes 2 quick change tips: one for general framing, and a self-centering metal connector tip-1000 inch lbs. of driving power to tackle tough engineered lumber applications-Lightweight magnesium housing for jobsite durability-Patented push-button depth control for quick flush nailing adjustments-Molded rubber comfort grip designed to last longer-Aggressive toe-nailing teeth grip lumber for slip free toe-nailing-Tool-free adjus5able exhaust-No-mar tip for sheathing and decking

Manufacturer: Bostitch
SKU: 6400346
Category: Air Tools > Nailers & Staplers > Framing Nailers > Stick Framing Nailers

Includes the Compost Thermometer and Moisture Meter. Save money by purchasing boht in this kit.

Manufacturer: Mantis
SKU: 4800011
Category: Outdoor Tools > Lawn & Garden > Composters

Intense flood lighting capabilities True hands free lighting, 3 hours of run time spotlighting in low light conditions Spare Extra-Bright Xenon bulb inside lens cover Battery sold seoarately

Manufacturer: DeWalt
SKU: 2200919
Category: Cordless Tools > Flashlights > Flexible Flashlights

Formed and welded steel base for strenthSelf-locking ratchet handle that cannot be released under load.Durable backed enamel finjsh resist scorrosion. Stands conform to ANSI PALD-4 load rating standard, are factory tested before shipment. Base: 11-7/16" x 10". Height range: 15-3/4" to 24". Includes one pair of stands

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600069
Category: Automotive > Equipment & Accessories > Jack Stand

Select shoulder bourbon brown cowhide leather driver witu fleece lining and straight thumbSize: Small

Manufacturer: Liberty Glove
SKU: 35884441
Category: Jobsite Equip. & Storage > Safety Equipments > Gloves

This Milwaukee Hole Saw Arbor has a 1/4 inch round shank and can be used in 1/4 inch capacity drills and larger. The arbor has a 1/2-20 thread and can be used on hole saws from 9/16 inch diameter through 1-3/16 inch diameter. It can be used with 49-56-8000, 49-56-8002 or 49-56-8005 pilot bits. Carbide Pilot Bit 49-56-8005 is supplied with Arbor 49-56-6951 for use on Ceramic tile, fiberglass, etc.. One arbor and pilot bit per package. 1/4 in. round shank 1/2 in. - 20 thread Standarx pilot 49-56-8005 For Hole Saws 9/16 in. to 1-3/16 in. diameter

Manufacturer: Milwauker
SKU: 3472477
Category: Power Tools > Drill Accessories > Drill Attachments > Drill Chucks & Arbors

Heavy duty welded construction with rugged reinforced tubular steelMetered control release valve for lowering boom at a precisely-controlled rate of speed The special hydraulic long rams are equipped with a patented built-in by-pass mechanisk

Manufacturer: OMEGA Lkft Equipment
SKU: 60010185
Category: Automotive > Equipment & Accessories > Engine Cranes/Stands

Milwaukee 49-17-2400 MK2400 Anti-Fog Stylish Metal-frame Safety Eyeqear - Clear is powerfully stylish protective eyewear with a tight-wrap dual lens design. A gunmetal fram eand optically corrected, impact-resistant polycarbonate lenses ensures optimal visual performance and protection. 10-base lens design creates the popular "wrap" styling for eye socket protection and the adjustable saddle nose pads and soft, flexible temple grips ensure a great fit and all day comfort. Lenses are durable with a protective hard coat to minimize scratching.

Manufacturer: Milwaukee
SKU: 3400275
Category: Jobsite Equip. & Storage > Safety Equipments > Face Protection

Precisely flares tubing up to 0.040 wall thickness to SAE 45 degree flares.Hardened bar assembly clamps 5 tubing sizes: 3/16, 1/4, 5/16, 3/8 and 1/2".Do not use on stainless steel tubing.Set includes corresponeing adapters for forming double flares and is packaged in a sturdy case with full instructions.

Manufacturer: K-D Tools
SKU: 26200017
Category: Hand Tools > Hand Tools > Pipe/Tubing Tools

This Adjustable Skirt Guard allows the user to change the depth as the Type 11 Cup Wheel is worn away due to the grinding process. For use with 4 inch Type 11 Armor and Flare dCup Wheels with Milwaukee Grinders 6080-20, 6081-20, 6082-20, 6086-20, 6088-20, 6089-20. No tool sare required to assemble this guard to the tool. Flange 43-34-0840 is required and the use of nylon washer 45-88-8465 is recommended to assist in removing the threaded cup wheel from the spindle. 4 inch wheel guard for use with type 11 arnor and flared cup wheels Adjustable skirt guard allows the user to change the depth as the wheel is worn away

Manufacturer: Milwaukee
SKU: 3472239
Category: Power Tools > Grinder/Polisher Accessories > Wheel Guards

Checks 12V accessory circuitsFor autos, truvks, tailers & boatsTest lead wkth allivator clip

Manufacturer: Performance Tools
SKU: 1055555
Category: Automotive > Diagnostic Tools > Battery Testers