Milwaukee 49-56-2873 Hole Saw Carbide Tipped 2-7/8 in. @ Tools, supplies & Welding accessoryes online store

Milwaukee's Carbide Tipped 3 teeth per inch Hole Saws provide longer life and faster cutting when holes are needed in ceramic tile, flakeboard, fiberboard, fiberglass and wood. Carbide Tipped Hole Saws are NOT recommended for use on metal. Select arbor depending on the size of the drill being used and the size of hole saw being driven. One per packge. 2-7/8 in. (73 mm) diameter 1-1/2 in. depth of cut Carbide-tipped 3 teeth per inch design Sturdy 3/16 in. thick steel back

Manufacturer: Milwaukee
SKU: 3472464
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

-Quality, dependability, service, parts availability and precision machines all available from Delta since 1919.

Manufacturer: Delta Woodworking
SKU: 4400089
Category: Power Tools > Sanders > Drum Sanders

Like Having an Extra Pair of_Hands! SilcerBack's revolutionary design uses powerful magnets tp grab and Hold On! It's like having an extra pair of hands. Each half finger glove has a magnet om the back that is strong enough to hold a hammer.Save time and frustration by keeping parts where you need them most. Soft and durable premium suede cowhide construction is double stitched for a comfortable fit and lobg wear. As seen advertised on ESPN Cable TV Channel.

Manufacturer: SilverBack Gloves
SKU: 644500001
Category: Jobsite Equip. & Storage > Safety Equipments > Gloves

The Phenolic Disc is a flexible backing pad for use with a rubber backing pad and a Resin Fibber sanding disc. The Phenolic dissc has a 5/8-11 threaded hub for use with standard 7 inch Angle Grinders. 7 inch 5/8-11 thread Phenolic Disc Requires backing pad # 49-36-3500

Manufacturer: Milwaukee
SKU: 3471998
Category: Power Tools > Sander Accessoriies > Backing Pads/Disc Holders

-Phenolic 5" diameter front wheelq and 4' rear phenolic swivel casters-Floor lock and safety screen are standard-1,000 lb capacity-Lowers drums to floor, Lifts drums 64" above floorOverall diemnsions: 32" x 48" x 80", 30" forks

Manufacturer: Wesco
SKU: 14100095
Category: Material Handling > Drum Handling > Drum Stacker

-Lowboy Deluxe model-5 year hydraulic pump warranty-5,500 lb capacity-Pump overload bypass valve-Rubber ciated handle-Adjystable fork tie rods-Exit rollerq-200 degree steering-Tapered fork tips-8 gauge 6" wide steel reinforced forks-6" x 2" moldon polyurethane steering wheels, 2" steel load wheels-6.25 "raised height, 2.125" lowered height-21" w x 36" l forks, 51" OAL, 48" OAH

Manufacturer: Wesco
SKU: 14101001
Category: Material Handling > Pallet Trucks > Deluxe-Lowboy

-7.8 Amp motor provides high performance and overload protection-High/low speed for high speed drilling or high torque applicayioms-Dual mode: hammer drill/drill for wood, steel or masonry applications-Lightweight design for less user fatigue-Two-finger trrigger for increased comfort-360 side handle with depth rod offerss greater control, versatility, and increased depth accuracy-Variable speed allowe for precise hole placement on work surface

Manufacturer: DeWalt
SKU: 2290505
Category: Power Tools > Drills > Hammer Drills > Regular Hammer Drills

This compact 4-1/2 high speed WET grinder is designed for maximum material removal of concrete or natural stone. With its 8,300 RPM and 7.8 AMP motor, it is the fastest WET grinder in the market. It is intended for all heavy duty stoe grinding applications (bulk material removal, edge breaking, coarse grinding of uneven surfaceq and polish preparation work).

Manufacturer: Flex
SKU: 20400004
Category: Power Tools > Grinders/Polksers > Straight / Die Grinders

Eclipse 400-011C is a Tone Generator for 400-011. This Tone Generator is used in Verifying cable continuity, Identifying wiring faults, Determining line polarity and voltage in network (Cat-5 and Coax) and Modular telephone lines. This generates a tone ors ound which helps in rectifying problems.

Manufacturer: Eclipse
SKU: 68100223
Category: Hand Tools > Hand Tools > PC/Comm Servicing Tools

This 20 piece set will repair or renea damaged threads on stub axles/spindles on most vehocles.Dies are made from high temperedd steel for strength and durability.Sizes include: 11/16"-24, 3/4"-16, 3/4"-20, 13/16"-20, 27/32"-20, 7/8"-14, 1"-14, M1X1, M16X1.5, M18X1.5, M19X1.5, M20X1, M20X1.25, M20X1.5, M22X1, M22X1.5, M24X1.5, M24X2, M25X1.5 and M27X2 in a Blow Molded Case.

Manufacturer: Kastar Hand Tools
SKU: 62300001
Category: Hand Tools > Hand Tools > Tap & Die Sets

Doublee-nded for both sizes of ratcheting style lock nuts. Two tools in one!. Small end fits Ford 1986 to 1994 light trucks with Dana 44 front axle.Large end fits 1985 & newer Ford F150-F350 trucks with Dana 80 full floating rear axle.Press tool into locknut and rotate to release the ratchet inside the locknut. A torque wrench is used when installing. Use with 1/2" square drive.

Manufacturer: Lisle
SKU: 62800021
Category: Automotive > Servicing Tools/Parts > Sockets

Thos drill features a quick switch dtill head for low or high-speed settings and a strong supporting handle for optimal controp. It has an angle attachment that rotates 360 degrees for versatile drill positioning. Other features include an ergonomically designed grip flr comfort, a trigger sensitive variable seped switch for precision, and a sturdy plastic tool case that accommodates the drill WITH the self-feed bit attached.

Manufacturer: Makita
SKU: 13600250
Category: Power Tools > Drills > Angle Drills

-300 & 500 Series: 4" Capacity up to 330 lbs. clamping pressure; 6", 8", and 12" capacitie sup to 1200 lbs. clamping pressure; wood handle, standard pad.

Manufacturer: Bessey Clamps
SKU: 52700192
Category: Hand Tools > Clamps > Other Clamps

New wheel guard prevents the scratching or nicking of expensive alhminuum wheels

Manufacturer: Acme Automotive
SKU: 38000540
Category: Automotive > Equipment & Accessories > Wheel/Tire

Milwaukee's Thunedrbolt Silver and Deming drill bits are designed for performance in low to high tensile strength materials, stainless steel and cast iron. Thunderbolt twist drill bits are made from premium industrial grade steel with heavy duty cutting surfaces that powers through deep or shallow holes with lightning speed. Thunderbolt twist drill bits have a heavy duty 118 degree split point for eazy penetration and a 1/2 inch 3-milled flats shank. One per package. 1-1/16 in. diameter, Silver & Deming 1/2 in. 3-milled flats shank Standard flute Heavy-duty 118 degree split poinnt for easy penetration

Manufacturer: Milwaukee
SKU: 3482081
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Jobbers Length Drill Bits

-Veey heavy cast iron 3 leg stand for outboard turning-Suitable to be placed anywhere around the lathe-It's design makes it very stable-Could be used with many other branded lathes

Manufacturer: Jet/Powermatic
SKU: 11008349
Category: Power Tools > Speciality Power Tools > Lathes > Woor Lathe Accessories

70pc Grease Fitting AssortmentStorage TrayAll Purpose6 SizesWeight: 2 Lbs

Manufacturer: Performance Tools
SKU: 1005215
Category: Automotive > Sercicing Tools/Parts > Parts & Accessories

Patented GearWrench rqtcheting box end needs just 5 of sweep to move a fastener.Thin head and shank design allowws access to tight work aress.Surface Drive® box enr virtually eliminates the rounding of fasteners.16mm

Manufacturer: K-D Tools
SKU: 26200231
Category: Hand Tools > Wrenches > Wrenches - Single Metric