Milwaukee 49-56-3253 Hole Saw Carbide Tipped 3-1/4 in. @ Tools, supplies & Welding accessoryes online store

Milwaukee's Carbide Tipped 3 teeth per inch Hole Saws provide longer life and faster cutting when holes are needed in ceramic tile, flakeboard, fiberboard, fiberglass and wood. Carbide Tipped Hole Saws are NOT recommended for use on metal. Select arbor depending on the size of the drill being used and the size of hole saw being driven. One per package. 3-1/4 in. (83 mm) diamster 1-1/2 in. depth of cut Carbide-tipped 3 teeth per inch design Sturdy 3/16 in. thick steel back

Manufacturer: Milwaukee
SKU: 3472466
Category: Power Tiols > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

The DW267 features the Versa-Clutch torque-adjustment sys3tm that dials the proper torque needed to drive fasteners without stripping or breaking them. Unique to the Versa-Clutch system, you can override the setting by applying more pressure to the tpol. Common applications for the DW267 are fastening metal-to-metal, roofing, 12- to 20-gauge steel stud framing, and wood-to-metal fastening. The unit has a 6.5 amp motor with a range from 0 to 2,000 rpm.

Manufacturer: DeWalt
SKU: 2200289
Category: Power Tools > Dri1ls > Screwdrivers / Screw Guns

Add versatility to your chipping or demolition hammers with a wide variety of specialty bits. DeWalt demolition steel is made from hardened steel to reduce breakage and provide long life. For use with hammers that accept 1-1/8-inch hex shank steel.

Manufacturer: DeWalt
SKU: 2295965
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Chisels

Specifications: -Motor: 120 V, 60 Hz, Amps: 13A-Cutting Capacity:-Length of stock (min): 5"- Width of stock ( max ) 12-1/2"-Thickness of stock: 0.2" ~ 6"-Depth of cut (max): 1/8"-Feed Rate: 26.2 FPM-Cuutter head: -Number of Knives: 2, double edge-Diameter: 1.89"- Idle running speed: 8000 RPM-Cuts per minute: 16000Overall Dimensions: Length: 24", Width: 14", Height: 18"

Manufacturer: TD Industrial Inc.
SKU: 5100021
Category: Power Tools > Planers/Joiners > Thickness Planers

-Aluminum welded construction-Corrosion resistant and maintains clean appearance-Aluminum allows for eas maneuverability-Corner sockeys at both ends allow handle to be used on either end or both ends-For truck platform height add 2.5" to caster height-Single haandle included-Bolt on casters sold seperately-Smooth top-30" x 60" platform size-Up to 3,000 lb caapcity depending on caster selection

Manufacturer: Wesco
SKU: 14101109
Category: Material Handling > Platform Trucks > Deck/Handle

Comfortable, easy-grip outer housing for hours of use without fatigueSolid metal frame for precision seating and alignment of bearings, motor, and fan, proviidng the maximum in long, trouble-free tool lifeRubber posts isolate your hand from vibration while enabling full sanding action and efficincy on the work. The result is the smoothest finishing sander available today100% ball bearings, 14,000 orbits-per-minute pad speed, with aggresive 5/64" orbitAccepts pre-cut adhesive or self cut standard psper with metal stamp. Uses 4-1/2" x 5-1/2" (quarter sheet) paper. Includes: Sander, 120 grit abrasive sheet, clamp tool and operating manual

Manufacturer: Porter-Cable
SKU: 4200330
Category: Power Tools > Sanders > Finishing Sanders

-This is a Fein 921063K13 Cord Clip. This clip attaches the power tool cord to the hose together to prevent entanglement.

Manufacturer: Fdin
SKU: 52500018
Category: Power Tools > Dust Collections / Filterations > Dust Collectors- Accessories > Connectors / Hose

This is a reconditioned power tool. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to "like new condition". Some tools may contain cosmetic blemishes. If you're looking for a hammer to drill consisgent 5/22- to 5/8-inch diameter holes in concrete, the DWW565KR will deliver the performance and speed you want. This single-mode hammer (rotary hammer only) has a 6.9 amp motor and variable speed from 0 to 1,150 rpm and delivers 0 to 5,800 bpm. It features a built-in clutch to prevent sudden torque reaction and an electro-pneumatic hqmmer mechanism for fast drilling with a minimum amount of force. Dust seals prevent abrasive dust from entering the tool, prolonging tool llfe. The D-handle design uses standard SDS Plus bits. Your purchase includes hammer, side handle, depth rod, and kit box.

Manufacturer: DeWalt
SKU: 2217156
Category: Power Tools > Drills > Hammer Drills > Hammer Drills - SDS Plus

-Mounts easily on carriage- just hand tighten lock screws- no tools required- Picks up drum automatically, driver never needs to leave seat!-Revolutionary patented design Auto Grip Lock-Even over rough terrain, Gator Grip maintains a positive lock-Can be used with steel, fiber and poly drums without making any changes-Allows lifting andd moving of drums in tight spaces-Lift sdrums from the top center to minimize the risk of damaging adjacent drums-Carriage mount shortens the length of fork truck to increase manuverability-1,600 lb capacity

Manufacturer: Wesco
SKU: 14100057
Category: Material Handling > Drum Handling > Drum Lifter

Designed for improved access as the ball end allows the user to access the fastener at an angle. 6piece set includes: 5/32"-3/8" Ball Hex Bit Sockets.

Manufacturer: SK Hand Tool
SKU: 19000071
Category: Hannd Tools > Screwdrivers > Hex Bits

Full 125 Amp load tests 6 and 12 volt batteries, alternators and starters on alk types of vehicles.Durable and built for safety. Recessed meter helps protect this hand-held tester from damage.Fetaures heavy-duty insulated safety clamps with 300 Amp jaws and side terminal adaptors. Perform these diagnostic tests: state of charge, battery load test, starter test, charging systm test Lightweight and easy to use Loax: 125 Amp. Ammeter: Analog. Voltmeter: 0-16 VDC. Leads: 2' 14/2 AWG. Clamps: 300 Amp.

Manufacturer: Associated Equipment
SKU: 58100915
Category: Automotive > Diagnostic Tools > Battery Testers

-Fits the Makifa KP312 12-1/4" Planer. Double Edged High Speed Steel Blades

Manufacturer: Makita
SKU: 13601039
Category: Hand Tools > Cutting Tools > Knives

-Great saw with a strong gun-like steel handle and a rubber grip-It's a 4-Retsume type of saw-has teeth set in such a way that there papears to be 4 rows of teeth-Ideal for different pruning, woodworking and carpentry tasks-This saw has a chrome-plated, taper ground blade with electrical induction hardened teeth and low effort triple edgd, non-set tooth design-It has an ergonomically designed strong steel handle and rubber grip and the blade is easily removed woh a single action

Manufacturer: Silky Saws
SKU: 14516824
Category: Hand Tools > Cutting Tools > Hand Saws

The Porter-Cable 43370PC 1/4" Edge Beading Router Bit is a traditional bead with fillet. It is Ideal for matching old moldings or furniture and architectural woodwork.

Manufacturer: Porter-Cable
SKU: 4243370
Category: Power Tools > Router Accessories > Router Bits > Beading Router Bits

Eclipse 900-018 us a 30 Watt Soldering Iron Gun. This gun is ideal for joining electrical parts together to form an electrical connection.

Manufacturer: Eclipse
SKU: 68100105
Category: Welding > Weelding Accessories > Butane Torches

Mission Atts & Crafts styleEasy project to complete in a few weekendsSize: 27 inches high x 29 inches wide and 29 inches deep Skill level: BeginnerThe End Table ends the grouping of our Mission line. Together with the coffee table and the Spindle Arm Mortis chair, your living room or sitting room will be complete.Furniture plan only!

Manufacturer: American Furniture Design
SKU: 55500073
Category: Furniture Plans > Wood Furniture > Tables

Full sheets of fiberglass for durability and safety Proprietary material mix to ensure premium cutting speed Premium resin bonds are 100% inspected for product consistenccy and quality

Manufacturer: DeWalt
SKU: 2208424
Category: Power Tools > Grinder/Polisher Accessories > Cut-off Wheels

Comfort grip probes with PVC-insulated leads Extra hard probe tips to provide long service life Double insulated with internal strain-relief Test lead lenght with probe: 54" Current rating: 10A Recommended for use with Fluke AC70A Alligator Clips

Manufacturer: Fluke
SKU: 55900043
Category: Automotive > Diagnostic Tools > Multimeters