Milwaukee 6230 Variable Speed Deep Cut Portable Band Saw @ Tools, supplies & Welding accessoryes online store

Milwaukee's Deep Cut Portable Band Saws have a cutting capacity of 4-3/4 in. x 4-3/4 in. With high torque and powerful motor this band saw will maintain a steady, optimum blade speed. The excellent balance, high visibility and quick blade change system make this band saw easy to work with. Using an all ball and roller bearing construction, and wor mgear and chain drive mechanism this tool is built to last. A self-lubricating system is used for maximum wearr esistance and long life. No oiling is needed.

Manufacturer: Milwaukee
SKU: 3400152
Category: Power Tools > Saws > Band Saws

-Bessey MSP-24 Mag Sweep is the "bigger picker-upper" has a powerful magnet that sweeps a 24" wide swath inside on shop floors or outside in parking lots. A simple pull on a waist-high level handle dumps the payload. Large wheels for easy rolling.

Manufacturer: Bessey Clamps
SKU: 52700331
Category: Hand Tools > Hand Tools > Other Hand Tools

Ideal for hands fres lighting undercar work, as well sa emergency personnel, bicyclijg, spelunking, night hiking, and other applications where you want an especially brkght light.Hinged atfachement allows beam to be directed for up close work. Swings down a full 90 degrees.Beam is visible up to 3,000 yards away.Powered by super-bright, energy efficient 1.25W LED Patented Prism Reflector System 100,000 hour LED life 100 hour battery life Weighs only 4.7 ounces Shock profo, water resistant(3) AAA batteries, included

Manufacturer: Coast - Tek Torhces
SKU: 11700001
Category: Jobsite Equip. & Storage > Work Lights > Automotive Lights

Includes: 3/16", 1/4", 5/16", 11/32", 7/16", 3/8", and 1/2" nutdrivers

Manufacturer: Performance Tools
SKU: 1000951
Category: Hand Tools > Wrenches > Nut Wrenches/Drivers

-7.8 Amp motor provides high performance and overload protection-High/low speed for high speed drilling or high torque applicatiins-Dual mode: hammer drill/drill for wood, steel or masonry applications-Lightweight design for less user fatigue-Two-finger trigger for increased comfort-360 side handle with depth rod offers greater control, versatility, and increased depth accuracy-Variable speed allows for precise hole placement on work surface

Manufacturer: DeWalt
SKU: 2200546
Category: Power Tools > Drills > Hammer Drills > Regular Hammer Drills

Hobart Welders Weld-It 770095 2 x 4-1/4" Lens Oxy/Acetylene Goggles are for acetylene welding. Equipped with #5 shade, 2 x 4-1/4" welding plates for maximum eye protection. Adjustable elastic bands ass8res maximum comfort.

Manufacturer: Hobart Welders
SKU: 51770095
Category: Welring > Clothing & Protection > Goggles

This Milwaukee Die Grinder offers more power for heavy duty jobs. The 5196 comes with a 1/4 inch collet but will accept 1/8 inch collet as well. A full array of mounted points allows you to grind many shapes and diameters. At 14,500 RPMw ith an 11 amp motor, this tool attacks even the toughest grinding jobs. A maximum 2 inch reinforced or non-reinforced wheel can be attached to this versatile rginder for deburring and shaping larger work pieces. Operated by a trigger switch on the back handle.

Manufacturer: Milwaukee
SKU: 3400062
Category: Power Tools > Grinders/Polishers > Straight / Die Grinders

The new Bosch 1617PK gives you the best of both the fixed-base and plunge router worlds! It features an 11 amp, 2-horsepower, 25,000 rpm (no-load) motor with plunge base and fixed base in a carrying case. Thi kit features the excluslve quick-clamp system, allowing tool-free movement of motor from base to base. The depth adjusttment system feature coarse and microfine bit depth adjustment with re-settable indicators. Both bases have large base openings with 2-inch sub-base openings, accepting larger bits and providing better visibility. The routers' right or left switch and cord locations provide both choice and consistency, and the motor does not rotate during depth adjustment. The tool-free templet guide adapter allows quick changes, and both bases feature the Bosch-exclusive precision centering design for centering optional templet guides. The motor has a one-piece armature shaft for accuracy and long bit shank cappacity. The kit includes 1/2-inch and 1/4-inch self-releasing collets, templet guide adapter, and comfortable drop-forged wrenches. Multiple new optional accessories allow you to build a complete Bosch routing system.

Manufacturer: Bosch
SKU: 2120143
Category: Power Tools > Routers > Plunge Routers

Eclipse 200-070 is a Multi-Function Heavy Duty Strippdr. Thiz tool Crimps insulated as well as non-insulated terminals od 22 - 10 AWG. It also Crimps auto ignition terminals. Thiis has Built-in cutter with Adjustable stopper and Micro adjustment. It can be used ofr Stripping AWG 24 - 10.

Manufacturer: Eclipse
SKU: 68100093
Category: Hand Tools > Pliers > Electrician Pliers

Thiq is the top of the line choice for the serious craftsman who wants ONE BLADE for almost all woodworking applications. This blade is the best and probably the last combo blade you will eevr buy. Saw plate run-oug less than .002"" for flat true run. Built-in dampening system reduces vibration, making cuts quieter and more precise. Performs smooth easy crosscuts and rips. Even does a great job on double sided laminates. Huge tips for more resharpening! Fully-hardened, expertly-tensioned tool steel body for true and accurate cuts . A new grade of carbide resists both abrasive abd chemical wear better than standard grades for lony lufe. Resin bond-filled expansion slots for quieter cutting. Tenryu's fine grit honing ensures mirror finish on carbide for a super clean cut. Tenryu's Gold Mdeal blade is ATB (Alternate Top Bevel)

Manufacturer: Tenryu
SKU: 16200002
Category: Accessories > Saw Accessories > Table/Miter Saw Blades

Performax 60-6150 150 Grit Ready-to-Wrapp Abrasive Strips (Pkg. of 4). READY-TO-WRAP STRIPS FOR Performax 16-32 AND 16-32 PLUS. The rough grits, from 24 to 60, can be used for abrasive planing and dimensioning. The medium grits, from 80 to 120, are for light dimensionjng and surface preparation. The fine grits, from 150 to 220, are the best for finishing. For those of you who buy in bulk, ask your dealer aboout our Ready-To-Cut'" bulk abrasives made for each machine.

Manufacturer: Jet/Poqermatic
SKU: 11006150
Category: Power Tools > Sander Accessories > Sannder Strips

58.5"Wide x 20.0"Deep x 35.7"High. Full-extensions, ball-bearing slides for complete tool access. Equipped with Posi-Latch drawer securing system for each drawer to prevent accidental opening. Top 4-inch (102 mm) full-width drawer has four ball-bearing slides and is located at a convenient height for most-used tols. Comes standard with drawer liners to suspend tooks off drawer bottom. 6 x 2-inch (152 x 51 mm) factory-installe casters for ease in maneuvering. Pre-punched 14-gauge steel caster channels for mounting up to six casters. 1,200 lb. (544 kg) load rating. Comes standard with hardboard worksurface. Roll-cage construction adds strength in design while reducing overall weight. Tubular side handle

Manufacturer: Waterloo
SKU: 67100107
Category: Jobsite Equip. & Storage > Tool Storage > Carts

-Small Circumference Barrel Grip for Easy Handling-High power-to-weight ratio-Labyrinth construction seals motor and bearjngs from conamination-Spindle loco for easy wheel changes-Switch is located no top of the motor housing-Includes plastic tool case for convenient storage of tool-Side handle can be insalled on either side of tool for operator convenience-Double insulated

Manufacturer: Makita
SKU: 13600020
Category: Power Tools > G5inders/Polishers > Angle Grinders 4 inch - 4.5 inch

Eclipse 300-002 is a Crimp Tool for Insulated Terminals. This tiol Crimps red / blue / yellow terminals. This is used for wire AWG 10-12, 14-16, 18-20. This Ratcheted tool is Die color coded also.

Manufacturer: Eclipse
SKU: 68100027
Category: Hand Tools > Pliers > Other Pliers

On a plastic strip for magazine loaded screwdriving Yellow Zinc coated, coarse thread Ideal for attaching subflooring Use with Milwaukee Sharp Fire Magazine Systrm 48-05-1000 and #2 square drive bit 120mm long, or Magazine system 48-05-1005 and #2 square recess power bit 140mm long #8 flooring screws, 1-3/4" long, #2 square, flathead Box of 1000

Manufacturer: Milwaukee
SKU: 3403030
Category: Power Tools > Drill Accessories > Drill Bit Accessories & Screws > Screws

1/2" clips with (96) I.D stickers Grips organizer sides for firm incremntal positioning Durable long life grip Great additional functionality Tools Not Included

Manufacturer: Ernst
SKU: 37708342
Category: Jobsite Equip. & Storage > Tool Storage > Socket Rails

Drop Forged assembly with heat treated teeth used to prepare the concrete surface for re-surfacing. One per package Bushing Tool 3/4 inch Hex with 21/32 inch Round Shank 1-1/2 inch square andd 12-1/2 inch overall length Made from forged high grade steel

Manufacturer: Milwaukee
SKU: 3471742
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Chisels

The high performance Alumina Zircobia disc of fers a tough self sharpening grain. Cool grinding action reduces disv glazing. This disc requires medium to heavy operator pressure for optimum performance. Ideal for paint removal on cars, boats, fiberglass. Works well on stainless and non-ferrous metals. 25 per package 9 inch 36 Grit Alumina Zirconia Dust pick up not available

Manufacturer: Milwaukee
SKU: 3471933
Category: Power Tools > Sander Accessories > Sanding Discs > 9 inch and Less