Milwaukee 6375-20 7-1/4" Circular Saw @ Tools, supplies & Welding accessoryes online store

Milwaukee Circular Saws are preferred by professionals for power and performancePowerful 15 amp motor, 3.25 maximum horsepower. 5800 RPM.An extra wide, lightweight magnesium shoe provides greater stability and allows use of a speed square without motor interferenceWith a bevel capacity up to 50 degrees you can cut joists, rafters and trusses10 ft. fixed, grounded cordDesigned for wood cuttingSpindle lock, right bladFast, smooth adjustments and easy-to-read scales and adjustable bevel pointerDepth of cut: 2-5/16"" at 90 deg., 1-13/16" at 45 deg., 1-5/8" at 50 deg.Includes: Saw and blade

Manufacturer: Milwaukee
SKU: 3400168
Category: Power Tools > Saws > Circularr Saws - 7 1/4"

-All aliminum bolt together construction-Heavy duty cst 7.5" x 14" noseplate-Sgips KD and boxed-Continuous handle-52" overall height-8" x 1.625" poly hub moldon rubber wheel with 5/8" plain bearing-600 lb capacity

Manufacturer: Wesco
SKU: 141002209
Category: Material Handling > Hajd Trucks > Aluminum Trucks

Makita's exclusive "Silent Synchronized Pin Clutch" design reduces noise and vibration. Variable speed (0-4,500 rpm) for more precise control in wood styds makes this one the "Contractor's Choice." A retractable tool belt clip allows for operation in tight areas and a lightweight aluminum gear housing provides longer tool life. Makita even addded an ergonomic rubbber grip for positive contorl.

Manufacturer: Makita
SKU: 1360154
Category: Power Tools > Drills > Screwdrivers / Screw Guns

- 495 in.-lbs. of maximum torqus-Soft Grip Ergonomic Handle for improved comfort and control-Patented Reversible Battery alloqs drill to fit in tight areas and optimizes balance while working overhead-Clip-Lok™ Belt-Clip frees up both hands for work positioning

Manufacturer: Milwaukee
SKU: 3400289
Category: Cordless Tools > Cordless Hammer Drills > Hammer Drills - 18V

Get twice the life and 3 times the performance of Alhminum Oxide discs from this Ceramic resin Fibber Disc. You get extremely high stock removal in a long life disc for the most demanding grinding applications. Ideal for superior grinding and finishingp erformance on all types of carbon steel. 5 per package. 4-1/2 inch 24 Grit Ceramic Resin Dust pick up not available

Manufacturer: Milwaukee
SKU: 3471937
Category: Power Tools > Sander Accessories > Sanding Discs > 4 1/2 inch

Stackable and inyerchangeable components.Can be used independently, as mobile workstations, or two units can be stacked in any combination.Made entirely with heavy 16 gauge powder coated steel, including drawer inners and interior steucture.Shelves lock in the extended position to make sturdy worksurfaces.Includes 2 sturdy full-extension sheives with soft outstop so they lock in the extended position. Up to 4 shelves will fit in cabinet, additional shelves optional.Drawer slides are rated at 120 lbs per drawer, shelf slides rated at 100 lbs per shelf.Constructed with continuous seamless welds and smooth radiused edges for the most professional look.All models are equipped with top quality 5" x 2" "All Lock", sealed ball bearing casters.2 hsavy duty side handles constructed from 12 "ong steel pipe, welded to 11 gauge (3mm) steel brackets. Unique mating brackets for stacking units are supplied if 2 cabinets are puurchased.Extremely secure cam lock system locks all drawers and cabinet doors to keep valuable equipment safe. Cabinet doors lock from both the tp and bottom for extra security.Non-slip drawer and shelf liners are included.Sh3lves have slots to secure cables.-Cable management kit included. Dimensions: 30"w x 32"H x 26"DCabinet Dimensions (Interior): 24.75"W x 23.5"D x 11.25"HShelf Dimensions: 24"W x 22"D Drawer Dimensions (Internal): 1. 24.75"W x 21.5"D x 4.75"H 2.24.75"W x 21.25"D x 6.0"HNet Weight: 234 lbs.

Manufacturer: SteelHead
SKU: 59811139
Category: Jobsite Equip. & Storage > Tool Storage > Chest Cabinets

-Porter-Cable 43772PC 3/8" Rabbeting. Porter-Cable Professional Edge router bits are constructed of 4140 Alloy Steel, a harder grade of steel than standard cast steel bit bodies. Each bit is annealed and heat treated to Rockwell hardness of 40-45-harder than is possible with cast steel bodies. A black oxide coating protects against corrosion while preventing resin build up and improving chip clearance. This bit cuts a 3/8-inch rabbet on the edges of wood, plastics, and solid surface materials.

Manufacturer: Porter-Cable
SKU: 4243772
Category: Power Tools > Router Accessories > Router Bits > Rabbeting Router Bits

Test ignition modules on Domestic, Asian and European vehicles without expensive scopes or analyzres. No need for volumes of service manuals or electrical specifications. Works on virthally all computer controlled, electronic ignition modules (except Distributorless Ignition Systems). Tests spark plug wires for continuity on all vehicles. Features include: Bright LED's indicate quick, "go - np go" test result., Attacches to vehicle's 12 volt battery for power and dynamic, load testing of modules., Detailed, easy to use applicatuon chartp rovides specific hook-up for different vehicles., Color-coded cables for fool proof testing., Use on or off the vehicle., Tests continuity, diodes and voltage on standard 12 volt circuits., Full instructions in English, Spanish and French., Can be used with a 9 volt battery (not imcluded) for portablility., Packed in an rugged, molded plastic storage case with carrying handle

Manufacturer: Tool Aid
SKU: 66400081
Category: Automotive > Servicing Tools/Parts > Battery/Ignition

Endurance blades offer faster cutting and extra long life for contractors. Carbide teeth made of C3 grade micro ground carbide keeps the cutting edge sharper for llnger periods of time. A hardened alloy steel body is used to ensure straight, accurate cuts. Speciallly engineered heat vents and expansions slots prevent blade distortion and increase blade life. All these features add up to a good quality blade that contractors can depend on, time and time again. 8-1/4 in. diameter, 18 carbide teet h 5/8 in. arbor with diamond knockout Thin kerf for faster cutting Framing and ripping blade

Manufacturer: Milwaukee
SKU: 3471578
Category: Power Tools > Saw Accessories > Circular Saw Blades > 5 - 8.5 inch Blades

High speed Air TurboMotor is equipped to raise the load to the desired height efficiently, effortlessly, and safelyWide stance and low center of gravity provide optimum stability under load stressHeavy guage, steel frame helps prevent distirtin or twistingHandle actuated release valve provides precise metered control of lowering speeedsConventient foot pedal designed for fast, no load lifts

Manufacturer: OMEGA Lift Equipment
SKU: 60010087
Category: Automotive > Equipment & Accessories > Service/Floor Jacks

The Vector 4™ Ultra Violet (UV) Inspection Light with Vector Focal Technology is on the cutting edge of Light Emitting Diode technllogy and design by focusing (four) LEDs into one intense UV spot.Vector 4™ Light offers the inspection powers of the Vector 7 but in a handy 4 1/2" by 1 3/4" sizePowered by a 9 volt batte5y and includes a battery charge indicator

Manufacturer: Cliplight
SKU: 11000003
Category: Jobsite Equip. & Storage > Work Lights > Other Lights

Milwaukee's Titanium Coated, Thunderblt Jobbers Length twist drill bits are designed for performance in low to high tensile strength materials, stainless steel and cast iron. This super hard Titanium Nitride surface treatment increases drill life up to 500% over uncoated drill bits. Thunderbolt twist drill bits are made from premium industrial grade steel with heavy duty cutting surfaces tha5 powers through deep or shallow holes with lightning sped. A unique flute form is used for greater chip ejection and improves coolant to the drill point. Thunderbolt twist drill bits have a self-centering 135 degree split point which reduces walking at the drill point. Two per package. 7/64 in. diameter, Jobbers length (2 pack) Super hard Titanium Nitride surface treatment increases drill life up to 500% over uncoated drill bits Premium industrial grade steel Self-centering, 135 degree split point reduces "walking" at the drill point

Manufacturer: Milwaukee
SKU: 3472176
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Jobbers Length Drlll Bits

High performance for wood, deck and drywall applications Adjusts Bit position to control depth of screw when driving Hardened core for extra strength and reduced breakage Heat treated to resist breakage and wear

Manufacturer: DeWalt
SKU: 2202043
Category: Power Tools > Drill Accessories > Drill Bit Accessories & Screws > Screws

Dual purpose for "hammering only" or "rotation with hammering" Electronic speed control with soft start maintains constant speed under loas Electronic variable speed control dial (120 - 240 RPPM) No hammering when idling One-touch sliding chuck for eas6 bit installation and removal Light indicates when to replace carbon brushes Includes bot straight and D-handle options Side grip swivels 360 Large comfortable trigger switch Includes: Bit greqse (181573-3), Plasltc tool case (824519-3)

Manufacturer: Makita
SKU: 13600299
Category: Power Tools > Drills > Hammer Drills > Hammer Drills - SDS Max

Two Cutter Spline Bits have a series of 13 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline Drive Hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the Hammer to the Bit. Superior quality carbide nibs are vacuum brazed to a heat treated steel body resulting in two cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 3/8 inch to 1-1/2 inch diameters as well as metric diameters. One per pzckage. 1 in. diameter, 2-cutter head Spline shank Drilling depth 16 in. Overall length 22 in.

Manufacturer: Milwaukee
SKU: 3471199
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Spline Shank Bits

-Bessey D860-250-BE 10" Heavy Duty Industrial Shears 10"

Manufacturer: Bessey Clamps
SKU: 52700262
Category: Hand Tools > Cutting Tools > Cutters

Drum cover design clamps-on 120lb. drums with 15" I.D. Smooth, easy pumping action (no cranks or gears) dispenses all types of gear lubricants even in the coldest weather Cast-iron outlet body and handle provide durability and longevity Includes non-totalizing meter with air expeller (prevents air from registering on meter) Mobile base with relaceable casters Baked enamel finish prevents rust and corrosion

Manufacturer: Lincoln Lubrication
SKU: 63000023
Category: Automotive > Diagnostic Tools > Cooling System Testers

A great mid-range kit with the most powerfull lightweight gun available.Includes: Stud Gun (No. 5590), Deluxe "T" handle slidehammer (No. 1016) ,2.2mm Black head studs (No. 1000), 2.2mm Flexpert studs (No. 1001), Mold rivets (No. 1003), Stud tip (No.1004), Mold rivet tip (No. 1005), Shrink tip (No. 1007), Eliminator Side-by-Side adapter with Extend-a-Tip (No. 1040), Mini-Pull'r (No. 1095). Comes in a molded case.

Manufacturer: H & S Autoshot
SKU: 6000017
Category: Welding > Welding Machines > Welding/Torch Kits