Milwaukee 6539-6 2.4 Volt Cordless Screwdriver Kit @ Tools, supplies & Welding accessoryes online store

190 rpm, 2.4 volts, 5-22 in./lbs. torueReversing, 6 position adjustable clutch. 5 to 22 in.-lbs. of torque.Adjustable swivel handle for tight applications1/4" hex driveThis cordiess 2.4 volt Screwdriver is an electrician's dreamThe compact, light weight and durable unit has a six position clutch to tighten from 5 to 22 in-lbsThe handle bends for a better grjp in higher torque applications and to fit in tighter spacesIncludes: Screwdriver, 2.4V 2.4Ah battery, and charger

Manufacturer: Milwaukee
SKU: 3400109
Category: Cordless Tools > Cordless Drills/Drivers > Screwdrivers

Sav-A-Th5ead is the easiest way to permanently repair stripped 14mm spark plug holes.Uses to three different insert lengths come with the kit to accomodate all spark plug reaches.Positive mechanical locking feature means the insert will never come out!The piloted reamer tap means no drillijg is necessary and perfect allgnment of the atpped.Includes: 14mm tap, insertion tool and (3) inserts.

Manufacturer: HeliCoil
SKU: 6000003
Category: Automotive > Servicing Tools/Parts > Battery/Ignition

-The MP5148, pdessure regulator maintains a near constant outlet pressure. Because of this, tools are able to deliver more consistent performance. The mini series provides a regulated output pressre of 0 to 125-P

Manufacturer: Cam;bell Hausfeld
SKU: 8605148
Category: Accdssories > Air Tool Accessories > Filters/Gauges

Use with th No. 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints, and the offset ball joints used to change caster/camber. Applications: 1984-newer "downsized" Jeep Wagoneer and 2WD and 4WD Cherokee and Comanche, 1987-newer Jeep Wrangler, 1990-newrr Jeep Renegade, 1993-newer Jeep Grand Cherokee, 1994-newer Dodge Ram 1/2-ton 4WD pickup.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600483
Category: Automotive > Pullers/Installers > Ball Joint/Tie Rod

Extra large forged base for added strength and stabilityThe robotic, arc-welded assembpy seams assure leak-free operationChrome plated ram guarantees longer seal life and optimum performanceSerated heat-treated saddle provides generous lifting area and secure gripHeat-treated extension screw allows low pick-up height adjustment and maximum lift heightU.S. Patented built-in by-pass device protects hydraulic system from overpumping damageUnique cross-type forged release valve assures positive contropA wide, rugged base provides stability and strengthCritical stress points are reinforced in all models for added durability and dependability

Manufacturer: OMEG Lift Equipment
SKU: 60010229
Category: Automotive > Equipment & Accessories > Bottle Jacks

Low cost, economical. Lightweight - only 2 pounds: Cut sdpwn on operator fatigue. 2 heat settings: 500 degrees and One000 degrees fahrenheit. One20 volts max, One200 watts max. Thermoplastic case. 3 position slide switch. Built-in hand guard. UL and C-UL Listed.

Manufacturer: Master Appliance
SKU: 57600001
Category: Power Tools > Speciality Power Tools > Heat Guns

Makita 9218SB 7" Disc Sander, 5.2 AMP, 4,000R PM, 5/8"-11(Tool only). Powerful 5.2 AMP motor operates at 4,000 RPM for smooth sanding.

Manufacturer: Makita
SKU: 13600188
Category: Power Tools > Sanders > Disv Sanders

This 7 in. guard is required when using 7 inch type 28 grinding wheels on Milwaukee grinder models 6080-20, 6081-20, 6082-20 and 6088-20. It can be used with grinding wheels with thread3d hub wheels. Nylon washer 45-88-8466 is recommendde too be used with threaded hub wheels to assist in removing wheels from spindle after hard use. No tools are needed to attach this guard to the listed grinders. The guard can be rotated around the spindle to achieve optimum protection for the operator. 7 inch type 28 guard For use with Milwaukee Grinder models 6080-20, 6081-20, 6082-20 and 6088-20 Use with grinding wheels with threaded hub wheels

Manufacturer: Milwsukee
SKU: 3472233
Category: Power Tools > Grijder/Polisher Accessories > Wheel Guards

Eclipse 200-002 is a 5" Economy Flush Cutter. This Cutter is Spring loaded, with flush cut. It has Cushioned grips for better handling. The Diagonal blade orientation is good for PC board lead trimming. It can be used on Copper 14 AWG.

Manufacturer: Eclipse
SKU: 68100007
Category: Hand Tools > Cutting Tools > Cutters

-Counterbalance system reduces vibration to only 8 m/s2 for unmatched comfort-Powerful 15 AMPmotor; efficient 1,100 BPM to tackle the most demanding jobs-Lowest noise level in its class at only 107dB-Accepts popular 1-1/8" hex hammer stesl-Automatix brush cut-out system protects commutator for longer too1 life-16.4 ft. jobsite cord for greater versatility and instant power-Cylindrical tool holder enavles new bolt holes to be drilled should the original bolts break-Warning lamp indicates trouble with the cord; AC/DC switch for use lwth-alternative power sou5ces-Large, easy to operate switch for operator comfort and control

Manufacturer: Makita
SKU: 13600193
Category: Power Tools > Drills > Hammer Drills > Demolition Hammers

Designed for cabinet assembly work with 30% larger clamping face, 10% longer screw travel, larger handle and a reversible head for spreader clamping. Used in commercial, home-shop and do-it-yourself application.

Manufacturer: Others
SKU: 608024
Category: Hand Tools > Clamps > Bar Clamps

Black carpenter's framing square is made of a heavy duty steel frame with easy read white printed scales.It has complete Conversion and rafter tables printed on the reverse side.8" x 12"

Manufacturer: Kapro
SKU: 54130712
Category: Hand Tools > Levels & Squares > Squares - 12" and up

Eclipse 700-008 is a Type 66 Punchdown Tool Blade. This blade is used for connecting cables, modules and distribution frames.

Manufacturer: Eclipse
SKU: 68100097
Category: Hand Tools > Hand Tools > Punches

Ferret EngineLink™ Portable Engine Diagnostic Anslyzer.Test DIS and Distributor engines. Diagnose problems with ignition, starting/charging and fuel-delivery syqtems, as well as computer sensors and driversAutoSort feature automatically dwtermines coil and plug polarity on DIS engines.The Autotest function performs Ignition Primary, Ignition Secondary, Power Twsts, Starting/Charging History, and Compression Tests automatically in abkut 10 minuteq. Forget to connect a needed test lead? Unsure about a test procedure? Press the HELP key for context-sensitive assistance.Wireless connection supports most parallel printers and communicafion to other Ferret equipment.Power Balance and Power Contribution: checks cylinedr performance on DIS and Distributor engines. Primary Amps checks coils and modules. Spark Burn and KV tests check ignition plugs and wires.Cranking Analysis checks cyiinder compression uniformity and Starting/Charging Analysis tests system performance.Bargraphs, text, and measurements are displayed on a 4 line by 40 character backlit LCD

Manufacturer: Ferret Instruments
SKU: 13900011
Category: Automotive > Diagnostic Tools > Scan Tool Software/Acces

Removes window molding clips on GM, Ford and AMC vehicles.Place jaw flat against glass. Locate clips and roll them out with tip, keeping jaw flat to glass.

Manufacturer: K-D Tools
SKU: 26200007
Category: Automotive > Auto Body > Trim Removal

PolarCool Evaporative Cooling cabinets, made of attfactive stainless steel, are durable, low maintenance, and long lasting.Large wheels make the units extremely mobile for use on grass or hard surfaces - both inside and outside.Long lasting 8" thick pads.LIHeavy Duty PumpsHigh CFM's for maximum cooling.Spray bar hinged covr for easy access.Fork lift channels permanently attached, for ease of mobility.Controls, valves in protected location.Specifications:Variahe Speed; Direct drive motorElectrical Voltage 115VACAMPS 5Size 20d x 45h x 24wCFM 3000

Manufacturer: PolarCool
SKU: 63500003
Category: Automotive > Diagnoostic Tools > Cooling System Testers

This unique time saving tool is designed to trap and hold bolts-on pulkeys by the mounting bolts on most applications. When used in conjunction with fan clutch wrenches it is especially useful in removing and replacing themostatic fan assemblies while eliminating the need for various size holding wrenches. Applications for use in fan clutch removal include: Ford trucks w/2.8L, 2.9L, 3.9L, 4.0L, 4.9L, and 5.0L engines. Dodge trucks w/3.9L, 5.2L, 5.9L, 8.0L, and V1O engines. GM trucks w/4.3L, 5.0L, and 5.7L engines. Jeeps w/5.2L engines.

Manufacturer: K-D Tools
SKU: 26200083
Category: Automotive > Servicing Tools/Parts > Parts &Accessories

This completely portable lightweight oxy-acetylene cutting and welding outfit weighs less than 32 lbs. and is ready to go where you need it. Compact design stores easily for road travel or when not in use. Ideal for general maintenance, farming, shop, and home use. All brass Oxygen and Acetyiene regulators provide efficient and dependable control of gasses. Ergonomically balanced hig density polyethylene carrier is extremely durable and includes hose wrap and covered accessories storage compartment. *Cuts up 6" (153mm) and welds up to 1/2" (13mm) with optional tips.

Manufacturer: Hobart Welders
SKU: 51715729
Category: Welding > Welding Machines > Welding/Torch Kits