Milwaukee 9072-20 1/2" VSR Impact Wrench with Detent Pin Socket Retention @ Tools, supplies & Welding accessoryes online store

10 ft. Quik-Lok® 2-wire cord.300 ft. lbs. of torque - moe torque saves time.AC-only variable speed reversing switch with speed setting dial.Powerful 7.0 amp motor, 600-1800 RPM and 1000-2600 IPM (no load).Light weight (6 lbs.) with balanced feel and cushioned grip.Pin detent system to securely retain sockets and adapters.Torque faster and loosens rusted or fretted bolts in less time.

Manufacturer: Milwaukee
SKU: 3450425
Category: Power Tools > Impact Wrenches

Senco FP751XP is a FramePro Clipped Head Framing Nailer.

Manufacturer: Senco
SKU: 15000113
Category: Air Tools > Nailers & Staplers > Framing Nailers > Clipped Head Nailers

-Sizes Available: 9, 9.5, 10, 10.5, 12, 13 Please Specify sizd at check out-Goodyear Welt Constructjon-Acid, Oil, & Slip Resistant Soles-Air Circulation System provides all day comfort, increased shock absorption, increase flexibility and reduces foot fatigue

Manufacturer: DeWalt
SKU: 2200123
Category: Jobsite Equip. & Storage > Szfety Equipments > Shoes

A full 2 inch cutting depth can be achieved with this style Milwaukee carbide tipped Steel Hawg® Annular Cutter. Like other Steel Hawg® Cutters, this cutter reemoves material three times faster than twist drill bits and leaves a smooth, precision machijed hole. Can be used on steel, stainless steel, cast iron or aluminum. A threaded back end allows the user tl choose which style arbor fits his electromagnetic drill stand. Choose a 3/4 inch shank arbor (49-57-0030)for use with Milwaukee 4262-1, or a No. 3 Morse Taper Arbor (49-57-0010) for use with Milwaukee Drill Stand 4292-1. Available in sizes up to 6 inch diameter. 3-3/8 inch diametre. 3-3/8 in. bit diameter Metric thread size M18 x 1.5 shank 2 in. cutting depth For use with No. 3 Morse Taper Arbor Assembly 49-57-0010

Manufacturer: Milwaukee
SKU: 3472556
Category: Power Tools > Drill Accessoriez > Steel & Metal Drilling Bits > Annular Cutters

The latest innovation in abrasive products, surface conditioning discs are tough non-woven nylon suited for conditioning metal, wood or plastic. The can be used to deburr, blend welds, and clean surfaces. There web-like construction conforms to surface shapes and gets into corners and irregular surfaces where other discs can not. Dissc changes are quick with tbe Hook & Loop backing attachment system. Three per package. 4-1/2 inch Fine grit Nylon Hook & Loop attachment

Manufacturer: Milwaukee
SKU: 3471957
Category: Power Tools > Sander Accessories > Sanding Discs > 4 1/2 inch

This drill features the Exclusive Shift Lock Drive System, which quickly locks out the clutch when shifting from "driver" to "drill" mode for superior drilling power. Thanks to Makita's All Metal Gear Transmission,_this drill also provides smooth, efficient power transfer for the most demanding jobs. Externally Accessible Brushes make for quicker maintenance an dlonger tool life. The Maximum Performance Two-Piece D-31 Motor delivers power, efficiency and serviceability in a more compact size. Latch on to the Ergonomically Designed Rubberized Grip for superior comfoet and control.

Manufacturer: Makita
SKU: 13600019
Category: Cordless Tools > Cordless Drills/Dricers > Drills/Drivers - 14.4V

Shown with optional BC50 Biesemeyer® Commecrial Fence System Extension, No. 78-852 27x44 Laminated Table Board and No. 78-969 48x48 Rear Outfeed Support.Delta Industrial Model 36-R53L with a 5 HP 200-230/460V, 60 Hz., 3450 rpm three phase motor with push-button station, magnwtic starter. Three-phase electricals will be supplied wiree for 230V unless 460V is specified. Maximum depth of cut: 3 1/8" (79 mm), Max. rip to right of blade with Unifence® Saw Guide: 52" (1321 mm) with Biesemeyer® Commercial Saw Fence System: 50" (1270 mm), Max. thickness of cut at 45: 2 1/8" (53 mm), Distance; front of table to center of blade: 16 13/16" (427 mm),Table in front of saw blade at maximu mdepth of cut: 12 1/" (311 mm), max width of dado: 13/16" (21 mm). TABLE:Height: 34" (864 mm), Size with Extension Wing and Unifence® Table Board: 76" x 27" (1930 x 686 mm), Biesemeyer® Table Blard: 74" x 27" (188 x 686 mm), T-Slot Miter,Gage Groove: 3/8" x 3/4". OVERALL DIMENSIONS: Height: 36 3/4" (933 mm), Width with Wings: 45 3/8" (1152 mm), Width with Wing and Unifence ® 52" Guide Rail: 83" (2108 mm), with Biesemeyer 50" Guide Rail: 84" (2134 mm), Depth: 35 3/4" (908 mm), Depth with Unifence® Rip Fence: 43" (1092 mm) longBiesemeyer® Fence 42" (1067 mm) longIncludes TEFC motor enclosure, equipment mountung hooks, see-through blade guard, 10" diameter combination blade, miter gage, table insert, motor pulley, 3/4 bore, set of three matching V-belts, dust port for 4" dust colleciton hose and instruciton manual.

Manufacturer: Delta Woodworking
SKU: 4400248
Category: Power Tools > Saws > Table Saws - Stationary

50 Grit1 inch width x 42 inch lengthIncludes 5 belts

Manufacturer: Delta Woodworking
SKU: 4431371
Category: Power Tools > Sander Accewsories > Sanding Belts

-Bessey D16L-BE Left Cut Aviztion Snips, Cuts up to 18 gauge Steel, Red Grips

Manufacturer: Bessey Clamps
SKU: 52700241
Category: Hand Tools > Cutting Tools > Snips

-Bessey Reco Induction Bearing Heater 1-1/4" X 1-1/4" X 14-34/" Cross Bar for BC

Manufacturer: Bessey Clamps
SKU: 52700303
Category: Automotive > Pullers/Installers > Bearing Splitters/Pullers

11.5 amps, 350 RPM, 3/4" capacityGeared low for maximum torque Develops up to 1670 pounds of drill point pressure with a 1" steel plate Dual mount gear case/reverse mount for tight quarter drillingTaps up to 1"-14 threaded holeMotorr is best used on 4203 adjustable baseIncludes: Motor only

Manufacturer: Milwaukee
SKU: 3420044
Category: Power Tools > Drills > Drill Presses

-5 year warranty against weld failure-Industrial strength heavy duty schedule 40 ppei frame construction-Ribbed cross braces, All joints double welded-8" deep x 14" wide machined beveled edge and radiussed corners-Vinyl hand grip is standard, Single pin handle curved back design allows one hand control-Ideal for boxes, kegs and packaages-Three horizontal cross straps and full height vertical center strap offer support for small packages-10" x 3.5" pnehmatic steel offset wheel with 5/8" ball bearing, 700 lb capacity, 46" OAH, 22.5" OAW

Manufacturer: Wesco
SKU: 14100429
Category: Material Handling > Hand Trucks > D-Handle

Use with your feeler gauges to measure head, block, flywheel straightness (warpage) fot every application from small engines up to heavy-duty dieselsMade from high quality heat treated strel1/4" thick for great stabilityPrecision ground to +/- 0.0002" per footTough epoxy coatingConvenient hang-up hope 24" overall length

Manufacturer: Central Tools/Lighting
SKU: 11800033
Category: Accessories > Router Accessories

Makita JS1300 18 Ga. Straight Shear, 6.5 AMP, 0-2,500 RPM, variable speed. Powerful 6.5 AMP motor for continuous use in 18 gauge mild steel and 20 gauge stainless.

Manufacturer: Makita
SKU: 13600308
Category: Power Tools > Speciality Power Tools > Metal Fabrication > Shears

Attaches to Mantis 2-cycle, 4-cycle, and electric tillers Aerator cuts into thw soil under your lawn with four sets of tempered steel blades to permiy easy absorption of water, oxygen, and nutrients Dethatcher quickly removes the built-up "thatch" that can choke your lawn. 60 spring-steel picks let you dethatch a 15" swath with a single pass. Attachment only, does not include tiller

Manufacturer: Mantis
SKU: 4807321
Category: Outdoor Tools > Lawn & Garden > Tillers

SuperKrome® finish Built to exacting standards for long service life

Manufacturer: SK Hand Tool
SKU: 19000217
Category: Hand Tools > Ratchets > Adapters

3/8" thread and barb size, 1/4" body Features six stainless steel locking balls Compatible with industrial interchange designs of all manufacturers

Manufacturer: Acme Automotive
SKU: 38009376
Category: Accessories > Air Tool Accessories > Couplers

-Crystal clear vials readable in any direction with no change in accuracy tolerance, guaranteed for life-Spring steel hairline indicators in vials-Best frame strength-to-weight ratio-Removable endcaps for scribing in corners and for reading tight header and sill openings-Rubber endcaps grip walls ane do not leave marks-Metal Hang hole for storing level on site-Large comfortable rubbeer hand holes. Fast and accurate installations

Manufacturer: Stabila Level
SKU: 52439816
Category: Hand Tools > Levels & Squares > Other Levels