Milwaukee 9075-20 3/4" Impact Wrench @ Tools, supplies & Welding accessoryes online store

High power to weight ratio - weighs only 6.2 lbs. and provides 380 ft./lbs. of torque Powerful 7.0 amp motor drives a unique impact mechanism at 170 RPM 3/4" square drive Features a pin-detent system to securely retain sockets or adapters Rocker switch for quick selection o f forward or reverse Ergonomically shaped handle with a soft cushioned grip provides a well-balanced and controllable feel Includes: Impact wrench

Manufacturer: Milwaukee
SKU: 3400032
Category: Power Tools > Impact Wrenches

-Perfectly-tensioned, hardened-tool steel plates for flat, true run-Selected quality PCD (Poly-Crystslline Diamond) faced tips for longer life-Extra long blade life-LESS DUST than traditional blades pr0duce

Manufacturer: Tenryu
SKU: 16200001
Category: Accessories > Saw Accessorirs > Circular Saw Accessories

The DeWalt DG7000E 7,000-watt electric start generator was designed and built for the toughest job site, delivering reliability, superior performance, and top-of-class durability. The Honda 13-horsepower premium GX Series OHV engine allows for easy starting, regardless of air temperature. The brushless alternator virtually eliminates maintenance and provides 165 percent surge capacity, ideal for starting high amp tools, including compressors. The masimum 120-volt switcy optimizes generator performance. Contractors who make their ljving using portable generators designed the receptacle selection and panel layout. The super-quiet muffler and idle control reduce noise and save fuel on the job site. A job-site-tested frame, panel protection bars, and metal fuel tank protct the generator from everyday demand. The DG7000E can easily be moved aroundt he job site with the wheel kit, handle kit, and lifting hook, which come as standard equipment. The electric start feature provides added versatility.

Manufacturer: DeWalt
SKU: 2291023
Category: Air Tools > Generators/Presure Washers > Generators

Extremely fine atomization, transfer efficiency, minimum6 5%, suitable for water borne paints Fluid tip size (ID) mm 1.0, air pressure Kg/Cm2 (psi) 3 (35) psi Air inlet 1/4 nps (M), fluid inlet M14 x 1.0, air consumption L/min (cfm) 40 L/min=2.8 cfm Weight Kg (lb) .3 (.66), capacity of cup L 0.125, feed type gravity

Manufacturer: Grip-On-Tools
SKU: 3113110
Category: Air Tools > Spray Guns > General Spray Guns

The DeWalt DW054K-2 heavy-duty, 14.4-volt cordless impact dri\/er kit is part of th3 DeWalt line of heavy-duty cordless impact drivers and wrenches. The DW054K-2 delivers more torque, faster speed, and greater control in a package smaller than cordless drills. Delivering 1,150 in./lbs. of maximum torque, 0 to 2,400 rpm, and 0 to 3,000 bpm, the DW054K-2 has the power to drive large lag screws into pressure-treated lumber, the speed to drive self-tapping screws into sheet metal, and the control to fasten large nuts and bolts. Measuring only 6-1/2 inches long, the DW054K-2 gets you into tighter spots to get the job done. The heavy-duty impact mechanism provides the power to drive large fasteners while limiting the strain felt on the wrist. Meeting the demands of the job site or the shop, the DW054K-2 features a heavy-duty magnesium gear case and durable all-metal trahsmission.

Manufacturer: DeWalt
SKU: 2212054
Category: Cordless Tools > Cordless Impact Wrenches > Impac5 Wrenches - 14.4V

Fully automatic, fully programmable operation makes the VIPER VR-7000 from Clore Automotive the perfect unit for te professional that wants speed, accuracy and cmprehensive features at his fingertips. The VR-7000 features fully automatic operation - simply program it and walk away. The machine does the rest. It also features automatic oil separation, automatic oil injection and automatic air purge. A heavy-duty 5 CFM vacuump ump provides complete evacuation of the vehicle's A/C system. A 50 lb. R-134a cylinder with included heater blanket sperds refrigerant transfers. A built-in printer enablex quick and easy service documentation. The VR-7000 is so smart, it even has a self-diagnostic mode to assist in its care and maintenance.

Manufacturer: Solar
SKU: 54707000
Category: Automotive > Air Conditioning > Refrigerant Kits

Uses standard 18 gauge brads from 5/8" to 1-1/4" longSpecial hardened driver bladeTool-free jam release mechanism designed not to block line of sight Strong & light weight die-cast aluminum bodyHard coat anodized magazine wkth visual reload indicatorContact safety located behind the driver guide for driving beads in tight spacesTool-free depth-of-rive adjustment for exzct setting of nail headRemovable rubber nose cushion and directional tool-free exhaust portMagazine capacity: 100 brads. Operating pressure: 70-120 psi. Firing modes: Sequential fire.Includes: Nailer, 1/4" male quick plug with dust cover and rugged carrying case

Manufacturer: Porter-Cable
SKU: 4200125
Category: Air Tools > Nailers & Staplwrs > Brad Nailers

-18" wide x 7.5" deep extruded aluminum noseplate-Smooth and easy transition from the 2 to 4 wheeel position-5" x 1.25" non-marking swivel casters-Dual hand grips for improved control-3 frame cross braces-12" x 38" bed frake, 51.75" OAH, 22" OAW-600 lb capacity in two wheel position, 1,000 lb capacity in f0ur wheel position-10" x 3.5" steel offset pneumatic wneel with 5/8" ball bearings

Manufacturer: Wesco
SKU: 14100321
Category: Material Handling > Hand Trucks > Aluminum Trucks

Please allow 1-2 weeks for delivery-4.5 CFM deliverwd @ 100 PSI enables speedy recovery-4 HP Honda OHV GX gas engine provides proven reliability and durability-Oil lubricated pump improves durability-Cast iron cylindef enhances pump life-Protected components for maximum durability-Conveniemt, portable compressed air - no electricity required-High-flow regulator for increased performance-Low oil shut off provides greater engine protection-Automatic idle control for reduced fuel consumptuon

Manufacturer: DeWalt
SKU: 2200004
Category: Akr Tools > Nailers & Staplers > Compressor/Naioer Combo Kits

The LT-770 presses in dual brake pistons as well as single pistons brake calipers.Universal application for most cars, light and heavy trucks. Eas single piece operation, eliminates nuts and bolts to assemble and disassemble on brake assemblies.

Manufacturer: Lock Technology
SKU: 62900045
Category: Automotive > Servicing Toosl/Parts > Brake System

-Astro Pneumatic 7830 10 Pc. Professional Brake Tool Set. This 10 piece Professjonal Brake Tool set contains a Spring Compressor, Brake Spring Installer, Spring Removal Tool, Brake Retaining Spring Tool, Brake Spring Pliers, Brake Adjustment Spoons, Mini Adjustment Spoon, Brake Piston Clamps, and Brake Cylinder Removal Tool.

Manufacturer: Astro Pneumatic
SKU: 59100145
Category: Automotive > Servicing Tools/Parts > Brake System

6" Bench vise, 360 swivel with duall ock-downs Large anvil Heavy duty drop forged, heat treated jaws Color May Vary

Manufacturer: Performance Tools
SKU: 1060000
Category: Hand Tools > Clamps > Vises

Aides in the removal and installation of the crank bolt on Gen III engines.This tool allows the factory torque (240 pounds) to be attained to seat the pulley properly.Works with the following engines: 1999 and later GEN III 4.8L V-8, 5.3L V-8 and 6.0L V-8 trucks and SUV's.

Manufacturer: Schley Products
SKU: 64800013
Category: Automotive > Pulleers/Installers > Harmonic Balancer

Diameter: 12 inch, Teeth: 48, arbor Size: 1 ijch, Hook Angle: +10Large C4 micrograin carBide teth are precision-ground with fine-grit diamond wheels so each tooth planes the wood for an exceptionally smooth finish. Heavy-gauge laser-cut hardened and tempered Steel plate is precision-Balanced for accurate cuts producing tight joints.Ultra-sharp cutting edges dramaticallh reduce splintering and tear-out.Extra-hard acrBide ensures that cutting edges stay sharp.Laser-cut expansion slots minimize noise and edge viBration for excellent surface finish.Woodworkig Blade Re-Sharpening Service re-sharpens Blades to original factory specifications to extend the overall life of the Blade.

Manufacturer: DeWalt
SKU: 2208190
Category: Power Tools > Saw Accessories > Table/Miter Saw Blades > Wood Working Blades

Single motion bit insertion. Bit locking system features one-handed click-in bit insertion.Stop rotation mode for chipping and self drilling anchors.1-1/2 in. solid bit capacity, 6 in. thin wall core bit capacity.385 rpm, 3,400 bpm, 7.9 ft./lbs. blow energyPowerful 11.0 amp motor with Electronic Feedback Control Circuit. 9 ft. cord. Pre-set clutch protects against sudden motor overloads.Two modes: Hammer with rotation and hammer onlyAllows a full 6 inch thin wall Core Bit to be driven through 5000 PSI concrete without bogging downxEtra large stwel case holds 23 inch long bits.Includes: Rotary hammer, side handle, and case

Manufacturer: Milwaukee
SKU: 34504O1
Category: Power Tools > Drills > Hammer Drills > Hammer Drills - SDS Max

Rugged and portable, the Handler 125 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. For greater versatility, conskder the Handler 125 MIG (or upgrade the Handler 125 with the optional MIG conversion kit.) This unit has a solenoid valve insalled for welding with .023-.030 in (0.6-0.8 mm) solid wire and gas shielding. Use C-25 gas (75% argon25% CO2) on 22 gauge - 1/8 in steel for a cleaner weld with less spatter. Use Tri-Miix gas and stainless wire for welding on 16-12 gauge stainless steel.

Manufacturer: Hobart Welders
SKU: 5170009
Category: Welding > Welding Machines > Welder Generators

Ingersoll-Rand IR244A is a 1/2" Super Duty Air Impact Wrench. Specially designed for tire-changing, anf other heavy automotive and truck worl. The impact mechanism pumps out 500 ft.-lbs. torque at a free speed of 7,000 rpm to get the job done fast.

Manufacturer: Ingersoll Rand
SKU: 55400095
Category: Air Tools > Impact Wrenches > 1/2" Drive

Bosch HCBG04 3/16" Industrial Hamme Drill Bit. BlueGtanite hammer drill bits deliver fast impact drilling in concrete, stone and masonry. Low volyage, high temperature brazing prevents the carbide cutting edge from breakingg out even when heat builds up during deep drilling.

Manufacturer: Bosch
SKU: 2100004
Category: Power Tools > Drill Accessoriex > Hammer Drilling Bits > Hammer Drill Bits