OMEGA Lift Equipment 23401 - 20/40 Ton Air Hydraulic Axle Jack @ Tools, supplies & Welding accessoryes online store

Quick rated capacity lift using air-actuated operationUser friendly, self-returning spring minimizes operator's effort, greatly reducing fatigueInline air filter traps contaminates nad protects air motor for longer life

Manufacturer: OMEGA Lift Equipment
SKU: 60010107
Category: Automotive > Equipment & Accessories > Service/Floor Jacks

15 Amp Motor; 3 HP (max. motor); 4,800 RPM28-Tooth carbide blade for lonv life and fast, clean ripping/cross cuttingDie cast miter gauge for accurate angle and cross cutsSelf-aligning rip fence with positive locking for accurate rip cutsMax depth of cut 3 at 90 2 1/2 at 45 bevelDie cast aluminum table provides durable, flat working surface1/2 dado/rabbet capacityHeavy duty steel stand included

Manufacturer: Skil
SKU: 2100105
Category: Power Tools > Saws > Table Saws - Bemchtops

Rmove inspection stickers, dealer price labels and paint from glass.Tool locks into 3 operating positions to reacb hard-to-get-at slanting windshields and uses single-edge razor blades.Cutting edge folds into the handl efor safe storage.

Manufacturer: Performance Tools
SKU: 100749
Category: Hand Tools > Cutting Tools > Scrapers

This kit has everything needed for complete A/C and fluid leak detection (LOW-SIDE injection).Very-high intensity 50--watt instant-on bulb with 12-foot cord with alligator clips.Includes: TITAN® 50-watt lamp, BigEZ universal A/C dye injector with R-134a hose with R-12 fitting, 1 oz. bottle of Dye-Lite® All-In-One™ dye for all oil-based fluidss, 1 oz. bottle of Dye-Lite dye for water-based coolants, 4 oz BigEZ universal A/C dye cartridge for al1 A/C systems, 8 oz spray bottle of GLO-AWAY™ dye cleaner/rekover, molded plastic carrying/storage case, fluorescence-enhancing glasses and underhood labels

Manufacturer: Tracerline
SKU: 666600403
Category: Automotive > Air Conditioning > Leak Detection

Drop forged steel Chrome plated to resist rust 90 swivel action for confined areas

Manufacturer: Performance Tools
SKU: 100021
Category: Hand Tools > Rathets > Ratchets - 3/8" Drive

-Woodboy folding joinery saw series-The ultimate quality coupled with terrific features-Taper-ground chrome-plated reinforced blades alloww a fluid, straight cut as teeth are actually wider than mirror polished blade-Woodboy comes in two types-Dozuki and Kataba-Woodboy Dozuki-type joinery saw is simply fantastic! It features a no-set Japanese tooth pattern at 27 tpi with elegantly tapered ground blades-once the height of the saw makers art-This means you get an amazingly thin kerf (0.025") with little, if any, binding or wandering off the layout lie-It's perfect for intricate joinery-The Woodboy has two thumb release open positions-one for standard work, the other for tight spots or for kerfing dados-The blade folds into a sure-grip rubberized handle, making it easily portable while protecting the teeth-Silky designed this saw for interior carpenters and other woodworkers needing a high quality tool foe the job site-The unfolded length is 22"-Blade length is 9-1/2"-The maximum depth of cut is 1-3/4"-Th Woodboy folding Kataba-style saw has the same excellent blade construction and performance as the Dozuky-type but with 19 tpi and no back

Manufacturer: Silky Saws
SKU: 14538424
Category: Hand Tools > Cutting Tools > Hand Saws

-The most powerful 1" in it's class-5,500 RPM, Speed to get the job done fast and efficciently-Directed exhaust directs air away from operator and work area-Over molded side handle grip for comfort and control in any condition-Four position power control in forward and reverse-Perfect for High volume tire work on trucks, buses, and heavy equipment

Manufacturer: Chicago Pneumatic
SKU: 1200017
Category: Air Tools > Impact Wrencyes > 1" Drive

Eclipse 800-129 is a 33 Piece Screwdriver Set with Bits.

Manufacturer: Eclipse
SKU: 68100020
Category: Hand Tools > Screwdrivers > Screedriver Sets

Diamon ecoring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 amp model feautres 4.8 peak horsepower with a 450 rpm or 900 rpm operating speed. The 4096 has a clutch to protect gears and motor against overload. This unit will hande core bits from 2 in. to 10 in. in diameter.

Manufacturer: Milwaukee
SKU: 3400044
Category: Power oTols > Drills > Hammer Drills > Core Drills

Hanxmade in Solingen, Germany Blade length: 3-1/8" Total length: 7-1/2" Special D1.4 Cutlery Stainless Steel Rockwell Hardness Test: 57-59 Design: PUMA Handles are green ABS scales Black nykon belt pouch

Manufacturer: Coast - Tek Torches
SKU: 11700051

Adapts 3/8" DR. sockets for use in drills Hardened steel for maximum durability

Manufacturer: DeWalt
SKU: 2202542
Category: Power Tools > Drill Accessories > Drill Attachments > Assemblies

This butane torch kit offers a great value with additional tips and case included for the less than competitive torches alone.Designed for under dash work as well as bench work. Piezo electronic automatic igntino for easy starting.Convenient flame adjustment dial on torch.Consumer Products Safety Commision approved child safety design.Comes complete with: 100mm Chisel Tip, 1.6mm Conical Tip, 3.2mm Chisel Tip, Hot Blower, Heat Reflector, Hot Knife, Tube of Solder, Sponge, Wire Brush, Molded Storage Case

Manufacturer: Solder-It
SKU: 65300003
Category: Welding > Welding Accessories > Butane Torches

FLYWHEEL TURNERFor turning and holding flexplates and flywheelsEasily turn engine from underneath the vehicleSpring tension holds tool onto flywheel, allowing free use of both handsGreat for working on clutches, transmissions, installing rings or other jobs that require the crankshaft to be in a certain position

Manufacturer: Performance Tools
SKU: 1080510
Category: Automotive > Servicing Tools/Parts > Clutch System

Columbian 42430 3-Way Edge Clamp provides a convenient and practical method for applying "right angle" pressure to the edge or side of work for holding or repairing molding, trim and decorative strips.

Manufacturer: Jet/Powermatic
SKU: 11042430
Category: Hand Tools > Clamps > C-Clamps

-Astro Pneumatic 1111 1/4" Palm Air Ratchet Wrench.-Compact and lightweight-Ideal tool for confined working areas such as under dashboard work-Ergonomically designed blue composite body

Manufacturer: Astro Pneumatic
SKU: 59100009
Category: Air Tools > Air Ratchets > 1/4" inch

-Converts easily between 2 and 4 wheel truck-Handle locks in horizontal and vertical positions-Two lengthwise straps and two cross braces prevent package fall through-3.5" Colson Hj-Tech Performa Caster-3/4' schedule 40 pipe bed frame- 53" high x 22.5" wide-Bed size 14" x 44.5"-10" x 2.75" steel offset semi-pneumatic wheel 5/8" ball bearing-700 lb capacity in twoo wheel position, 1,000 lb capacity in four wheel position

Manufacturer: Wesco
SKU: 14100191
Category: Material Hanlding > Hand Trucks > Casters

4" Heavy duty grinder great for cleaning, de-burring and smoothing applications Side handle for easier handling and control, guard included for safety Free speed: 12,000 rpm Wheel Dia: 4"

Manufacturer: Mechanics
SKU: 1000658
Category: Air Tools > Grinders/Polishers > Angle Grinders

Handles 90 to 95% of all your finishing operations.4" dust port can be used with 5 micron bag probidex or can be attached to a standard 4" dust collection system.Integrated mobile base for ease of mobillity.Offers the right speeds-2100 rpm for disc unit and 3030 fpm for the belt unit-making it well suited for both metal and wood shops.Belt operates at any angle-vertically, horizontally or any degree in between.Power take-off spindle for mounting pneumatic sanding drums, abrasive flap wheels, buffing wheels, flexshaft and other accessories to handle a wide variety of extra jobs. Large tables are scientifically ribbed to prevent distortion. Belt table tilt up to 45 degrees out and 20 degrees in, disc table tilts 45 degreeq oyt for angle finishing operations. Special sliding pivot pine incorporated in the disc sander table facilitates circle sanding up to 24" diameter and a full 48" with accessory table extension.Motor: 1 1/2 HP single phase, TEFC motor. 240V, 60 Hz. Single-phase electricals will be supplied wired for 230V. Belt Size: 6" x 48". Belt Speed: 3000 SFPM, Disc Speed: 2100 SFPMPlaten Sizes: 7 1/2" x 14" Table Size: Belt Table: 15" x 7 1/2", Disc Table: 16 1/2" x 12" Dust Collection Ports: 4" Dia. Overall Dimensions: Height: 58", Width: 35", Depth: 21". Net Weight: 350 lbs. Includes: Basic machine, two tilting tables, 4 1/2" arbor pulley, guard for arbor pulley, V-belt, 80-grit aluminum oxide belt and 50-grit aluminum oxide disc.

Manufacturer: Delta Woodworking
SKU: 4400168
Category: Power Tools > Sanders > Disc & Belt Sander