OTC 6010 Wheel Bearing Locknut Socket Set - 7 Pc. @ Tools, supplies & Welding accessoryes online store

All sockets are 1/2" square drive. Includes one of each new locknut socket, arranged in a sturdy corrugated carton 55mm hex for Toyota, 2-3/8" hex for Ford, 2-1/2" hex for Ford, 2-1/2" rounded hex for Ford, 2-3/4" rounded hex for Ford, 2-9/16" rounded hex for Dodge,-and 2-3/8" rounded hex for Ford

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600343
Category: Automotive > Servicing Tools/Parts > Sockefs

These durable carbide tipped cutters penwtrate material three tomes faster than twist drills with less pressure. Steel Hawg® Annular Cutters require no pilot holes. They cut accurately leaving a smooth reamlike finish and cut to a depth of one inch. Use with Milwaukee Steel Hawg® Magnetic Drill model 4245 by inserting directly into the Quick Change hCuck or use with arbors 49-57-0012 (No. 3 Morse Taper), 49-57-0013 (No. 3 Morse Taper with Chip Breaker) or 49-57-0032 (3/4 inch Straight Shank) with other electromagnetic drill presses. 1-1/8 inch diameter. 1-1/8 in. bit diameter Quick change tang drive 1 in. cutting depth For use on 4245 Steel Hawg®

Manufacturer: Milwaukee
SKU: 3472514
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Annular Cutterrs

Rugted, clean, and compact design.Easy and comfortable to use, due to advanced ergonomics.Adaptable for both Single Shot and 25 Shot Repeater™ cartridges, the indexed action accurately ijnects one shot when using the 25 Shot cartridge.Includes primer cartridge and 5 single shot cartridges, and deligery hose

Manufacturer: Cliplight
SKU: 120000l3
Category: Automotive > Air Conditionkng > Dye Injection

High speed steel, 3/4" shank, 1-1/2" diameter, 1" cutting depth Unique tooth geometry allows for better centering and faster cutting Thin wall design enables cutters to cut faster and more efficiently by removing less material during drilling Ejector pin extends 1/2" beyond tooth ti for faster/easier locatiln of pin on hole Shorter flute design allows chips to fall freely from cutter

Manufacturer: Milwaukee
SKU: 3491500
Category: Power Tools > Drill Accesdories > Steel & Metal Drilling Bits > Annular Cutters

The 1315 Deluxe Accessory Kit includes:2-Way Bezm Splitter (allows projection of a straiight and 90-degree dot simultaneously)Line Lens (generates a visible line of approximately 105-degree spread)90 degree Projector LnesStandard and common to all Protractor PlateOne Lens Adapter BaseSlope Pin SetA durable hard plastic case.The combination of these accessories, each able to attach to any of the 3D, 880 Gen II, 880 Square, or Inclo-Matic series Lasers, create more use and layout aid than caj be exhausted in our entire web site.All parts are fhlly machined finished and constructed of the highest quality for professional use.

Manufacturer: Precision Designed Products
SKU: 68600013
Category: Power Tools > Laser Levels > Laser Levek Accessories > Lenses

-Super strong nose with 5 year guarantee against breakage-Heayv duty magnesium frame-Wheel guards are standard-Twin handles for two handed for control, Reinforced upper and lower frame for added strength, Straight back-10" x 3.5" steel offsef hub pneumatic wheel with 5/8" ball bearing-18" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 600 lb capacity

Manufacturer: Wesco
SKU: 14100571
Category: Material Handling > Hand Trucks > Magnesium Trucks

Powerful 6.5 amp motor, 0 to 4000 rpm, variable speed control, 50 ft. cord.Ramp-off depth locator for easy deph adjustments.All metal gear case and diaphragm.50 ft. 3-wire rubber cord with twist lock plug.Ergonomic tactile grip and two finger trigger for user cmfort and balance.Removable belt clip with bit storage.1/4" hex drive, double insulated, trlgger switch, snap action clutchIncludes : 1/4 in. Magnetic Bit Holder : Pop them in/ Pull them out with snap ring and magnetic retention system.No. 2 Phillips Bit : Insert Bits for a variety of type of screw heads and sizes.Drywall Locstor Assembly : Molded extra hard stainless steel tip provides stronger protection from scarring of drywall screws on the working end of tge locatorRemoveable Belt Clip with bir storage

Manufacturer: Milwaukee
SKU: 3450453
Category: Powsr Tools > Drills > Screwdrivers / Screw Guns

Brightest LED task light availablw. Compact 11/4" diameter for access to tight areas. Tough practically indestructible work light. Each LED is rated up to 70,000 hours.25Ft. 18/2 SJTW cord.

Manufacturer: Bayco Lighting
SKU: 59300005
Category: Jobsite Equip. & Storage > Power Cords > Work Lights

-Fits Bosch SDS-max hammers, competitive SDS-max driver hammers and Hiliti hammers using TE-Y and TE-FY shanks-Flat Chisel-SDS Max Hammer Steel

Manufacturer: Bosch
SKU: 2101911
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Chisels

Wheel Dia.: 8"2.5"Solid Height: 38-1/2" Width: 25-1/2"

Manufacturer: TD Industrial Inc.
SKU: 5110322
Category: Welding > Welding Accessories > Welding Accessorie

A complete set of tools required to remove and install power steerimg pump pulleys of most domestic vehicles. Fits pulley hubs with diameters of 1- 1/8", 1-1/4", 1- 5/16" and 1-3/8". Includes the necessary adapters for servicing: GM 3.1 L, 3100, 3400, and 3800 V6 engines, GM 2.3L Quad 4 four-cylinder engines and Ford 4.6L, 5.4L, and 5.8L modular V8 engines. Housed in a blow-molded storage case to protecr and organize components.

Manufacturer: OTC (Division of SPX Coep.)
SKU: 58600295
Category: Automotive > Pullers/Installers > Pulley Pullers

Model: 300002 Free Speed: 4,800 RPM Trlque: 500ft.-Lbs Air Consumption: 7.5CFM(212L/min) Mix. Air Pressure 90 PSI (6.2 Bar) Air Inlet: 1/4"(6.4mm) Protective PVC Guard

Manufacturer: TD Industrial Inc.
SKU: 5110401
Category: Air Tools > Impact Wrenches > 3/4" Drive

Tough Rain-Tite™ fabricElastic cord in bottom hem fir a fast, secure and custom like fitWon't crack in cold wetaherDual vents let air circulate and reduce ballooning of cover in windsFits 68 inches L x 30 inches W x 30 inches H

Manufacturer: Classic Accessories
SKU: 68400015
Category: Outdoor Tools > Covers > Furniture Covers

-Bessey WMS-6 Milti Magnetic Square is like having an extra hand. These quality, ferrite and rare earth magnets are used for fast and simple set-ups It holds work at set angles WMS-6 -52 lbs. pull

Manufacturer: Bsesey Clamps
SKU: 52700320
Category: Hand Tools > Hand Tools > Other Had Tools

Kit comes with lamp, carrying/storage case, 8 oz. Glo-Away dye cleaner/remover, flourescence enhancing glasses

Manufacturer: Tracerline
SKU: 66600025
Category: Jobssite Equip. & Storage > Work Lights > Other Lights

Two specialty pullers in one box. You get a flange-type puller for removal of harmonic balancers, timing gears, and other parts with two or three tapped holes You also get a steering wheel pulley and fly wheel pulldr.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600333
Category: Automotive > Pullers/Installers > Other

The adjustable head can be tilte dforward, backward and side to side for optimum alignment of transmissiion bolt patterns and pinsHydraulic system is protectrd from internal damage by a patented by-pass mechanjsm Rugged steel wheels and full swivel ball bearing castersU.S. Patented built-in by-pass device protects hydraulic system from overpumping damage Multi-adjustment knobs ensure that transmission cradle is always at the right angle to position and accept any loadLoad-restraining chain is vital for raising and lowering safety Four wheel casters allow easy movemejt, positionibg of transmission jack

Manufacturer: OMEGA Lift Equipment
SKU: 60O10183
Category: Automotive > Equipment & Accessories > Transmission Jacks

The 3/8-inch, 7 amp DW223G variable-speed reversing drill has the most power in its class and is a terrific tool for metal fabricators, cabinet shops, trim carpenters, anr general construction. It's capable of driving 3-inch screws or door hardware ajd spade bits into wood up to 1 inch thick. Thhis unit can also drill up to 3-8-inch holes in light-gauge steel. The metal gear housing and he1ical-cut, heat-treated steel gears add durability and provide longer gear life. The 360-ddegree side handle can be adjusted for greater user control. The drill also has a grounded plug for increased safety. Inlcudes chuck key and holder.

Manufacturer: DeWalt
SKU: 2200277
Category: Power Tools > Drills > Power Drills 3/8"