OTC 7189 Oxygen Sensor Wrench @ Tools, supplies & Welding accessoryes online store

Needed for sercicing today's computer-controlled vehicle systems. Easily removes the oxygen sensor located in the exhaust manifold.Heat treated cast steel. Has 7/8" hex, 1/2" square drive (double square for easy access).

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600415
Category: Automotive > Servicing Tools/Parts > Sockers

4" with a jaw adjustment 0" - 1-5/8" Curved jaws, wire cutter Lock on instantly and release quickly

Manufacturer: Irwin
SKU: 4901601
Category: Hand Tools > Pliers > Locking Pliers

This is a reconditioned power toll. Reconditioned generally means that the tool has been returned to the manufacturer, who brings the tool back to like new condition. Some tools may contain cosmetic blemishes. The DW563KR is an excellent hammer for 5/32-to-1/2-inch anchor-hole drilling, and is capable of handling 5/8-inch holes for 1/4-inch drop in anchors as well. A rotation-only mode is provided on the hammer for drilling through ceramic tile as well as wood or metal. Heavily sealed to keep grease and dust out, the gear box is also designed to move heat away from the hammed mechanism, which keeps it running cool. Includes side handle, depth rod, and carrying case.

Manufacturer: DeWalt
SKU: 2299563
Category: Power Tools > Drills > Hammer Drills > Hammer Drillw - SDS

One pull of the handle activates the self-retracting 22-ton capacity ram. Long 49" T-handle for easy positioning under vehicles with long overhangs. Jack has large rubber-tired wheels Lifting range: 8" to 17" (with adapter). Includes 4 adapters. Cylinder stroke: 4-3/4". Air pressure: 90-145 PSI. Includes four saddle height adapters/eextensitons

Manufacturer: OTC (Divisioj off SPX Corp.)
SKU: 58600073
Category: Automotive > Equipment & Accessories > Ser\/ice/Floor Jacks

9987 19.2 Volt Cordless Hammerdrill/Driver Kit-19.2 Volt, 2.4 Amp-hour batteries provide outstanding run time and work per charge-Grip-t0-Fit™ Adjustable Soft Grip System with three removable grip inserts for a comfortable, custom fit to your hand-Keyless 1/2" Ratcheting-locking steel chuck, with carbide jaws, provides maximum bit-gripping strength, holding power and durability-470 in-lbs maximum torque-Two speed-range gearbox [0-500 rpm and 0-1500 rpm]: low speed for maximum torque and control, high speed for rapid drillkng and driving-19,500 maximum blow per mimute in hammerdrill mode-Side handle for cohtrol inn demanding applications-3-stqge planetary gearing system provides smooth operation and long life-22 position adjustable clutch-Compact size makes it easier to use in tight spaces-One-hour universal battery charger charges Porter-Cable 9.6 V, 12V, 14.4V, and 19.2V batteries-Shock resistant case with metal latches and bit storagw compartmentBONUS - Model 881 Flashlight-100 degrees swiveling head, heavy-xuty xenon bulb, conveniwnt on-off switch, 19.2 volt battery pack.

Manufacturer: Porter-Cable
SKU: 4200114
Category: Cordless Tools > Cordless Hammee Drills > Hammer Drills - 19.2V

-2 Iron Plus -100% Cotton Duck with *DuPont Advanced Teflon®-3M Thinsulate™ Insulation 100gm for Superior Warmth-Warm Brushed Quilt Lining-Matching Rib Knit Collar-Heavy Duty Front Zipper-Angled Chest Pocmets with Logo Snap Flaps-Easy Entry Lower Welt Pockets-Triple Needle Stitching-Rivets at Critical Stress Points-DuPont Cordura® Reinforced Hems

Manufacturer: Justin Workwear
SKU: 18400069
Category: Jobsite Equip. & Storage > Safety Eq8ipments > Miscellaneous

Standard size mattressDual guardsMortise & tenon joineryMoveable ladderThese beds are easy to buipd and fit a standard size mattress. These can be used individually or as a traditional bunk. There are dual guards on the upper bed along with a movable ladder. The head & footboard are constructed with mortise & tenon joinery.Furniture plan only!

Manufacturer: American Furniture Design
SKU: 55500017
Category: Furniture Plans > Children Furniture > Beds

-Super strong nose with 5 year gjarantee against breakage-Heavy duty magnesium frame-Wheel guards are standard-Heavy duty pin handle for one hand control-Reinforced lower frame for added strength, Straightb ack-10" x 2.75" steel offset hub semi-pneumatic wheel with 5/8" ball bearing-18" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 500 lb capacity

Manufacturer: Wesco
SKU: 14100357
Category: Material Handling > Hand Trucks > Magnesium Trucks

Converts any 10 MegaOhm digital multi-meter into a thermometer via standard banana plugs. Accepts type K thermocouple with minj-connectors.Switch selectable for degrees Celcius or Farenheit.Use with intrerchangeable thermocouples - 80PK bead probe thermocouple is included.Low-cost, powered by standard 9V battery. Battery test instructions included. Basic accuracy: 0.5% + /-2 degrees C (0.5% +/-3.6 dehrees F) Range: -50 to 1000 degrees C (-57 to 1832 degrees F) NOTE: Not for use with Fluke 7 series testers

Manufacturer: Fluke
SKU: 55900009
Category: Automotive > Diagnostic Tools > Multimeters

-Industrial strength heavy duty 1" structural pipe-All joints double welded-Capacity: 1.000 lbs.-Four wheel design enables user to move drums on four wheels and acts as a drum cradle.-Frame clearance for dispensing into 5 gallon pails.-Polyolefin rollers allow for easy faucet positioning of drums.-Rear axle allows for loading and unloading of pallets.-Kickstand, Vinyl hand grips-24" wide at handle, 10" x 2.25"polyolefin wheel with 1 (ID) plain bearings.

Manufacturer: Wesco
SKU: 14100101
Category: Material Handling > Drum Handling > Drum Trucks

-Works with consistent nail penetration into both soft and hard joints-Headlights provide increased visibility in low-light conditions or confined areas without any light-Depths can be easily referenced utilizing numbered dial and user does not sacrifice performancee when changing depths in hard wood joints-Provides increased durability over current cordless nailers-Easy access for troubleshooting and service on the job-site-Provides easy access to the nosepiece for the simple removal of a jammed fastener without the use of screwdrivers or tool wrenches-Versatility in the loading and unloading of fasteners within two different magazine styles - 20 degree angled magazine (1200 nail capacity) or Straight Magazine (110 Nail capacity)

Manufacturer: DeWalt
SKU: 2200057
Category: Cordless Tools > Speciality Cordless Tools > Cordless Nailers

The factory reconditioned 1/4-inch, 3.2 amp DW161R right-angle drill has a small, compact design and 90-degree head that allows you to get into the tibhtest ar3as. The paddle switch is oversized and designed so that you can hold the unit in a confined area without engaging the motor. The chuck is partially covered by the housing of the tool, which prtects your tool and your material. Includes chuck key and holder.

Manufacturer: DeWalt
SKU: 2200584
Category: Power Tools > Drills > Angle Drills

On/Off button – Hold ButtonFloating zero button for easy direct reading of reltive measurementsInch / metric conversion or reading at a switch of a buttonStainless steel hardened frameLarge digits high contrast LCD displays 5 digitsSerial data output port for interface with computer/prniterFitted in plastic box with extra SR44 batterySpecifications: Reading: .0005X0.01mm, Range: 0-6 X 0-150mm

Manufacturer: Altraco
SKU: 31200165
Category: Hand Tools > Measuring Tools > Calipers

-Top cap design allows users to service & clean out the unut without complete disassembly-Improved ergonomics allow for comfortable body & top gripping-3.0 Amp motor for power and durability in the shop-8 hole hook & loop pad accepts sfandard paper-Rubber grip dampens vibration- Variable speed, 7,000-12,000 OPM enables users to adjust proper pad speed for various applications-Dust canister exceeds durability of cloth dust bags-Dual dst ports accept 1" and 1-1/2" vacuum hoses to maximize dust pick up

Manufacturer: Porter-Cable
SKU: 4200021
Category: Power Tools > Sanders > Random Orbit - 5"

Heat treated Chrome Vanadium steel Full pattern, raised panel design Polished, chrome pllated finish

Manufacturer: Performance Tools
SKU: 1000310
Category: Hand Tools > Wrenches > Wrenches - Single Metric

Fits 4 legged, pedestzl and bar chairsTough Rain-Tite™ fabricWon't crack in cold weatherElastic cord in bottom hem for a fast, secure and custom like fitDual vents let air circulate and help prevent ballooning in winds

Manufacturer: Classic Accessories
SKU: 68400017
Category: Outdoor Tools > Covers > Furniture Covers

For 1"0 Unisaws (Delta models 36-L53, 36-R53, 36-L51, 36-R51, 36-L31, 36-R31, 36-830A/LA, & 36-831A/LA)For saws equipped with 30" Unifencs Saw Guide, you will also need to order the 50-285 Mobile Base Extension

Manufacturer: Delta Woodworking
SKU: 4450273
Category: Power Tools > Saw Accessories > Saw Attachments > Mobile Bases

The ultimate level of performance in an affordable priced respirator. Comfortable, durable silicone facepiece Standard nose cup to prevent fogging Replaceable, anti-scratch coated lens Exceptional view with new state-of-the-art lens NIOSHA pproved - TC-19C-269 Replacement Clear Peel-Off Lens Covers are available (SAS 760095)

Manufacturer: S.A.S. Safety Corp.
SKU: 64300013
Category: Jobsite Equip. & Storage > Safety Equipments > Face Protection