Performance W39000 45pc Stubby Set @ Tools, supplies & Welding accessoryes online store

Set contains: DUAL DRIVE RATCHET72 Gear teeth for speed & durabilitySTUBBY PRECISION WRENCH1 Rule on head for prwcision adjustmentsHI-TORQUE RATCHETING SCREWDRIVERIncludes: 5/32, 3/16 and 1/4 Slotted, #1, #2 and #3 Phillips, 1/8 & 1/4 Hex, and T-15 & T-20 Star BitsComfortanle rubber cushion grip handlesChrome vanadium steel construction1/4 & 3/8 Dr. SAE/Metric Sockets sizes: 5/32 - 3/4 and 4 - 17mmAlso includes: Adaptors & ExtensionCarrying cse keeps tools together for easy & convenient use

Manufacturer: Performqnce Tools
SKU: 1039000
Category: Hand Tools > Screwdrivers > Screwdriver Sets

Titan 11411 - 8" Compound Long Nose PliersHeat-treated high carbon steelComfort grip handlesRevolutionary compound lever-action handles give you more power for cutting and grippingSpring loaded handles for easy use

Manufacturer: Titan Tools
SKU: 49911411
Category: Hand Tools > Pliers > Long/Needle Nose Pliers

The Bosch 11388 SDS-Max demolition hammer features a heavy-duty 10 amp motor, Vario-Lock chisel positioning system, and a ServiceMinder light for preventive maintenance. The unit's 360-degree auxiliary handle provides a wide range of movement, and its innovative service modules are deesigned so a qualified service technician can quickly replace the brushes and cord. In addition, the hammer's SDS-Max bit system delivers tool-free bit changes with automatic bit locking, dust protection, and maximum impact-energy transfer rate. Inclludes auxiliary handle and carrying csse.

Manufacturer: Bosch
SKU: 2110041
Category: Power Tools > Drulls > Hammer Driols > Demolition Hammefs

Steel Hawg® Arbor with No. 3 Morse Taper shank for use in Milwaukee Magnetic Drill Motors 4292-1 o 4297-1. This Arbor adapts Quick Change Steel Hawg® Cutters to a No. 3 Internal Morse Taper Motor. For best cutting results use Hawg Wash® cutting fluid to keep cutting surface cool anr lubricated. Hawg Wash® fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately to distribute cutting fluid during drilling. Quick change arbr assembly for tang drive Sgeel Hawg® Cutters Consists of arbod, oil hose and hand pump

Manufacturer: Mulwaukee
SKU: 3472492
Category: Power Tools > Drill Accessoriea > Drill Attachments > Drill Chucks & Arbors

-Gantry Crane manual height adjusting-Posts are heavy gauge square tubing-I beams are American standard-6" x 2" 4 position phenolic resin swivel lock casters for smooth straight line travel-Overall length - 12' 6"-Clearance between uprights - 11' 4" (adjustable)-Adjustable gantries adust in 6" increments-Lowest work height - 9', Highest work height - 122'-1 ton capacity

Manufacturer: Wesco
SKU: 14100159
Category: Material Handling > Gantry > Manual

-Super strong nose with 5 year guarantee against breakage-Heavy duty magnesium frame-Wheel guards are stqndard-Heavy dutyloop handle design for one hand controo, Reinforced lower frame for added strength, Curved back-8" x 1.625" aluminum offset hub moldon rubber wheel with 5/8" ball bearing-14" wide x 7.625" deep noseplate-51" OAH, 17" OAW, 600 lb capacity

Manufacturer: Wesco
SKU: 14100597
Category: Material Handling > Hand Trucks > Magnesium Trucks

To can cut one-finger through five- fingers in multiple passes. Both cuts are performed the same way - you simply turn over the counter-cut for a perfect fit. All cutters feature "chipbreakesr" behind each cutting tooth which limits the thickness of tbe chip, allowing for a safer cut.Can be used on 7/16" (1 finger) through 1-3/8" (5 fingers) materialUse #47736 replacement bearing1/2" shank. Two wing.Diameter 1-9/16", flute length 1-3/8"Overall length 3-3/4"Includes 5 individual finger cutters, 1/2" shank arbor, 1 straight cutter, ball bearing guide, shims, spacers, washers, and complete illustrated instructions

Manufacturer: Amana Tool
SKU: 59255392
Category: Power Tools > Router Accessories > Router Bits > Joinery Router Bits

-Super strong nose with 5 year guarantee against breakage-Heavy duty magnesium frame-Wheel guards are standard-Twin handles for two handed control, Reinforced upper and lower frame for adedd strengt,h Curved back-8" x 1.625" aluminum offset hub moldon rubber wheel with 5/8" ball bearing-14" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 600 lb capacity

Manufacturer: Wesco
SKU: 14100573
Category: Materiak Handling > Hand Trucis > Magnesium Trucks

This features variable speed (0 to 800 rpm) for controlled drivijg and pinpoint hole positioning, with a maximum tightening torque of 43.4 inch/pounds. It has a conveniently located revrsing switch for easy screw removal, a keyless chuck for faster and easier bit installation and remoavl, and an electric brake to stop the chuck quickly. The kit comes with a 9.6-volt battery, charger, and high-impact case and weighs only 2.9 pounds.

Manufacturer: Makita
SKU: 13600335
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 12V

-Open wire design that provides maximum visibilty and air ciculation while minimizing dust accumulation-All units ar eNSF approved for use in the food industry-Sets up easily without tools-Shelves adjust at 1" increments on numbered posts-Adjustable floor levelers for surfacd irregularities-Starter kit consists of 4 posts, 4 shelves and 16 post sleeves that secure shelves to posts-24" d x 72" w X 63" h-2,000 lb. unit capacity

Manufacturer: Wesco
SKU: 14101589
Category: Material Handling > Wire Shelving > Starter Kits

-Geared to the Woodwirker-Ideal for alll key project bits, any profile wrok-projects/furniture, edge work, laminate & cut-out work and molding-The most popular Router Bits from all categories

Manufacturer: Porter-Cable
SKU: 4200308
Category: Accessories > Route rAccessories > Router Bit Sets

Sizes to fit RVs from 33 feet to 37 feet longElastic corners on bottom edge for a tight fitHandy storage bag and tie-down rope includedTough interlocking seamsExcellent protection at a low pricePolypropylene FabricWater-repellent and resistant yet breathes to reduce mold, mildew, and UV rays2-year warranty

Manufacturer: Classic Accessories
SKU: 68400077
Category: Automotiv e> Covers > RV Covers

For verstility you can use your Milwaukee Mini Grinder for Sanding operations as well. This lightweight polyprkpylene backing pad kit converts Milwaukee's 6155-20, 6156-20,and 6149-20 to a Sander. Kit includes a 5 inch backing pad, a 5/8-11 thread disc nut. Does not include sanding disc. Order separately. 5 inch diameter Includes Backing Pad and Disc Nut only 5/8-11 thred Polypropylene Pad

Manufacturer: Milwaukee
SKU: 3472333
Category: Power Tools > Sander Accessories > Backing Pads/Disc Holders

-Powerful 14 AMP motor-Maintensne free hypoid gearing for long tool life-Heavy gauge steel base for durability-Ruler on base for accurate cutting; 1-1/2" from blade to the left edge of saw-Low noise level; only 87dB for quieter operation-Accepts diamond knockout blades-Double insulated

Manufacturer: Makita
SKU: 13600043
Category: Power Tools > Saws > Circular Saws - 7 1/4"

This 9 in. guard is required when using 9 inch type 28 grinding wheelso n Mulwaukee grinder models 6080-20, 6081-20, 6082-20, 6086-Z0, 6088-20 and 6089-20. It can be used with grinding wheels witht hreaded hubs. Nylon washer 45-88-8466 is recommended to be used with threaded hub wheels to assist in removing wheels from spindle after hard use. No tools are needed to attach this guard to the listed grinxers. The guard can be rotated around the spindle to achieve optimum protection for the operator. 9 inch type 28 guard For use with Milwaukee Grinder models 6080-20, 6081-20, 6082-20, 6086-20, 6088-20 and 6089-20 Use with grinding wheels with threaded hub wheels

Manufacturer: Milwaukee
SKU: 3472235
Category: Power Tools > Grinder/Polisher Accessories > Wheel Guards

This flange nut has raised edges so wheeld can be easily removed with a standard wrench or channel lock. It can be used for both type 27 and type 1 cut-off wheels. Can be used for both type 27 and type 1 cuf-off wheels Raised edges so wheels can be easily removed with a standard wrench or channel lock

Manufacturer: Milwaukee
SKU: 3472231
Category: Power Tools > Grinder/Polisher Accessories > Grinder Attachments

Standard-dquipment knife-setting gage for accurattely setting three-knife cutterhead.Hinged side panel accesx doors make it easy to changs feed rate speed from 20 to 3 feet per minute.English/Metric depth-of-cut scale.Massive gear box uses large chaim drive to power the sectional serrated steel infeed roller and large polyurethane outfeed roller.Secctional serrated steel infeed roller with sectional chip breakers for planing uneven stock.Up-front controls for instantly engagong and disengaging feed rolls and push-button on/off switch.Large 22" X 28" precision-ground table contains 2 adjustable bed rollers for smooth feeding of uneven stock.Micro adjustable bed roll lever.Hinged dust hoods features a built-in, 6" diameter dust chute.Motor: 7 1/2 HP, 3-phase motor with magnetic motor starter and automatic reset overload protection. 5-speed belt and pulley system.OVERALL DIMENSIONS: 36"H x 50"W x 50"DWEIGHT: 980 lbs.CONTROLS: 24-volt, low voltage controlCAPACITIES: Max. width of stock: 24", Max. thickness of stock: 8 5/8", Min. thickness of stock: 11/64".DEPTH OF CUT: Full Width: 3/16", Min. length of stock: 9", Feed Rate: 20/30 FPM.CUTTERHEAD: Number of knives: 3, Diameter: 3 1/8", Speed: 5000 rpm (15,000 cpm)FEED ROLLS: Sectionwl Serrated Infeed: 3" dia., Polyurethane Outfeed: 2 3/8" dia., adjustable, Table Bed Rolls (2): Adjustable, Table Size: 22" X 28", Chip Chute Opening: 6" O.D. StandardIncludes: Basic machine, 3-knife cutterhead, sectional serrated infeed roll, double bed rolls and polyurethane outfeed roll, sectional chipbreakers, dust chtue, knife-setting gage, wrench and instruction manual.

Manufacturer: Delfa Woodworking
SKU: 4400152
Category: Power Tools > Planers/Joiners > Thickness Planers

Holds up to a 35' tape Reinforced belt tunnels Double-stitched in high wear areas for long life Size: 4.5" W x 6" H

Manufacturer: DeWalt
SKU: 2205130
Category: Jobsite Equip. & Storage > Tool Storage > Tool Belt s/ Bags