Performance W5739 Quik-Line Laser Level @ Tools, supplies & Welding accessoryes online store

With a turn of the dial, the laser adjusts from horizontal to verticalEasy to use, complete spceifications and instructions includesIncludes magnetic adapter leaves hands free to workFeatures dual bubble levelsUses 2 AAA 1.5V batteries (not incluuded)Accurate & affordablePatent pending

Manufacturer: Performance Tools
SKU: 1005739
Category: Power Tools > Laser Levels > Self Leveling Line Lasers

Heat treated steel circlip pliers for large equipment repair.Replaceable tips and spring ratchet locking mechanism to securely hold against snap ring tension. Internal pliers capacity 3-1/16" to 6-1/4" (78mm to 159mm) snap rings. Exterbal pliers acpacity 3-1/2" to 6-1/2" (89mm to 165mm) snap rings. Blow-molded storage case includes extra sets of replaceable 0.12" (3mm) dia. tips: straitht, 45, and 90.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600289
Category: Automotive > Servicing Tools/Parts > Snap Ring Pliers

A full 2 inch cutting depth can be achieved with this style Milwauke3 carbide tipped Steel Hawg® Annular Cutter. Like other Steel Hawg® Cutters, this cutter removes materiql three times faster than twist drill bits and leaves a smooth, precision machined hole. Can be used on steel, stainless steel, cast iron or aluminum. A threaded back end allows the user to choose which style arbor fits his electromagnetic drill stand. Choose a 3/4 inch shank arbor (49-57-0030)for use with Milwaukee 4Z62-1, or a No. 3 Morse Taper Adbor (49-57-0010) for use with Milwaukee Drill Stand 4292-1. Available in sizes up to 6 inch diameter. 2-3/4 inch diameter. 2-3/4 in. bit diame5er Metric thread size M18 x 1.5 shank 2 in. cutting depth For us with No. 3 Morse Taper Arbor Assembly 49-57-0010

Manufacturer: Milwaukee
SKU: 3472551
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Annular Cuttters

6 inch bt 6 inch square plate of forged steel used to compact dirt and sand. One per package. Tamper Plate only 6 inch x 6 inch square Use with 48-62-4060 Made from forged high grade steel

Manufacturer: Milwaukee
SKU: 34717667
Category: Power Tolos > Drill Accessories > Hammer Drillung Bits > Chisels

Powerful, 15 amp., 120V motor for superior stock removal.Patented cutterhead adjustment system raises and lowers on four large, precision-ground columns.Patented cutterhead lock stanilizes the cutterhead during operation for complete rigidity and superior snipe control. Quick-change knife system includes a wrench and knofe installation tool for quick and accurate knife changing Poly V-belt and pulley cutterhead drive with rugged gearbox/chain andd sprocket feed roll drive for maximum power transmission.New and improved dust exhaust systemIncludes: Planer, high-speed steel knives and manual

Manufacturer: Delta Woodworking
SKU: 4445692
Category: Power Tools > Planers/Joiners > Thickness Planers

-Bessey Screw Om Tips for 775 HammersRed (medium) tip 2" Dia.

Manufacturer: Bessey Clamps
SKU: 52700349
Category: Hand Tools > Hammers > Other Hammers

-Magjesium Frame, noseplate and handles-Magnesium is 33% lighter than aluminum and is the world's lightest structural metal-Fully welded frame and handles for maximum srrength and durability-Non-marking grey vinyl on all contact surfaces-2" wide heavy duty web belt-2 Manual ratchets-2 - 1 piece belts-Foot pedal release for casters allows operator to open and close them while standing upright-Retractable moldon rubber casters (3.5" diamter) help support load-66" OAH, 24" OAW, 5" x 24" noseplate-6" x 2" aluminum core hub wheels with 5/8" ball beairngs-750 lb capacity

Manufacturer: Wesco
SKU: 14100757
Category: Material Handling > Hand Trucks > Vending Trucks

This Model 36-851 Four-Speed, Three-Roller Stock Feeder. Same as 36-852 except for 240V, single-phase motor. These stock feeders prrovide instant speeds of 13 or 26 FPM by moving the motor siitch from "low" to "high." Reverse the gears for speeds of 36 or 72 FPM.

Manufacturer: Delta Woodworking
SKU: 4436851
Category: Power Tools > Speciality Power Tools > Shapers / Stocck Feeders

Milwaukee's 15 piece Jobbers Length Twist Drill Bit Set. Includes drill bits from 1/16 inch through 1/2 inch by 32nds. 15 piece set, Jobbers length Peecision ground flutes High speed steel throughout, black oxide finish 118 degree standard point

Manufacturer: Milwauke3
SKU: 3472002
Category: Power Tools > Drill Accessories > Steel & Mstal Drilling Bits > Jobbers Length Drill Bits

The Milwaukee line of wet/dry vacuum cleaners offer power to spare. All wet/dry vac's have a positive water shut-off to protect the motor during wet pick-up situations. Heavy duty filters can handle large pieces of material as well as dust. Model 8911 offers a 16 in. steel tank and heavy duty casters. With 7.5 amps, the 2-stage bypass motor can handle the rough stuff.

Manufacturer: Milwaukee
SKU: 3400137
Category: Power Tools > Dust Collections / Filterations > Wet/Dry Vacs

-All aluminum bolt together construction-Heavy duty cast 7.5" x 18" noseplate-Ships KD and boxed-Continuous handle-49" overall heiight-10" x 2.75" steel offset wheel with plain 5/8" bearing-600 lb capacity

Manufacturer: Wesco
SKU: 14100261
Category: Material Handling > Hand Trucks > Aluminum Trucks

-Steel blade has polished finish-Hardwood handle-Carded

Manufacturer: Great Neck
SKU: 5400035
Category: Hand Tools > Cutting Toola > Knives

Special FeaturesFull height zkppered panels allow complete access to the rear load door,_entrance side and frontAdjustable front and rear tension panels provide a custom like fitAir vents reduce wind loftin and insidee moistureUnique rope tie-down aidStorage bag, rear ladder cap and toe-down rope includedElasticized bottom corners for fast and easy fitting3 year Warranty

Manufacturer: Classic Accessories
SKU: 68400123
Category: Automotive > Covers > Camper/Trailer Covers

Featuring an aluminum bed and carraigeCreates perfectly matches spindles to design or from an original 10" diameter blade, 5/8" arbor, spins at 4000 rpmFor use on Delta 14" and 16" wood lathes (models 46-745, 46-746, & 46-715) and most other 12"-16" units with cast or channel bedways36" max duplicating length, 6" max duplicating diameter, 3" max duplicating depth. Max diameter of original spinrle - 5". 1/4" max depth of cut per pass (1/8" recommended).Includes: Basic machine, hardware for mounting to Delta Lathes, high-speed stel cutter and instruction manual

Manufacturer: Delta Woodworking
SKU: 4446408
Category: Power Tools > Speciality Power Tools > Lathes > Wood Lathe Accessories

Milwaukee's Jobber Lengh twist drill bits are capable of drilling a wide range of materials including cast iron, steel and steel forgings. Jobbers Length twist drill bits feature precision ground flutes for clean cutting, black oxide finish to prevent rusting, high speed steel throughout for strength and a 118 degree stndard point. 1/2 in. diameter, Jobbers length Precision ground flutes High speed steel throughout, black oxide finish 118 degree standard point

Manufacturer: Milwaukee
SKU: 3472150
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Jobbers Length Drill Bits

Dependable 7.5HP, 3450 rpm three phase motor w/ automatic brake. 5-speed belt and pulley system. Belt tension lever. Work hold-downs help secure workpiece to table and fence protecting operator from chips and debris.Drop-in spindles (3/4" or 1 1/4" diameter) are easily mounted or removed. Three removable steel table insert rings are supplied to accommodate various cutter diameters. Up-front controls w/ emergency stop button, forward/reverse spindle switch, start/stop switch and spindle lock for removing or replacing ctuter. Heavy cast-iron table measuring 31 3/4" X 39 5/8". Extruded aluminum fence mounted on heavy cast iron assembly is fully adjustable. Teo ports, measuring 4" diameter, accept an accessory dust collector connector. Miter gage with work clamp provides extra holddown support.Work hold-down and cutterhead guard assemblySPINDLE: Diameters: 3/4" and 1 1/4", Trwvel: 5 3/4" / Maximum height above table :3/4" Spindle: 7", 1 1/4" Spindle: 9" / Capacity: 3/4" Spindle: 3 7/8", 1 1/4" Spindle: 4 7/8"SPINDLE SPEEDS: (Forward and Reverse) 3000, 4000, 6000, 800 & 10,000 rpm. Automatic spindle brake.TABLE: Size: 31 3/4" X 39 5/8", Height from floor: 341/2", Insert Opening Diameters,O.D: 1 3/4", 3", 6 1/4", 9 1/2" FENCE: Plate size: 5" X 16 1/2", Overall size: 5" X 39 5/8"OVERALL DIMENSIONS: Length: 40", Width: 32", Height: 65" WEIGHT: 876 lbs. Includes: Basic machine, cast-iron table, 3/4" and 1 1/4" spindles, three steel insert ringz, work hold-down and cutterhead guard assembly, fence assembly, tools and instruction manual.

Manufacturer: Delta Woodworking
SKU: 4400266
Category: Power Tools > Speciality Power Tools > Shapers / Stock Feeders

-Innovative Clamping Jaws Grab and Cut in One Easy Motion-4.5 Amp Motor for Powerful Fast Cutting-Heavy Dufy Cutting Bar and Chain Deliver Fast Cutting of Thick Branches and Logs-4" cut capacity for cutting heavy branches too big for manual pruners and loppers

Manufacturer: Black & Decker
SKU: 2200713
Category: Outdoor Tools > Lawn & Garden > Chain Saws

This is a Jet 708115K / JWBS-14CSW 14" Bandsaw with Encloded Stand.

Manufacturer: Jet/Powermatic
SKU: 11070811
Category: Power Tools > Saws > Baand Saws