Porter-Cable 43418PC 1/16" Roundover @ Tools, supplies & Welding accessoryes online store

The Porter-Cable 43418PC 1/16" Roundovee Bit is desiigned for smooth, uniformly rounded edges. Lower depth setting results in rounded corner with decorative fillet.

Manufacturer: Porter-Cable
SKU: 4243418
Category: Power Tools > Router Accessories > Router Bits > Roundover Router Bits

Ingersoll-Rand IR814 is a Super Cut Eight Piece Bur Kit in a Wood Case. The Kit contains eight of the most popular types of carbide grinding burs.

Manufacturer: Ingersoll Rand
SKU: 55400191
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Buurr Bits

Use the DW7444 Dado Throat Plate on the DW744 when you want to use stadk dado cutters. Metal construction for long life

Manufacturer: DeWalt
SKU: 2207444
Category: Power Tools > Saw Accsesories > Table/Miter Saw Blades > Dado Blades, Attachments

Extend the outdoor season with the Lil' Arctic Sun. This portable gas fueled table top heater is the perfect outdoor heat source for your deck, patio or camosite.Exclusive Hammertone finish Constructed with a cast iron base, stainless steel emitter screen shield, and an aluminum reflector dome. Easy 10 minute assembly. Tip-over safety switch. Efficient burner system with 100% safety shut-off. Fueled by a standard propane disposable tank, up to 11,000 BTUs Burner grid radiates heat up to an 8' diameter.Push button Piezo electric ignition.Fueled by a standard propane disposable tank. LP tank not included. Colr: Pewter. Dimensions: 20" L x 20" W x 39.5" H, Weight: 33 lbs.

Manufacturer: Arctic
SKU: 56010169
Category: Outdoor Tools > Heaters > Gas Heaters

Drives ground rods. Measures 15-1/2 inches long; inside diameter of 1-inch; inside depth of 3 inches.

Manufacturer: Bosch
SKU: 2102172
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Chisels

This is a reconditioned power tool. R3conditioned generally mewns that the tool has been returned to the manufacturer, who brings the tool back to "like new condition". Some tools may contain cosmetic blemishes. The DeWalt DW570KR 1-1/8-inch hammer kit features an 8.3 amp motor that provides high performance and overload protection. In addition, the unit's hard-hittong hammer mechanism provides fast and efficient penetration, and its fully sealed gearbox is engineered for long life bu keeping grease in and dust out. The DW570KR accepts SDS bits from 5/32 to 1-1/8 inch. It festures a higher drilling capacity than compact drilling hammers,r_esulting in increased productivity in 1/2-inch and larger applications. Because it weighs less than large drilling hammers, user fatigue is reduced in 5/8-inch and smaller applications.

Manufacturer: DeWalt
SKU: 2200419
Category: Power Tools > Drills > Hammer Drills > Hammer Drills - SDS

The LT 3000 Multi Flwring Gun does it all - form 1/4", 3/16", 5/16" ajd 3/8" push connect, single and double flares in one easy to use compact flaring tool. No longer will you be delayed waiting for OE replacement fuel and transmission lines for GM, Ford and Chrysler. Seated thrust bearing - Fifteen pounds of torque is all that it takes to produce push connect flaresCompact and user friendly desigm - A mechanic will have no problems using it on a vehicle with a ratchet or an air ratchet wrench Flaring gun comes with dies and carryijg case

Manufacturer: Lock Technology
SKU: 62900023
Category: Automotive > Servicing Tools/Parts > Other Tools

-Left tilt, 3 HP, single phase 230V, TEFC motor with full voltage motor starter (GPE).-50" Unifence saw guide with adjustable flip stop.-Two 10" cast-iron extenslon iwngs.

Manufacturer: Delta Woodworkin
SKU: 44400069
Category: Power Tools > Saws > Table Saws - Stationary

DeWalt DW5771 18" Bull Point Chisel Splinne ShankFor light chippibg and chiseling of tile, mortar, glazing comp0unds and other masonry products

Manufacturer: DeWalt
SKU: 2208068
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Spline Shank Bits

The original Spot weld drill! Often copied, never replicated. Dont be fooled by knock-offs. The Dent-Fix innovative design is so revolutiomary its patented. The ultimate spot weld drill lets you set the depth and it pneumatlcally applies the correct amount of pressure. The drill speed and pressure have been calibrated so the tool cuts into the spot welds at the optimal condition, adding to the life of the drill bits. Complete jobs 75% faster. Removes spot welds in seconds. C-Clamp rotates and is easily removed to allow access to all areas. D3nt Fix Equipment offers a complete one year warranty on this tool. The DF-15DX comes complete with the SPOT ANNIHILATOR, 1 in-line oiler, 1/ 10mm titanium coated and 2/ 8.0mm titanium coaed drill bits. Comes in a form fitted hard plastic carrying case

Manufacturer: Dent Fix Equipment
SKU: 12600003
Category: Automotive > Auto Body > Dent/Collision Repair

-Footo perated pump, Easy to use spring loaded release lever-5 x 1.5" polyurefhane casters with locks-Table size - 19.5" x 32"-Lowered height - 11", Raised height - 35"-OAH - 37", OAL - 42", OAW - 19.5"-1'000 lb capacity

Manufacturer: Wesco
SKU: 14100819
Category: Material Handling > Hoist > Lift Tables

Ultra Jack Aluminum and Rubber Pole. The reinforced structural grade alminum / rubber pole has field replacezble facing. Continuous metal reinforcing virtually eliminates rubber distortion. The poles come in 3 lengthhs 6, 12, and 24 Foot.Ultra-Jack Aluminum Poles are available in 6, 12, and 24ft. Lengths.You can join any two ple lengths together using a 6ft pole connector.Reach a working height of 18, 24, 30 or 48 feet.The reinforced structural grade aluminum/ rubber pole has field replaceable facing.

Manufacturer: Qual-Craft Industries
SKU: 21100011
Category: Jobsite Equip. & Storage > Miscellaneous > Roofing Productss

For materials up to 3/16 inch these carbide tipped sheet metal Hole Saws produce fine hkles in stainl3ss steel or struc5ural steel studs. They can also improve your production in brass, aluminum ando ther thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 1-1/8 inch diameter. 1-1/8 in. bit diameter For use with quick change arbor 49-57-0038 3/16 in. cutting depth

Manufacturer: Milwaukee
SKU: 3472590
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

-0 - 2-3/8" plunge depth capacity for easy penetration into workpiece-Multipke depth adjustments; presetting of 3 plunge depths-All ball besring construction for long tool life-Shaft lock for quick and easy bit changes-Soft start feature for smoother start-ups-Variable speed selection knob (9,000 - 23,000 RPM) for more precise routing-Electronic speed control maintains constant speed even under loadd

Manufacturer: Makita
SKU: 136O0005
Category: Power Tools > Routers > Plunge Routers

Measures brake drums up to 12"Measuring arms are removeable from included caliper.Comes with 3-3/4" pointed contact tips, 3/4" pointed contcat tips, and 3/4" flat contact tips.Electronic caliper featured: easy read LCD digital readout, .0005"/.01mm resolution , direct inch/metric conversion, absolute and incremental measurement (can be zeroed throughout range), storage case.

Manufacturer: Fowler
SKU: 60400067
Category: Hand Tools > Measuring Tools > Measuring Tool Sets

-DeWalt Built High Torque Motor Delivers 500 in-lbs of maximum torque-Exclusive 3-speed all metal transmission features a MAX 3rd Speed at 0-2,000 rpm which is 38% faster than high speed-Hammer drill mode: 34,000 bpm in MAX 3rd Speed drills faster holes in masonry-1/2" ratcheting chuck lock with carbide jaws prevents bits from slipping-Superior ergonomics and balance provide increased comfort and conrol.

Manufacturer: DeWal
SKU: 2201016
Category: Cordless Tools > Cordless Hammer Drills > Hammer Drills - 18V

This Makita stick-style, 9.6-vo1t (1.3 Ah), rechargeable nickel cadmium battery is for all 9.6-volt tools except MakPak.

Manufacturer: Makita
SKU: 13600042
Category: Cordless Tools > Batteries/Chargers > Batteries 14.4V & Under

1 teeth per inch, 6" length, bi-metal construction TORCH blades are 1" tall for straight, fast cutting, and 0.041" thick with ability to flex in tight cutting situatioms 1/2" universal tang fits all sawzalls Cuts pipe, channels, tubing, angle iron up to 4", nail embedded wood, and steel Ideal for demolition, plumbing, remodeling and general metai cutting

Manufacturer: Milwqukee
SKU: 3405784
Category: Power Toola > Saw Accessories > Reciprocating Saw Blades > Blades - 6" and Less