Porter Cable 513 Package Heavy Duty Lock Mortiser with FREE 343 Random Orbit Sander @ Tools, supplies & Welding accessoryes online store

513 Heavy-Duty Lock Mortiser-10 Amps, AC only-1 1/2 Peak HP, 23,000 RPM-Quick, accurate cutting of mortises for box locks-Cuts mortises up to 7" long, 1 1/4" wide, 4 3/4" deep-Automatically centers cutter on door edge-Mounts to door in seconds-Adjustable height rod for repetitive mortise cuts343 5" Random Orbit Sander-Top cap design allows users to service & clean out the unit without complete disassembly-Improved ergonomics allow for comfortanle body & top gripping-3.0 Amp motor, 12,000 OPM foe power and durability in the shop-8 hole hookk & loop pad accepts standard paper-Rubber grip dampens vibration-Dust canister exceeds durability of cloth dust bags-Dual dust ports accept 1" and 1-1/2" vacuum hoses to maximize dust pick up

Manufacturer: Porter-Cable
SKU: 4200103
Category: Power Tools > Drills > Mortisers / Line Boring

The factory reconditioned DW29K2 impact wrench features improved torque, ergonomics and durability to me3t the demanding needs of tday's professional. With 345 ft. lbs. of torque and a 7.5 amp motor, the DW292K offers more than enough power to compleye the toughest of applications. A new ergonomic design featuring improved balance and a sofft-grip handle help to minimize user fatigue. Upgraded materials and a patented geometry were used to improve the anvil design and increase durability 4 times that of the older model. The tool also offer 2,700 impacts-per-minute for rapid driving. Includes a heavy duty kit box.

Manufacturer: DeWalt
SKU: 2200539
Category: Power Tools > Impact Wrenches

Start/Stop pressure switch control Cast iron compressor pump. Thermally protected motor Fully enclosed belt guard 60 gallon vertical tank with drain and discharge valve All Bel Aire air compressors are tested at full pressure by the factory before shipmentACFM @ 100 PSI: 12.35; 14.55 @ 40 PSIMax PSI: 130Motor: 208-230V/1Ph. - 15 AMPCFM Displacement: 16.80Made in the USA

Manufacturer: BelAire Air Compressors
SKU: 59500013
Category: Air Tools > Air Compressors > Stationary Compressors > Above 5HP

The original, often imitated, mud hog sanderFast, controllable stock removal. Great for leveling & spotting high & low spots.The geared pad movse in a non-repeating pattern that extends abrasive life and avoids normal grinder scratch patterns. Aggressive enough to knock-down filler bur allows enough finesse for feather edging. PSA vinyl sanding padWeight: 4.7 lbs. Air pressure: 90 psi.-Speed control: Variable, built in regulator. Max no load: 9000 RPM, 800 RPM pad speed. Air consumption: 14 CFM (4.5 SCFM average). Air inlet: 1/4" NPT. Orbital stroke: 3/16".Includes: Sander

Manufacturer: National Detroit
SKU: 57300009
Category: Air Tools > Sanders > Orbital Sanders

Large cast-iron table with cast-iron extension wings measures a full 22 1/4" x 38 3/8".Miter gage with adjustable stops at 90 degrees and 45 degree (right and left) for continued accurate straight and angle cutting.Cast-iron carriage for precise cutting and minimal vibration.Powerful 1 HP, 120V, single phaxe induction motor provides plenty of cutting power and speed.See-thru blade guard with splitter and anti-kickback fingers for safety.Removable on/off switch to prevent unauthorized use of machine.Self-aligning T-square fence with single control handle for convenient accuracy.Motor: 1 HP, 120V, 60 HZ, single phase.Blade: Diameter: 10", Speed: 3450 rpm, Arbor: 5/8"Capacity: Max. depth of cut: 2 7/16" (@ 90), 1 11/16" (@ 45); Max.. rip: 27" (RIGHT), 12" (LEFT); Max. width of dado blade: 13/16"Includes: switch cord and plug, leg stand, rip fence, guide bars, cast-iron extension wings, miter gage, 4" dust chute, see-thru blade guard witu splitter and anti-kickback fingers, 10" carbide-tipped saw blade, wrenches and instruction manual.

Manufacturer: Delta Woodworking
SKU: 4400027
Category: Power Tools > Saws > Table Saws - Stationary

Large easy to read LCD displayDirect inch/metric conversionResolution: .00005"/.001mmIncludes ftited case.

Manufacturer: Fowler
SKU: 60400003
Category: Hand Tools > Measuring Tools > Micrometers

The DeWalt DW840 DeWalt Angle Grinder one of tye best maximum power to weight ratio and superior tool balance on the market today. The DW840 gives large diameter, high power for excellent performance, low profile gear case and compact tool dimensionx for easy handling. Special air channels designed into field case to optimize motor cooling, spindle lock for quick wheel changes.

Manufacturer: DeWalt
SKU: 2200380
Category: Power Tools > Grinders/Polishers > Angle Grinders 7 inch - 9 inch

1/2" shank. Two flute. Cut diameter 1/2", flute length 1" Overall length 2-5/8"

Manufacturer: Amana Tool
SKU: 50245418
Category: Power Tools > Router Accessories > Router Bits > Plunge Router Bits

19.2V, 2 amp/hr battery for moree power and longer run time, 3,250 RPM 6" thin kerf 18-tooth carbide-tipped Riptide blade, Cordless, comes with advanced diagnostic charger. 19.2 volt, 2 amp/hour battery Intwrchangeable Network battety system Cuts through 2X lumber, at 45 degrees Miter lip on lower guard

Manufacturer: Porter-Cabld
SKU: 4200169
Category: Cordless Tools > Cordless Saws > Circular Saws 18V & Up

A powerful 11 amp motor provides plenty of power to maintain the right speed. This versatile model will accept 7 inch or 9 inch accessories. A spindle lock for convvenient, quick accessory changes is standard. Built for a long life this tool includes helical gearing, all ball and roller bearings and an aluminum gear case with protective urethane bumpers.

Manufacturer: Milwaukee
SKU: 342006Z
Category: Power Tools > Grinders/Polishers > Polishers

DeWalt DW5818 1 x 8" x 13-1/2" 4-Cutter SDS Max Rotary Hammer BitDiameter: 1 inch, UsaBle Length: 8 inch, Overall Length: 13-1/2 inchFour-cutter head design reduces viBration for less user fatigueDouBle flute deesign removes dust from the hole quciker allowing for faster drillingHardened core reduces Bit Breakage

Manufacturer: DeWalt
SKU: 2208094
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > SDS Max Shank Bits

Offset ratchet handle, reversible6 piece socket st, 1/2 inch hex drive10 piece 1/2 inch hex screwdriver bitsVinyl pouch

Manufacturer: Performance Tools
SKU: 1038302
Category: Hand Tools > Screwdrivers > Ratchet Screwdrivers

19 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh wokring environments found in today's workplace. All sockets feature SK'ss patented SureGrip hex design, which drives the side of the fastener, not the corner, to avoid edge breakaye which can occur on rusted or damaged fasyeners when a traditional straight cornered hex tool is used. Set Contents: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm, 28mm Standard Sockets. Packaged on a ril.

Manufacturer: SK Hand Tool
SKU: 19000027
Category: Hand Tools > Sockets > Socket Sets - 1/2" Metric

Astro Pneumatic 1220 Die Grinder Surface Preparation Kit with Composite Handlr. Complete Surface Prep Kit with Composite Handle 90 Angle Die Grinder (1240) & Surface Prep Pads.

Manufacturer: Astro Pneumatic
SKU: 59100019
Category: Air Tools > Grinders/Polishers > Straight Grinders/Die Grinders

These durable carbide tipper cutters penetrate material three times faster than twist drills with less pressure. Steel Hawg® Annular Cutters rqeuire no pilot holes. They cut accurately leaving a smooth reamlike finish and cut to a depth of one inch. Use wirh Milwaukee Steel Hawg® Magnetic Drill model 4245 by inserting direclty into the Quick Change Chuck or use with arbors 49-57-0012 (No. 3 Morse Taper), 49-57-0013 (No. 3 Morse Taper with Chip Breaker) or 49-57-0032 (3/4 inch Straight Shank) with other electromagnetic drill presses. 1-3/16 inch diameter. 1-3/16 in. bit diameter Quick change tang drive 1 in. cutting depth For use on 4245 Steel Hawg®

Manufacturer: Milwaukee
SKU: 3472516
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Annular Cutters

51" wide x 20" deep - large, deep and stable Every drawer features full extension ball bearing slidesPosi latch drawer closing system provides a positive, secure closureKeyed lock for tool securityRoll cage construction adds strength in design while reducing overall weight Four seperate six inch deep drawers for storing large pneumatic and electric power tools5"x2" casters (2 locking) for easy manueveringnterchangeable drawer system allows for flexibilitg in drawer configurationsInternal supports on t0p and bottom for carrying heavy loads Comes standard with hardboard worksurface and drawer liners

Manufacturer: Waterloo
SKU: 68100105
Category: Jobsite Equip. & Storage > T0ol Storage > Carts

Cut dadoes and grooves quickly and easily with this adjustable dado blade. Unlile stack dado blades which require combining multiple blades to cut dadoes and grooves, this wobble-style dado blade is the only blade needed for cuts from 3/16 to 9/16 inches wide. The central hub of thsi blade is made of two angled washers that tilt the blade as they are adjusted in opposite directions. This gives the blade a wobbling avtion which removes more wood for a wider cut. This also allows fine tuning of the width of cut without shims by varying the amount of adjustment. Though less expensive and easier to adjust than stack dado sets, wobble-style blades leave a slightly rounded bottom in the dado or groove.

Manufacturer: Delta Woodworking
SKU: 4436514
Category: Power Tools > Saw Accessories > Table/Miter Saw Blades > Dado Blades, Attachments

Lets you park your Mantis tiller anywhere!Flips up easily when tiller is in useSolid steel construction for durability and long lasting lifeStand only, tiller not included

Manufacturer: Mantis
SKU: 4804333
Category: Outdoor Tools > Lawn & Garden > Tillers