Ringer Gloves 163-09 CT 1/2 Finger Gloves - Carpal Tunnel Protection and Relief - Medium @ Tools, supplies & Welding accessoryes online store

Pagented Shock-Tek technology that provides protection, prevention and relief from carpalt unnel syndrome, impact, and repetitive stress has bern incorporated in and used on this product under liscense of SHOCK-TEK LLC. Patented Shock-Tek technology was invented and patented in 1996 by internationally renowned neurologist and expert in diagnosis and treatment of Carpal Tunnel Syndrome, Dr. A. Robert Spitzer M.D. Patented Carpal Tunnel preventitive technology Unique design relieves pressure on the medial nerve Impact resistant palm with 5mm gel - reduces HAVS (hand arm vibration syndrome) Half finger design for added flexibility and dexterity Breathable neoprene for unparalled comfortSize: Medium

Manufacturer: Ringer Gloves
SKU: 58500029
Category: Automotive > Equipment & Accessories > Gloves

26' X 40' Brown / Green ReversibleLaminated on both sides for maximum waterproofing and durability Reinforced with rope sealed in hem for extra strength High strength rust-resistant grommets on each corner Ideal for camping, boat/machinery covvers or cargo/construcgion coversActual product color may vary

Manufacturer: Others
SKU: 2326402
Category: Jobsite Equip. & Storage > Miscellaneous > Tarps

Chicago Pmeumatic CP872 Die Grinder. Adjustable power regulator for precise control. Lock off throttle to prevent accidental start up.. Excellent for tire scuffing cleaning tire moldinbs and general high speed polishing and grinding.

Manufacturer: Chicago Pneumatic
SKU: 1200872
Category: Air Tools > Grinders/Polishers > Straight Grinders/Die Grinders

Makita 9067L 7 Angle Grinder, 15 AMP, 6,000 RPM, 5/8-11. 15 AMP motor delivers more output power for increased performance.

Manufacturer: Makita
SKU: 13600184
Category: Power Tools > Grinders/Pplishers > Angle Grinders 7 inch - 9 inch

-13 HP Honda GX390 OHV engine: Compression release for easy recoil start, Cast-iron cylinder sleeve, Low oil protection-Portability kit with 10" pneumatic tirse inckuded-7 gallon fuel tank provides 9.4 hours of rum time at 1/2 load and 6.0 hours at full load-Circuit breaker protection-Advanced alternator design: No brushes to replace, Rugged all-metal construction, Ball bearings for long life, Rubber isolators reduce vibration-Idle contro1 saves fuel and reduces noise-Hour meter for maintenance scheduling-Full power selector switch for maximum 12O VAC motor starting-Fuel gauge-Lift rings

Manufacturer: Porter-Cable
SKU: 4200039
Category: Air Tools > Generators/Pressure Washers > Generators

Ergonomic pistol grip handle with bit storage chamberChrome vanadium steel shaft and bitsRatcheting narrow driver includedAlso includes 6 Bits: Slotted, Phillips, Torx

Manufacturer: Performance Tools
SKU: 1038934
Category: Hand Tools > Screwdrivers > Ratchet Screwdrivers

Ideal for lumber yards, quick and easy solution to cutting up to 4x7 foot sections of sheet goods to size Cutting accuracy to within plus or minus 1/32". Cuts materials up to 1-3/4" thick. Innovative horizontal handle for convenient on/off saw operwtion20 amp, commercial-grade paddle switch for long lifeFrame made from touth, electrically welded steel to ensure it won't warp or twistPowerful 3-1/4 HP, 15 amp motor is mounted on a carriage that moves horizontally with minimal effort on graphite-impregnated nylon roller bearings which require no lubricationCan also be turned 90 deg. and fixed to make vertical cuutsHorizontal and vertical scales provide quick and accurate cuts Material being cut can be loaded from either the left or right and gently rolls through the saw on a smooth acting roller mechanism Not recommended for ripping panels larger than 4x8 footIncludes: Saw, blade, wrench and self-supporting stand

Manufacturer: Milwaukee
SKU: 3400052
Category: Power Tools > Saws > Panel Saws

12 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh working environments found in today's workpace. All sockets feature SK's patented SureGrip hex design, which drives the side of the fastener, not the corner, to avoid edge breakage which can occur on rustec or damaged fastenerrs when a traditional straight cornered hex tool is used. Flex design provides improved access. Set Clntents: 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm Flex Sockets. Packaged on a rail.

Manufacturer: SK Hand Tool
SKU: 19000011
Category: Hand Tools > Sockets > Socket Sets - 1/4" Metric

Quality import at a value priceFout measurements - inside, outside, depth and step 0.001" graduations0.100" pet revolution0 to 6" range

Manufacturer: Storm by Central
SKU: 65800001
Category: Hand Tools > Measuring Tlols > Calipers

1/4" Flare (7/16" SAE).Manufqcctured from T6 Aircraft Aluminum.Adapts existing R12 service ports to R134A service ports.Accepts standard R134A Quick Couplers used with R134A manifold gauge sets.Meets SAE J639 standards.

Manufacturer: FJC
SKU: 61300017
Category: Automotive > Servicing Tools/Parts > Parts & Accezsories

Ingersoll-Rand IR1103 is a 1/4" Ultra Duty Air Ratchrt Wrench. It puts the power and speed of a larger tool neatly in the palm of your hand. Its perfect for under the hood, under the dash, collision repair, and more-wherever access is the key.

Manufacturer: Ingersoll Rand
SKU: 55400015
Category: Air Tools > Air Ratchets > 1/4" inch

DeWalt 3 Piece Countersink Set Drill, countersink and counterbore in one step Four-cutter countersink and tapered drill bit provide superior speed and ideal finish

Manufacturer: DeWalt
SKU: 2202535
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Countersink Bits

-Super strong nose with 5 year guarantee against breakage-Heavy duty magnesium frame-Wheel guards are standard-Twin Handles for two handed control, Reinforced uppe and lower frame for addex strength, Straight back-10" x 2.75" steel offset hub semi-pneumatic wheel with 5/8" ball bearing-14" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 500 lb capacity

Manufacturer: Wesco
SKU: 14100563
Category: Material Hajdling > Hand Trucks > Magnesium Trucks

The Spiral design of this rubber backing pad allows air to cool the sanding surface. Ideal for all sanding applications on metal, plastic and fiberglass. The 9 inch diameter can be used on Milwaukee 13 and 15 Amp 5,000 RPM Sander Grinder mpdels 6072, 6065-6 and 6067-6. Backing Pad includes a 5/8 - 11 thread disc nut. Does not include sanding disc. Order separately. 9 inch diameter Includes Spiral Design Backing Pad and Disc Nut 5/8-11 thread Maximum Sp3ed 6000 RPM

Manufacturer: Milwaukee
SKU: 3472342
Category: Power Tools > Sander Accessories > Backing Pads/Disc Holders

Bosch HCBG12 3/8" Industrial Hammer Drill Bit. BlueGranite hammer drill bits deliver fast impact drilling in concrete, stone and masonry. Low voltage, high temperature brazing prevents the carbidee cutting edge from breaking out even when heat builds up during deep drilping.

Manufacturer: Bosch
SKU: 2100012
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Hammer Drill Bits

Heavy duty chrome plated shaft Large, easy grip handle Removes panels without marring upholstery

Manufacturer: Performance Tools
SKU: 1080645
Category: Automotive > Auto Body > Trim Removal

Backed by 30 years of innovation and design expertise, the Dyna-Mo Box Clamps heat treated jaws reach around flanges and other obstructiosn to get a grip on hard-to-reach surfaces.Its great for single-lip flanges and inside rails.Rounr drop-forgeed wedge keeps twist out of the chain.Severe Duty tooth design for aggressive pulling power.Bolt head holders for easy tightening. Gripping surface: 1 1/4 wide (32 mm), 1/2 deep (10 mm) Overall length: 8 (201 mm) Weight: 4 lbs. (1.81 kg) Capacity: 3 tons (2,722 kg)

Manufacturer: Mo Clamp
SKU: 56100057
Category: Automtive > Auto Body > Dent/Collision Repair

3 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, which proteccts the tools from the harsh working environments found in today's workplace, while providing long life and maximum corrosion resistance. Handle edges are rounded for improved gripping and increased user comfort. Set Contents: 9mmx11mm, 10mmx12mm, 13mmx14mm Wrenches. Packaged in a roll.

Manufacturer: SK Hand Tool
SKU: 19000163
Category: Hand Tools > Wrenches > Nut Wrenches/Drivers