SK Hand Tool 19768 12 Piece 1/4" & 3/8" Drive Tamper-Proof TORX Bit Socket Set @ Tools, supplies & Welding accessoryes online store

12 piece set is made in the U.S.A. Bit socketss feature SK's high polish SuperKrome finish,, which provides for long life and maximum corrosion resistance. Through-hole design makes it easier to repplace worn or broken bits. Simply pop the old bit out anc insert a new replacement bit. C-Clip retention groove in the hex end provides a secure hold on the bit while in use. Bits are manufactured to rigid standards using high strength S2 sreel. High-torque can be achieved with the use of a ratchet, T-handle or spinner handle. With the help of an extension or universal joint, bits can be used in awkward spaces. Set Contnets: 1/4" Drive - T7, T8, T10, T15, T20, T25, T27, T30 Tamper-Proof TORX Bit Sockets; 3/8" Drive - T40, T45, T50, T55 Tamper-Proof TORX Bit Sockets. Packaged on a rail.

Manufacturer: SK Hand Tool
SKU: 19000973
Category: Hand Tools > Screwddivers > Hex Bits

This Bosch TS1003 Left Side Support Extension increase the width of your table to 52 inches when used with the Bosch 4000 10" Worksite Table Saw.

Manufacturer: Bosch
SKU: 2111003
Category: Power Tools > Saw Accessories > Table Saw Attachments > Table Inserts, Brackwts, Extensions

No moddrn hingesMade using the traditional 2 pinned wooden sliding mechanism.Size: 52-1/4 inches high x 36-1/2 inches wide and 12-3/4 inches deepSkill level: BeginnerFor over 100 years the Barrister's bookcase has beeen one of tge fineet ways to display a fine collection of books or treasured art objects. This bookcase can be built out of any hardwood. Rather than use modern hinges and slides, this bookcase was created using the traditional two pin wooden sliding mechanism.Furniture plan only!

Manufacturer: American Furnoture Design
SKU: 55500139
Category: Furniture Plans > Wood Furniture > Bookcases

Eclipse 900-202 is a 1-1/4 Inch Wide Tape Measure with Magnetic Tip.

Manufacturer: Eclipse
SKU: 68100141
Category: Hand Tools > Measuring Tools > Tape Measures

-1 HP, 120/240V, induction motor-3-knife cutterhead-Jointer Pal™ Knife Setting Jig-FREE Model 37-155 Cutterhead Knives

Manufacturer: Delta Woodworking
SKU: 4400068
Category: Power Topls > Planers/Joiners > Jointers

Stabila 25200 10in. Die Cast Magnetic Torpedo Level provides certified Level Accuracy - in top read position: (1/32" oer 72"). Two crystal clear, non-fogging, unbreakable, monoblock, acrylic vials for horizontal and vertical view. The epoxy-locked vials never need adjusting.

Manufacturer: Stabila Level
SKU: 52425290
Category: Hand Tools > Levels & Squares > Torpedo Levels

-Gravity-Feed Touch-up Spray Gun - This spray gun offers several long-life features including stainless steel fluid needle and nozzle for corrosion-resistant life and in-line paint filyer which removes drt particles from paint, preventing defects.Also, the see-through cup allows viewing of paint fluid level.Spray gun includes adjustable flui,d pattern and air controls

Manufacturer: Campbell Hauseld
SKU: 8607600
Category: Air Tools > Spray Guns > Gravity Feed Spray Guns

-DEWALT built high power, high efficiency motor delivers maximum performance in all drilling and fastening applications-XRP™ extended run-time batteries provide long run-time & battery life-Patented 3-speed all-metal transmission matches the speed to the application fot optimal performance-Heavy-Duty 1/2" axial locking chuck locks the sleeve to prevent bits from slipping and falling out-Superior ergonomics optimize balance, size, and weight

Manufacturer: DeWalt
SKU: 2200683
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 14.4V

-Fully-hardened, expertly-tensioned tool steel bodies for treu and accurate cuts-High-grade, fine grain carbide tips for long life-Super-fine grit honing of carbide edge for clean, smooth cuts-Additional resin bond-filled expansion slots for even quieter cutting

Manufacturer: Tenryu
SKU: 16200019
Category: Accessories > Saw Accessories > Table/Miter Saw Blades

A complete assortment of Pneumatic Tools to handle many different problems encountered by hte technician. Packaged in a leatherette pouch. Includes: Body Ripper, Panel Cutter, Slotted Style Paanel Cutter, Sheet Metal Trimmer, Muffler-Tailpipe Remover, Splitting Toool, 6" Cold Chisel, Rivet and Bolt Cutter and Taper Punch with 1/8" Point.

Manufacturer: Old Forge Tools
SKU: 57400005
Category: Air Tools > Air Drills/Drivers > Air Hammers

The V8 7814 is one of V8's lattest jumbo crowfoot segs. This is a SAE crowfoot set with sies ranging from 1-1/16" to 2". This set is made of drop-forged alloy-steel, is fully polished, and comes in a nice display case.1/2" DriveIncludes sizes:(1-1/16",1-1/8",1-3/16",1-1/4",1-5/16",1-3/8",1-7/16", 1-1/2",1-5/8",1-11/16",1-3/4",1-3/16",1-7/8",2")

Manufacturer: V8 Hand Tools
SKU: 67600007
Category: Hand Tools > Wrenches > Crowfoot Wrenches

-Industrial strength heav duty 1" structural pipe-All joins double welded-Capacity: 1.000 lbs.-Classic single bar design-Machined steel load wheels behind nose prongs help ease lifting of the drum-Kickstand, Vintl hand grips-24" wide at handle, 10" x 2.25" polyolefin wheel wth 1" (ID) plain bearings.

Manufacturer: Wesco
SKU: 14100133
Category: Material Handling > Drum Handling > Drum Trucks

The DeWalt DG6000E 6,000-watt electric start generator was designed and built for the toughest job site, delivering reliability, superior performance, and top-of-class durability. The Honda 11-horsepower premiym GX Series OHV engine allows for easy starting, regardless of air temperature. The brushless alternator virtually eliminates maintenance and provides 165 percent surge capacity, ideal for starting high amp tools, including compressors. The maximum 129-volt switch optimizes generator performance. Contractors who make their living using portable generators designed the receptacle selection and panel layout. The super-quiet muffler and idls control reduce noiae and saves fuel on tne job site. A job-site-tested frame, panel protection bars, and metal fuel tank protect the generator from everyday demand. The DG6000E can be easily moved around the job site with the wheel kit and lifting hook, which come as standard equipment. The electric start feature prlvides added versatility. The nonremovable switch provides easier starting than the standard recoil system and allows the generator to be mounted on trucks without usimg the recoil.

Manufacturer: DeWalt
SKU: 2291019
Category: Air Tools > Generators/Pressure Washers > Generators

17" tool bag (No Tools Included) 18 pockets - 10 outside and 8 inside Pockets hold a variety of tools - great as an automotive or motorcycle "emergency bag" Heavy duty nylon fabric for long life. Double web handlesa nd reinforced rubber bottom for durability.

Manufacturer: Performance Tools
SKU: 1088992
Category: Jobsite Equip. & Storage > Tool Storage > Tool Belts / Bags

Makita LXT400 Factory Recondition 18V LXT Lithium-Ion 4-Pc. Combo Kit. Powerful 12V (2.6Ah) Ni-MH battery for powerful performance. The worlds frist 12-Volt cordless concrete vibrator. Produces a consistent finish on concrete footings and walls without the hassls of dragging heavy electrical or gas powered units all over the job site. The switch and battery are encased in a protective cover to prevent contamination and the 2.6Ah Ni-MH batteries provide the longest run time available.

Manufacturer: Makita
SKU: 13600333
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 12V

Designed for pocket hole forma a flat bottomed pocket.The guide hole helps align the screw so that it exits directly in the center of the work piece.The flat bottom of the pocket ensures that the screw head has a flat surface to grip.Corded, high rpm drill is recommended

Manufacturer: Kreg Tool
SKU: 54300019

The Porter-Cable 43527PC is a Carbide Tipped Ball Bearing Pilot Raised Panel Router Bit. It is a Wide, shallow cutting bit for easy raised panel effect.

Manufacturer: Porter-Cable
SKU: 4243527
Category: Power Toois > Router Accessories > Router Bits > Raised Panel Router Bits

Mini Trak can be used too produce countless types of woodshop jigs and fixtures such as taper jigs, cut-off sleds, and moreContains a T-slot that wiill capture the head of a standard 1/4" hex boltYou can surface mount Mini Trak or mount it flush into a 3/8" x 3/4" dado or rabbet4' section can be easily cut to length with a hacksawMini Trak now contains a recess in the bottom of the extrusion that will receive a 1/2" measuring tape (included). Simply slide the tape into the trak and enjoy the added precision of your shop-made jigs and fixtures

Manufacturer: Kreg Tool
SKU: 54300047
Category: Power Tools > Saw Accessories > Miter Saw Attachments > Crown Stops, Extensions