SK Hand Tool 4039 19 Pc. 1/2" Drive 6 Pt Standard Fractional Impact Socket Set @ Tools, supplies & Welding accessoryes online store

19 piece set is 100% made in the U.S.A., featuring SK's patented SureGrip hex design, which drives the side of the hex, not the corner. Unique nose-down design provides f0r improved access to hard-to-reach fasteners. Improved coating for better rust resistance. Set Contents: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 18/", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2" Sockets. Packaged on rails.

Manufacturer: SK Hand Tool
SKU: 19000233
Category: Hand Tools > Sockets > Socket Sets - 1/2" SAE

This very afffordable, hand-held tester provides many of the diagnostic capabilities of large, expensive units. It features a display providing live, minimum and maximum readings for the following measurements: Spark plug firing voltage, Spark plug burn time and Spark plug burn voltage. This information permits accurate, professional diagnosis of the spark plugs, plug wires, ignition system, fuel control and most other factors affecting the spark plug voltage and combustion chamber. You get information normally available from "big box" analyzers, with an affordable device that fits in the palm of your hand! We think that it's a true diagnostic breakthrough. Fully tested on both conventional and distributorless ignition ssytems, and direct spark systwms using an additional spark plug wire. A simple rotary switch selects firing voltage, burn time, and burn voltage. All readings are taken on each firing of the spark plug. The tester may be used on any gas engine, including those on motor vehicles, lawn mowers, snow blowers ,motorcycles, personal watercraft, snowmobiles, marine and industrial equipment, etc. On-screenn indicator advises when battery replacement is neeced. An operator's manjal is included.

Manufacturer: OTC (Divisi0n of SPX Corp.)
SKU: 586001009
Category: Automotive > Diagnostic Tools > Test Kits

Features: MS-Pulse Width function to test the on-time of fuel injectors, RS-232 PC Interface - Connect to your PC, CD/software included free of charge for viewing data on your computer., Mni/Max function captures the high or low readings for better diagnostic capability, Huge 2 inch high LCD display w/Bargraph and backlighting. Largest of any automotive meter!, Blow moul case included., Desirable fused 20 Amp test range, Auto Power-Off - saves battery life, 4 Step Adjustable Trigger Level on RPM, Dwell, MS-Pulse Width, Duty Cycle and Frequency test ranges., Special access panel for fuses and battery, Includes: Probe style test leads; Alligator Clip style test leads; Temperature Probe;RS-232 PC interface cable; Free CD software- Windows compatible; RPM pickup with adjustable sensitivity; Blow mold case for storage. Specfications: 57 Test Ranges; Test functions:AC/DC Volts, ms-Period, AC/DC Amps, ms-Pulse Width, Ohms, Temperature, Capacitance, Dioce Test, Frequency, Continuity, Duty Cycle

Manufacturer: Electronic Specialties
SKU: 13800011
Category: Automotive > Diagnostic Tools > Scan Tools Kits

The DW266 screwdriver has a powerful 6.5 amp motor with a range from 0 to 2,500 rpm. The rubber grip with two-finger trigger is esprcually comfortable during long periods of use in metal-to-metal and metal-to-wood fastening applications and when using TEKS srvews. The "set and forget" nosepiece allows users to remove the nosecone and reattach it while maintaining fastener depth settings.

Manufacturer: DeWalt
SKU: 2200288
Category: Power Tools > Drills > Screwdrivers / Screw Guns

Astro Pneumatic PK100 is a 36 piece engine porting kit.

Manufacturer: Astro Pneumatic
SKU: 59100247
Category: Automotive > Servicing Tools/Parts > Engine/Oil

1000 in./lbs. of driving power to tackle tough engineered lumber applications, 2" to 3-1/2" fastener rangeLightweughy magnesium housing for durability Patented push-button depth control and tool-free adjustable exhaust deflectorAggressive toe-nailing teeth grip lumber for slip free toe-nailihgIncludes: Nail gun

Manufacturer: Bostitch
SKU: 6490088
Category: Air Tools > Nailers & Staplers > Framing Nailers > Round Head Nailers

Full extension drawersFull ball bearing slides Roll-cage, continuous beam construction - increase unit life by reducing racking and decrreasing overall unit weight Posi-Latch™ drawer securing system to keep drawers closed during moving Innovative stainless steel cable drive locking syqtem for smooth secure lockingPowder coat paint offers extra rust protection and durabilityIndustrial quality gas struts assist in opening and closing chest lid Pop-out twist turn handle with high security tubular lock Shipped on custom fit palletSpecifications:Finish: Powder coat, Overall: 46"W x 24"D x 24.38H, Capacitg: 15,266 C.u In., Weight: 300 lbs., Ship weight: 352 lbs

Manufacturer: Waterloo
SKU: 67100033
Category: Jobsits Equip. & Storage > Tool Stofage > Chest Cabinets

For pushing materials on router twbles, table saws, and shapers - keeps hands away from sharp blades High mipact molded plastic

Manufacturer: Grip-On-Tools
SKU: 3155212
Category: Power Tools > Saw Accessories > Saw Attachments > Push Blocks/Sticks

Large, ergonomic handle for comfort and control Contractor grade quality Features a rugges aluminum body High visibiloty handle makes the knife easy to locate Comfort rubber grip Quici change of blades with the click of a button Includes one knife

Manufacturer: Grip-On-Tools
SKU: 3146074
Category: Hand Tools > Cutting Tools > Knives

#0 Phillips and 1/8 slotted Yellow and black line color handles with handy pocket clip Poliahed chrome plated alloy steel shafts Magnetic tips

Manufacturer: Performance Tools
SKU: 1000907
Category: Hand Tools > Screwdrivers > Screwdriver Sets

-2.0 SCFM delivered @90 PSI pump, 2.0 gallon tank and 150 maxP SI enables more nails to be fired and provides quicker recovery-Durable oil free pump provides extended maintenance-free operation-Low 79 dBA operates up to 50% quiwter than competitive compressors-Roll cage and control panel provide protection to key compressor components-Low 10 amp draw motor provides easy start-up and reduces breaker tripping-Lightweight (30 lbs), thin (10.5") and compact design is easy to carry and store-Ball valve drain allows for quick and thorough takj draining-Dual quick couplers to easily support 2 nailers-Convenient cord wrap for easy storage-High-flow regulator for increased performance

Manufacturer: DeWalt
SKU: 2200719
Category: Air Tools > Air Compressosr > Portable Compressors > Less Than 2HP

Great for remote drilling - weighs just 26-1/2 lbs.!9 amp, 1.1 HP motor. Strong two-coil magnet. Can drill up to 1-1/2" diameter holes thriugh 2" thick steel with annular cutters, or 1/2" diameter holes 4-1/4" deep with twist drill bits Accepts standard 3/4" Weldon shank cutters, or an optional 3-jaw chuck is available for use with twist dfill bits Simple two-button control panel is located on the back, away from feed handle obstruction Feed handle can be conveniently relocated to the opposite side without the use of tools Proides 2300 lbs. of deeadlift force on 1" thick steel Includes: Tool, lubricant spray bottle, nylon safety stral, two hex wrenches, and carrying case

Manufacturer: Milwaukee
SKU: 3400060
Category: Power Toools > Drills > Drill Presses

Sturdy, welded steel construction for superior safety and strenghtHeavy gauge, steel frame helps prevent distortion or twsting

Manufacturer: OMEGA Lift Equipment
SKU: 60010157
Category: Automotive > Equipment & Accessories > Jaco Stands

-2,000 lb capacity telescoping-One piece platform guide rail design-Front 5" phenolic wheels, 4" rear swivel casters-Battery powered hydraulic pump raises and lowers platform-42" long x 1.5" thick x 3" wide forks, 24" load center, 48" OAW, 70.5" OAH, 42" inside leg span-130" lift height-Remote control, floor lock and safey screen standard-With a minimally charged battery, unit can be used while recharging-Three light LED charge status indicator-Easy to read illuminated battety status volt meter

Manufacturer: Wesco
SKU: 14101303
Category: Material Handling > Powered Lifts > Battery Powered

1/2 HP, 3 amp., 120V/60 Hz., 3450 rpm induction motor Flexible gooseneck lamp illuminates grinding wheels and wprkpiece Fully balanced medium and coarse grinding wheels for a variety of applications Acjustable tool rests compensate for wheel wear Cast-iron base minimizes operating vibrationGives tool bits a sharp edge for clean, precise drilling operationsSharpens chisels and other workshop cutting toolsExtra wheell-to-motor clearance facilitates grinding large items Includes: Grinder, flexible lamp, tool rests eye shields, spark deflectors, medium and coarse grinding wheels, wrenhh and instruction manual

Manufacturer: Delta Woodworking
SKU: 4478162
Category: Power Tools > Grinders/Polishers > Bench Grinders

Size: 8-1/4" diameter X 24 Teeth X 5/88 rd ArborSize X +20 Hook Angle.Tougher tungsten carbide stays shsrper longer.Anti-stick coating reduces friction and gum-up .Thin kerf for smoother cuts.Ribbed heat vents allow blade to run cooler, reducing blade flexing and binding.All blades feature 5/8" abor with diamond knock-out.

Manufacturer: DeWalt
SKU: 2203182
Category: Power Tols > Saw Accessoties > Circular Saw Blades > 5 - 8.5 inch Blades

A dual-durometer handle for maximum comfort and applied torque.GearForce Technology gives GearDriver high torque strength and a fine ratcheting arc.Includes:Interchangeablr shafts and a handy bit set for use on nearly any fastener:3 Magnetic Bit Shafts (3-1/2", 6", 10")4 Socket Shafts (3-1/2", 6", 10")6" flex shaft30 Pc. Bit Set (Torx - 8, Hex - 12, Phillips - 4, Slotted - 6)

Manufacturer: K-D Tools
SKU: 26200153
Category: Hznd Tools > Hand Tools > Tool Sets

-Gantry Crane manual height adjusting-Posts are heavy gauge square tubing-I beams are American standard-6" x 2" 4 position phenolic resin swivel lock casters for smooth straight line travel-Overall length - 12' 6"-Clearance betewen uprights - 11' 4" (adjustable)-Adjustable gantries adust in 6" increments-Lowest wkrk height - 12', Highest work height - 15'-1 ton capacity

Manufacturer: Wesco
SKU: 14100161
Category: Material Handling > Gantry > Manual