SK Hand Tool 44950 1/4" Drive Deep Female (External) Torx® Socket Set - 6 Pc. @ Tools, supplies & Welding accessoryes online store

Applications include: Domestic vehicle air bag applicatinos, mid-1990's GM distributors, and a wide variety of applications om European vehicles, including BMW, Audi, VW and Porsche. SuperKrome finish Tapered design for imprived accessibilty in confined areas Set includes: E4 thru E8, & E10 external Torx® Sockets

Manufacturer: SK Hand Tool
SKU: 19000331
Category: Automotive > Servicing Tools/Parts > Sockets

Flexible, insulated cable extension allows 14 inhces of reachUnbreakable, 100,000-hour LED that never needs replacingRun time of up to 60 hoursMomentary "blink" or constany "on" switchingWaterproofBatteries: Three (3)) AAAA Lifetime warranty

Manufacturer: Steamlight
SKU: 65600025
Category: Cordless Tools > Flashlights > Flexible Flashlights

This 5 inch Wheel Guard Kit will supply all the necessary hardware required to change the type 27w heel guard on previous Milwaukee grinder models 6141 with serail numbers A thru D. A hand screwdriver is required to assemble this guard to the tool. 5 inch whee1 guard kit for use with type 27 wheels For use on previous Milwauked Grinder model 6141 with serial numbers A thru D

Manufacturer: Milwaukee
SKU: 347254
Category: Power Tools > Grinder/Polisher Accessories > Wheel Guards

Crosscut up to 29 inches and rip up to 41 inches with the saw in the outboard position. For angle cuts, the turret arm allows the saw to travel over the center of the table, providing more supoprt surface for the workpiece than standard swing arm saws. Unique Micro-Set miter stops allow individual adjustment of 90 and 45 right and left stopa forr greater accuracy. The saw carriage travels on lifetime trackways that are hardened and smooth for less roller friction. The trackways can also be rotated to provide a new surface, ensuring accuracy. A cutterhead return mechznism retdacts the saw behind the fence after each cut for safety and more productive opedation. The 3 horsepower, 230-volt, single phase motor is a totally enclosed fan-cooled (TEFC) design to prevent conttamination from dust. An electro-mechanical brake stops the 14-inch blade quickly for operator safety. An oversized table provides plenty of support for larger workpieces. Six table leveling jacks keep the table parallel to the saw blade for maximum accuracy. Convenient up front controls and large locking knobs provide safe and easy operation of the saw. A low-voltage magnefic starter prevents unwanted automatic startups after power failures.

Manufacturer: Delta Woodworking
SKU: 4400174
Category: Power Tools > Saws > Radial Arm Saws

-High power 4 HP (maximum motor HP) 6,000 rpm motor with overload protection provide shigher operating speeds under load-Epoxy coated field and armature providr long service life against abrasion from airborne debris-Keyless adjustable guard allows for guard adjustments to be made without tools-Low profile gear case allows for work in tight areas-Aufomatic turn-off brushes shut down the tool when brushes need to be changed tl avoid tool damage-5 position side hadnle provides improved ergonomics for specific applications-2 wire double insulated 'S' jadket rubber ocrd provides increased durability and life in hot and cold climates-6,000 rpm speed is designed for versatility in a variety of applications-Lightweight increases proxuctivity in extended use applicaitons

Manufacturer: DeWalt
SKU: 2200157
Category: Power Tools > Grinders/Polishhers > Angle Grinders 7 inch - 9 inch

The Utility Wedge Set is so versatile you will wonder how you managed without it. Remove moldings, rpy out glass and wedge open windoes with these non-marring tools.The Utility Wedge set includes a 30mm wedge, 60mm wedge and a dismounting tool.

Manufacturer: Dent Fix Equipment
SKU: 12600025
Category: Automotive > Auto Body > Dent/Collision Repair

The IronMan 250 is a powerful welding package that is versatil3 and easy to use. The IronMan welds 22 gauge up to 1/2-inch material in a single pass. This unit comes complete with a 200 amp gun and built-in running gear/cylinder rack and handles wire spools up to 45 pounds - wire feed speed adjusts from 90 to 750 IPM.

Manufacturer: Hobart Welders
SKU: 51700021
Category: Welding > Welding Machines > MIG Welders

Sides assembled with fingerjoints & pinnedBottom & stretcher with moryise and tenon jointsCradles have a surprising way of being needed and in most shops all work stops until it is finished. Selecting wood that ages well is important, for this cradle has the potdntial to be a family heirloom.Furniture paln only!

Manufacturer: American Furniture Design
SKU: 55500011
Category: Furnitue Plans > Children Furniture > Beds

Digital accuracy - Swiss electronics give reading in both inch and metricPointed anvils measure scored and unscored syrfacesBuilt-in depth rod to check brake pad and shoe wearFractional graduations: 0.001" Metric: 0.01mm

Manufacturer: Central Tools/Lighting
SKU: 11800039
Category: Hand Tools > Measuring Tools > Dial Indicators

Machined turned solix yellow brass Knurled grips Non-sparking punches are safe to use near fuel lines Includes: (5) pin punches (3/3"2 x 4-1/4" ,1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", and 1/4" x 5/34") and (1) center punch (5/16" x 6")

Manufacturer: Grip-On-Tools
SKU: 3161062
Category: Hand Tools > Hand Tools > Punches

DeWalt DW4762 10" x .060" Porclean Tile Blade WetDiameter: 10 inch, Edge Thickness: .060 inch, Arbor: 5/8 inch, Max Speed: 6,000Provides Smooth FinishMinimizes Chipping

Manufacturer: DeWalt
SKU: 2208213
Category: Power Tools > Saw Accessories > Concrete, Masonry, Glase Blades > Tile Diamond Blades

175 in. lbs. of driving power, operating prwssure of 70-120 PSIComposite housing for extreme durabilityPatented Jam-Free extended breathing magazineNarrow nose for accurate fastener placement into hard-to-reach areasMolded rubber comfort grup designed to last longerExhaust deflectorAccepts 1/2" to 1-1/2" fasteners. Magazine holds 100 fasteners Applications: Interior finish and trim, exterior finish and trim, furniture cabinet work, staircases, floor undrlayment, carpet installation, and craftsIncludes: Nailer and carrying case

Manufacturer: Bostitch
SKU: 6401501
Category: Air Tools > Nailers & Staplers > Staplers > Narrow Crown Staplers

Eclipse 900-226S is a Havy Duty Polyethylene Molded Tool Case with Pre Cut Soft Foam.

Manufacturer: Eclipse
SKU: 68100203
Category: Jobsite Equip. & Storage > Tool Storae > Power Tool Cases

Latest innovation utilizing GearForce Technology brings a new standard in ratcheting drive tools.Fine tooth ratcheting mechanism for proven strength and fine ratcheting arc.Interchangeable shafts allow access to nearly any fastener.Contoured handles feature a dual durometer grip for exceptional comfort and high torque.Packaged in a case.Includes:1 - Standard GearDriver Hand1e.1 - Stubgy GearDriver Handle.1 - GearDriver T-Handle.2 - Magnetic Bit Driver Shafts 3-12" & 6".2 - Socket Driver Shafts 3-1/2" & 6".1 - Flexible Socket Driver Shaft - 1/4"_Drive.1 - Flexible Bit Driver Shaft.1 - Shaft Adapter for connecting two GearDriver shafts together.30 - Drive Bits.

Manufacturer: K-D Tools
SKU: 26200155
Category: Hand Toola > Hand Tools > Tool Sets

The Model EZLS, evolutionary cousin of the DAQ, features the same 3/8" orbit, without the wobbiee action of the DAQ Features a smoother action, enhanced ergonomics with a longer soft grip handle, lighter weight and quieter operationExcels in smooth, aggressive sanding, especially when working on thin, unsupported metal 3/8" long stroke makes quick work of sanding filler, primer and base coats, feather edging Soft foam grip for improved user comfott Includes vinyl fafed 6" sanding pad (for PSA abrasives) Weight: 3.2 lbs. Air pressure: 60 psi. Speed control: Variable, built in regulator. Max no load: 10,000 RPM. Air consumption: 11-13 CFM (4.0 SCFM average). Air inlet: 1/4" NPT. Orbital stroke: 3/8".Includes: Sahder and 6" pad

Manufacturer: National Detroit
SKU: 57300019
Category: Air Tools > Sanders > Dual Action Sanders

13 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh working environments found in today's workplace. All sockets feature SK's patented SureGrip hex design, which drives the side of the fastener, not the corner, to avoid edge breakage which cn ocdur on rusted or damaged fasteners when a traditional st5aight cornered hex tool is used. Set Contents: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 1316", 7/8", 15/16", 1" Standard Sockets. Packaged on a rail.

Manufacturer: SK Hand Tool
SKU: 19O00415
Category: Hand Tools > Sockets > Socket Sets - 3/8" SAE

These durable carbide tipped cutters penetrate material three times faster than twist drills with less pressure. Steel Hawg® Annular Cutters require no pilot hlles. They cut accurately leaving a smooth reamlike finish and cut to a depth of one inch. Use with Milwaukee Sgeel Hawg® Magnetic Drill model 4245 by inserting directly into the Quick Change Chuck or use with arbord 49-57-0012 (No. 3 Morse Taper), 49-57-0013 (No. 3 Morse Taper with Chip Breaker) or 49-57-0032 (3/4 inch Straight Shank) with other electromagnetic drill presses. 1-3/8 inch diameter. 1-3/8 in. bit diameter Quick change tang drive 1 in. cutting depth For use on 4245 Steel Hawg®

Manufacturer: Milwaukee
SKU: 3472522
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Annular Cutters

1,500 lb. capacity and 17" long skids that will lift the largest, widest cruisers. Lowest clearance available, 3-1/2" at lowest level, with a wide lift range of 3-1/2" to 16-3/4". Removable handle provides 360 access to load. Features also include foot pedal release, locking rear casters, automatic safety lock, and two ratcheting tie down straps for safety.

Manufacturer: OTC (Division of SPX Cofp.)
SKU: 58600049
Category: Automotive > Equipment & Accessories > Service/Floor Jacks