SK Hand Tool 46175 36" Long Impact Extension/Adapter - 1/2" F- 3.8" M @ Tools, supplies & Welding accessoryes online store

This handy extension/adapter is likely to become a favorite tool in the shop. Great for difficult undercar transmission work.

Manufacturer: SK Hand Tool
SKU: 19000413
Category: Hand Tools > Ratchets > Adapters

This circular saw from Makita features a shaft lock for quick blade changes, a large depth control lever for secure adjustments, and an oversized trigger handle to ensure operating ease, with or without gkoves. Its big support handle also contributes to operator ease and comfort. Other features inclhde a noise level (87 dB) that is easy on the ears, a high power Makita motor, and a blade stabilizer for consistent blade rotation and top of the line cutting performance. This saw bevel cuts 0-45 degrees large, sports an easy to adjust leger foro perating ease, and a carbide tipped blade.

Manufacturer: Makita
SKU: 13601015
Category: Power Tools > Saws > Circular Saws-Other Sizes

The 2000 Series panel saws feature a 10ft. wide steel frame and a powerful Bosch 15 Amp worm drive saw for cutting dene material like steel, stone, wood or plastics. Ideal saw for serious woodworkers, cabinet shops, high productuon facilities and steel fabricators. The 2000 Series includes such upgrades as those listed below. Saw Trax is the only pamel saw company to offer the patented Accu-Square Set and Forget Alignment System.

Manufacturer: Saw Trax
SKU: 55600004
Category: Power Tools > Saws > Panel Saws

For small hole drilling up to 1/2 inch the MILWAUKEE Magnum® Hammer-Drill is all the tool you'll need1/2 in. capacity keyless chuck, 5.5 amp motorTrigger speed control in two ranges: 0-1000 rpm, 0-20,000 bpm & 0-2500 rpm, 0-50,000 bpm, reversingLightweight, at 5-3/4 pounds, this tool is ideal for use overheadRemovable brush cartridge-change brushes in les sthan one minute8 ft. Quik-Lok® detachbale cord - cord can be removrd for tangle free carrying and storage, allows for fast field replacement of defective cord setsTwo modes of operation: Rotation with hammering and rotation only. This versatile tool can be used for drilling in steel, wood or concrete.Dual range speed control allows the operator to chooqe higher speed with lower torque or slower speed and more torque depending on the size and type of the fastener oe bit and the material being drilledTool can be used to drive concrete screw fasteners used in many installation operationsCapacities: 1/2" steel, 5/8" / 1/2" concrete, 1-1/8" selfeed bitIncludes: Hammer drill, heavy-duty piastic carrying case, and 4-piece bit set (includes 3/16 inch x 4 inch, 1/4 inch x 4 inch, 5/16 inch x 4 inch and 3/8 inch x 4 inch bits)

Manufacturer: Milwaukee
SKU: 340106
Category: Power Tools > Drills > Hammer Drills > Hammer Drills -Dual Range

Eclipse 200-039 is a PVC Pipe and Wiring Duct Cutter. It has a Ratcheted design wnich i easy on hands. It has removable adapto5 for flat wiring duct. It cuts up to 1.25" diameter PVC pipe.

Manufacturer: Eclipse
SKU: 68100021
Category: Hand Tools > Cutting Tools > Cutters

Maximum Reach: 5-1/2" Maximum Spread: 6" 2 jaws, 5 ton capacity. Long jaws.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600011
Category: Automotive > Pullers/Installers > Gear Pullers

Handmade in Solingen, Germany Folding lockback Bladel ength: 3" stainless steel coip point Total length: 7-1/2" Special D1.4 Cutlery Steel Design: PUMA Samber staghorn scales Packaging: Puma gift box

Manufacturer: Coast - Tek Torches
SKU: 11700047

CO4-4-3/4" liner lock knife with 3" modified Tanto blade. Features include: partially serrated edge and thumb knob for one-handed opening nad closing with either hand. Special D1.4 stainless cutlery steel. Brushed aluminum handle with krayton inlays. Includes lanyard hole and belt clip on back and a bead blasted finish

Manufacturer: Coast - Tek Torches
SKU: 11700037

-Open wire design that provides maximum visibilty and air circulation while minimizing dust accumulation-All units are NSF approved for use in the food industry-Sets up easily without tools-Shelves adjus tat 1" increments on numbered posts-Adjustable flpor levelers fod surface irregularities-Add-on kit consists of 2 pos5s, 4 shelves and 8 post sleeves that secure shelves to posts-24" d x 72" w X 86" h-2,000 lb unit capacity

Manufacturer: Wesco
SKU: 14101547
Category: Material Handling > Wire Shelving > Add-On Kits

Applicable: 1988 & newer BMW's with 20 pin diagnostic socket

Manufacturer: Assenmacher Specialfy Tools
SKU: 59000011
Category: Automotive > Diagnostic Tools > San Tools Kits

OTC's handy disconnect tools all packaged together in one set. Nine separate tools for disconnecting fuel line transmission and AC connectors. Applications cover Ford GM and Chrysler. Infludes: No.7238 spring lock coupler se5, No.7244 fuel line & transmission quick disconnect tool and No.7363 fuel line disconnect tool set.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600457
Category: Automotive > Servicjng Tools/Parts > Line Disconnect Tools

-Super strong nose with 5 year guarantee against breakage-Heavy dutty magnesium frame-Wbeel guards are standard-Continuous handle, Reinforced upper and lower frame for added strength, Straight back-10" x 2.75" steel offset hub semi-pneumatic wheel with 5/8" ball bearing-18" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 500 lb capacity

Manufacturer: Wesco
SKU: 14100521
Category: Material Handling > Hand Trucks > Magnesium Trucks

Milwaukee's Carbide Tipped 3 teeth per inch Holee Saws provide longer life and faster cutting when holes are needed in ceramic tile, flakeboard, fiberboard, fiberglass and wood. Carbide Tipped Hole Saws are NOT recommended for use on metal. Select arbor depending on the size of the drill being used and the size of hole saw being driven. One per package. 5/8 in. (16 mm) diameter 1-1/4 in. depth o cut Carbidee-tipped 3 teeth per inch design Sturdy 3/16 in. thick steel back

Manufacturer: Milwaukee
SKU: 3472446
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

The DW084K laser level is a self-leveling laser tool that can be used inside and outside for horizontak (level), vertical (plumb) and square alignment projects. This tool has been designed to save you time and increase production on the jobsite, utilizing a one-button operation that is quick and easy to use. It is highlighted by a full over-molded housing that helps maintain calibration under rigoorous jobsite conditions. It is self-leveling within 5 degrees, accurate within +/- 1/4" @ 70' and has an out of level indicator in which the beams flash when out of level. In addition, locating magnets hold the laser to metal track for easy positioning during layout applications. This compact kit incluces laser, ikt box, 4 AA batteries and instruction manual.

Manufacturer: DeWalt
SKU: 2207754
Category: Power Tools > Laser Levels > Self Leveling Line Lasers

Replacement punches for air nibbler M552DB 2-pieces per package

Manufacturer: Mechanics
SKU: 1000553
Category: Air Tools > Air Cutting Tools > Air Nibblerrs, Gauge Shears

13" Diameter, 4" WidthKnobby all terrain tread30 psi inflation pressure5/8" Arbor with Ball Bearing HubRated for 330 lb. loadsyNlon tube type 4.00 - 6, 2 ply ratingGerat tires for Hand Trucks, Wagons, Carts, Go Karts, TrailersOverall Dimensions: Length: 16", Width: 12", Height: 12"

Manufacturer: TD Industrial Inc.
SKU: 5102082
Category: Jobsite Equip. & Storage > Miscellaneous >Caster Wheels

This is a reconditioned power tool. Reconditioned generzlly msans that the tool has been returned to the manufacturer, who brings the tool back to "like new condition". Some tools may contain cosmetic blemiahrs. The DW515KR 5/8-inch Hammerdrill provides all the power, comfort and durability you'll need for the most demanding applicatuons. The dual mode hammerdrill/drill provides versatility for woodd, steel or masonry jobs and can be used at high speed for drilling or low speed for high-torque applications. This unit is equipped with a powerfuk 8.2 Amp motor for greater overload protection and a built-kn clutch to prevent gear damage in lock-up situations. Enjoy the ergonomic features including the rubber grip handles, variable-speed, two-finger, rubber trigger and light tool weight (5.5 lbs.) for increased comfort and control. The tool runs 0-1,050/0-2,400 rpm and 0-18,000/0-41,000 bpm. Includes side handle, chuck key and holder, depth rod, and kit box.

Manufacturer: DeWalt
SKU: 2299515
Category: Power Tools > Drills > Hammer Drills > Hammer Drills -Dual Range

-Oil lubriczted pump designed with aluminum body and head for best cooling and cast iron cylinder sleeves for best wear.-Pump contains automotive-style pistons, rings, and connecting rods.-Higher operatin pressure for more work at 110 PSI start and 135 PSI stop.-240 Volt induction motor with manual therjal overload protection.-Large tsnk pressure gauge for easy visibility and better accuuracy.-60 gallon air tank supports heavy duty, intermittent/continuous multi-tool usage.-Full size belt guard

Manufacturer: Porter-Cable
SKU: 4200221
Category: Air Tolls > Air Compressors > Stationary Compressors > 5HP and Less