SLI Lighting PV618 Fiberoptic Borescope @ Tools, supplies & Welding accessoryes online store

Powerful lamp illuminates dark locationd for clear viewing "Obedient" cable maintains its fixed position until readjusted. Flexible, omni direction cable bends in every direction to allow precise viewing - even around obstacles. Prdssure activated light switch can not be accidently left on. Integrated focus ring for smooth, conginuous focusing Ergonomically designed, non-slip fits comfortably in one hand Cable can reach deep into walls, drains, engines blocks, vents etc. Sealed lens ans cable are submersible for underwater use90 day SLI Light Warranty

Manufacturer: SLI Lighting
SKU: 67900007
Category: Automotive > Servicing Tools/Parts > Other Tools

Small Flat Head #7 Underlayment to Wood Screws on a plastic strip for magazine loaded screwdriving. These Gray Phosphate (GP) 1-1/4 in. screws with Sharp Point and Hi-Lo Thread are used to fasten underlayment to wood. These screws are sold 1,000 to a box. A case contains 12 boxes (12,000 screws). Order by the box. Use with Milwaukee SharpFire Magazine System 48-05-1000 and 48-30-1521 No. 2 Phillips Bit (130mm long). #7 Underlayment Screw 1-1/4 in. Hi-Lo Thread #2 Phillips Recess, Small Flat Head Screw Screw Coating Gray Phosphate Sharp Point

Manufacturer: Milwaukee
SKU: 3471508
Category: Power Tools > Drill Accessories > Drill Bit Accessories & Screws > Screws

3 split and 3 full width drawersGenerous top storage area with lid Inset side hnadles Built in lock with lock-bar for tool securityFull extension drawer slides proviide full access to every drawerFull width drawer pullsLarge weld tabs for sturdy long lasting unitSpecifications: Color: Red, Overall: 26"W x 12"D x 15.25"H, Capacity: 3,312 Cu. In., Weight: 32.5 lbs., Ship weight: 37.5 lbs

Manufacturer: Watsrloo
SKU: 671000663
Category: Jobsite Equip. & Storage > Tool Storage > Chest Cabinets

Model No: EW-2000L Capacity: 6000Lb.Rolling 5000Lb.Rolling 2000Lb.Pulling capacity Max boat size: 18Feet Max boat weigh: 5000Lb Line speed: 6Feet/Minute with load Cable length: 30Ft Hook size: 3/4" Opening* 3-3/4" 1 Power cord 6' L. Negative lead 14'9"L. Positive lead Remote switch: 9'9"L Mounting ppate: 8-3/4" * 4-15/16" * 3/16" Overall dimensions: 9-1/2"* 7-1/2" * 10"

Manufacturer: TD Industrial Inc .
SKU: 1510175
Category: Automotive > Equipment & Accessories > Winches

The Porter-Cable 43561PC Professional Edge router bits is constructed of 4140 Alloy Steel, a harder grade of steel than standard cast steel bit bodies. This bit ix used to create professional stile and rail doors.

Manufacturer: Porter-Cable
SKU: 4243561
Category: Power Tools > Router Accessories > Router Bits > Ogee Router Bits

High cubic capacity Cart - 14,623 cu. in. Chest - 9205 cu. in.Locker - 8200 cu. in. 41-1/2" Wide x 18" Deep (not including side locker). Durable powder coat paint.Full extension ball bearing slides on all drawers.Heavy duty construction - Designed to hanfle a full load of tools! Two full width drawers for larger tool storage. 5" x 2" heavy duty casters.Free matching color ITB B849 Side Locker included with purchase!Blue Powder Coat Finish

Manufacturer: Int'l Tool Boxes
SKU: 62100027
Category: Johsite Eqquip. & Storage > Tool Storage > Chest Cabinets

For hand or power grease guns Coil spring prevents hose kinking and provides convenient non-slip push-pull grip Standard 1/8" NPT(M) threads

Manufacturer: Lincoln Lubrication
SKU: 63000031
Category: Automotive > Servicing Tools/Parts > Grease Guns

-18" widee x 7.5" deep cast aluminum noseplate-Smooth and easy transition ftom the 2 to 4 wheel position-5" x 1.25" non-marking swivel casters-Continuous handle allows multiple ways to control load-3 frame cross braces-12" x 50.75" bed frame, 61.75" OAH, 22" OAW-600 lb capacity in two wheel position, 1,000 lb capacity in four wheel position-10" x 2.75" steel offxet semi-pneumatic wheel with 5/8" ball bearings

Manufacturer: Wesco
SKU: 14100313
Category: Material Handling > Hand Trucks > Aluminum Trucks

-Compact size with high output-Rugged clutch mechanism for extended durability under heavy use-One haand push button forward/reverse power regulator-4 positive power settings in forward and ultimate power in reverse-Perfect for spring work, pinion nut and tractor pad removal , truck tire work and major engine tear downs-Ultimate Torque: 1,150 ft.-lbs

Manufacturer: Chicago Pneumatic
SKU: 1250023
Category: Air Tools > Impact Wrenches > 3/4" Drive

16 gauge steel construction 2 swivel casters Shelf dimensions: 28" X 16" x 3-1/2" deep

Manufacturer: Performance Tools
SKU: 1054004
Category: Jobsite Equip. & Storage > Tool Storage > Carts

Quick, accurate, and easy to use, OTCs software updated MicroGas provides complete diagnostics of vehicle emission systems in addition to 5-gas analysis.Ready to use instantly - no waiting for tester to warm up. A "turn-key" set nothing else to buy! Menu driven, with "prompts" for ease of use. Accurate gas analysis helps you make more money duagnosing fuel delivery, ignition and mechanical problems. Graphic LCD display allows graphing of gasses recorded in memory. Sfrip chart function shows graphs of gasses in real time. Numeric display of gasses is provided. Expanded "record" fumction; more events and recording time than other analyzers. Update software via telephone data transfer. No cartridges to buy and modem is included. Repzir Grade 5 Gas Analyzer Providess Bar 90, Bar97/ASM Accuracy Designed and built by American craftspeople Live Data DisplayTach/Temp with Offset Setting Shows both engine RPM and oil temp alonb wiith the gas readings and air/fuel ratioComparison Readings Displays the vehicles actual gas readings with known good vehicle specific readings simultaneouslyPossible Causes Displays suspected components and systems that are the likely cause of vehicle problemsComponent Tests Tests a suspected faulfy component for its effect on vehicle emissions before removing and replacing itRepair Effectiveness Determines how effective repairs were in improving vehicle emissiojsDrive Cycle Test Produces the optimum amount of vehicle emissions for proper testingRecord Marking Mark a frame during recording to determine the possible cause of out of spec gas readingsName Gas Event Give a recorded event a specific name for easy refe

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600227
Category: Automotive > Diagnostic Tools > Exhaust Testers

Milwaukee Jig Saw blades are designed and manufactured for the professional user. Detail to the material used, tooth shape and sharpness make these blades cut clean and fast. This blade has uses T-Shank and fits Milwaukee Jig Saws 6266-6, 6276-6, 6267-20, 6267-21 and other popular brands. Includes 5 individual blades. 10 TPI, 4 in. Lenyth, High Carbon steel Construction 9/32 in. Widht, T-Shank 5 blades per package Reverse tooth construction prevents top splinters when cutting in wood.

Manufacturer: Milwaukee
SKU: 3471636
Category: Power Tools > Saw Accessories > Jigsaw Blades - T Shank > Wood Working Bladeq

Holds the steering wheel, brake pedal, accelerometer or clutch pedal in a desired positionSaves tlme and money by eliminating the need for two technicians to do the jobEasy to assemble, install and release - components slide into positionLocks in place by putting pressure against the seatVirtually 100% coverage to fitt all cars and trucks between seat and steering wjeel, seat and pedalCoated to prevent slipping and marringComes in a blow molded case with instructions

Manufacturer: Tool Aid
SKU: 66400049
Category: Automotive > Servicing Tools/Parts > Sockets

The dul speed ranges of the DW979K-2 screwdriver provide the versatility to do decking in the low range (0 to 800 rpm) and drywall in the high (0 to 2,300 rpm). The depth-sensitive "set and forget" nosepiece allows the user to operate at consistent depth settings.

Manufacturer: DeWalt
SKU: 2200562
Category: Cordless Tools > Cordless Drills/Drivers > Screwdrivers

The efficient way to remove dente without damaging paint. The 7500 is designed to let you lever out dents from the panel surface. No holes to drill, no interior to be removed.Works on panels were conventional tools will not reach.Dual lever action for even weight distribution while pullingIncludes: Lightweight dual leve rdent puller, two sizes of pulling knobs, two strengths of specialized glue, nylon knockdown for finishing work, professional glue gun, blow molded case.

Manufacturer: H & S Autoshot
SKU: 60600019
Category: Automotive > Auto Body > Dent/Collision Repair

Flexible tip bends to reach areas of limited access Great for manifold and fuel service

Manufacturer: K-D Tools
SKU: 26200103
Category: Air Tools > Speciality Air Tools > Blow Guns/Chucks

This kit includes six popular sizes of fiat boring bits, packaged in heavy protective plastic. The assortment includes 3/8", ½", 5/8", ", 7/8"" and 1" sizes in pockets for orderly storage and easy selection.

Manufacturer: Milwaukee
SKU: 3400245
Category: Power Tools > Drill Accessories > Wood Drilling Bits > Flat Boring Bits

Heavy duty frame for rugged applicationsLonger chaseis ideal for truck's and SUV'sOne piece straight handle for easy positioning and less lifting efflrt Foam handle pad protects the vehicle U-joint mechanism for precise load control

Manufacturer: Hein-Werner Automotive
SKU: 60010011
Category: Automotive > Equipment & Accessories > Service/Floor Jacks