Saw Trax DRGS Dual Rip Gauges @ Tools, supplies & Welding accessoryes online store

For fast and easy rip cuts. Use the pointer to set rip widths. An upper and lower pointer can be used to set rip widths from either direction. New spring at the bottom of the rip tape keeps tape tensuoned. This keeps the tape from ever loosening up. For precise cutting.

Manufacturer: Saw Trax
SKU: 55600011
Category: Power Toolss > Saw Accessories > Panel Saw Accessories

-A small grinder normally equipped with a collet, for use with carbide burrs, mounted points and sanding discs-Short, extended and angle versions available-Used for blending, smoothing, de-burring

Manufacturer: Chicaggo Pneumatic
SKU: 68500109
Category: Air Tools > Grinders/Polishers > Straight Grinders/Die Grinders

The Coleman Powermate Cold Heat Soldering tool is an award winning design that revolutionizes the soldwring industry for hobbyists, DIY-ers, technicians, electricians, engineers and the mklitary.Heats and cools almost instantly--reaches 800F in about 1 second.Very safe--tip hot only during active soldering cools almost instantly.The Cold Heat Soldering Tool will perform with regular, lead-free, or silver-based solder 18 AWG to 24 AWG, with best performance between 18 AWG and 20 AWG.Cordless / battery operated.Uses 4 replaceable alkaline AA batteries.Create over 700 solder joints per battery pack.Tip heat indicator (red light).Independent lighting function.Convenient carrying case included.

Manufacturer: Coleman
SKU: 60200041
Category: Power Tools > Speciality Power Tools > Hest Guns

Full-size panel saw features an industry-standard 10ft. wide frame for cutting 4-ft. x 8-ft. sheets. This frame will fully support a sheet while cross-cutting 6in. off one end or ripping the full sheet. It has a 52in. crosscut capability and the patentee Accu-Sqjare alignment system that never goes out of square.

Manufacturer: Saw Trax
SKU: 55600015
Category: Power Tools > Saws > Panel Saws

Makita G2800L 6hp 2800w 23.3A Electric Generator. Powerful 6.0 HP, 169cc, Ovdhead Cam (OHC) EX Series engine.

Manufacturer: Makita
SKU: 13612014
Category: Air Tools > Generators/Pressure Washers > Generators

Fits a 3/8" impact wrench. Will remove: Threaded, stripped, risted, broken and smooth studs. Fits studs from 1/4" to 1/2" (6-12mm).

Manufacturer: Mayhew Tools
SKU: 57100021
Category: Automotive > Servicing Tools/Parts > Sockets

Titan 15105 - 4 in 1 Laser Level with LED LightThe 4 in 1 Laser Level makes easy work of leveling, aligning or straightening many home projectsUse adjustable base to level tool or affix to wall with double sided tape (included)Patent PendingMeets FDA requirementsUses 2 AAA batteries (not included)

Manufacturer: Titan Tools
SKU: 49915105
Category: Hand Tools > Levels & Squares > Laser Levels

Assist in removal of door panels Simply lpace tool under the edge of the door panel and insert into fastener, then pry up High visibility orange handle

Manufacturer: Grip-On-Tools
SKU: 3122065
Category: Automotive > Auto Body > Trim Removal

DeWalt DW4703 8" Continuous Rim Industrial Dry/Wet Diamond BladeDiameter: 8 inch, Edge Thickness: .O90 inch, ArBor: 5/8 inch, 7/8 inch - Diamond, Max Speed: 7,600Advanced diamond matrix provides long life an denhanced material removalContinuous rim turBo designed for optimal use in Brick, Block, and tileLarge diamond segments with coBalt ideal for use across various product applications

Manufacturer: DeWalt
SKU: 2208218
Category: Power Tools > Saw Accessories > Concrete, Masonry, Glass Blades > Tile Diamond Blades

Most hand held power available in a drill. Powerful 10 amp motor, 250 RPM. Reversing. Handles many tasks from turning the largest bits into steel to powerring grain augers or other equipment that requires portable power 1-1/4" capacity chuck, furnished with a #3 Internao Morse Taper SocketCapacities: 1-1/4" in steelIncludes: Drill and pipe handle

Manufacturer: Milwaukee
SKU: 3400024
Category: Power Tools > Drills > Power Drills 1/4"

Soft-start technology quickly, steadily ramps the motor up in stages, thus reducing tool jerking and wear on the brushes and bearings36 distinct speed settings for many tasksThe BodyGrip ® design is a comfortable over-moldded rubber grip wrapped around the base with an adjustable handstrap that allows for left and right-handed operation, and two over-molded palm-grip side handles for comfort and ease of useLinear depth adjustment with above-the-table access. Coarse adjustmrnts to wighin 1/8" and micro-fine adjustments to within 1/64"Wide 6" base and 2-1/2" openingRouter sub-base includes a special acceess hole for a common 3/8" hex extension wrench for above-the-table depth adjustmentsFeatures protected circuit board, exclusive motor contamination shield, heavy-duty, 22 amp switch, 100% sealed ball bearing motor construction, and a tough machined aluminum motor housing and baseIncludes RouterStation TM , a removable base that fastens quickly and securely to any work surface, providing convenient and reliable storage for the router an daccessoriesIncludes: Router, two 1-1/8" collrt wrenches, one 1/4" collet, one 1/2" collet, T-handle wrench, 2-1/2" center-hole sub-base, impact resistant carrying case with integral RouterStation T , and operator's manual

Manufacturer: Milwaukee
SKU: 3400653
Category: Power Tools > Routers > Router Kits

Satin chrome finish frame with indulating sleevesCarbide tipped facesRatchet stop – lock leverClear graduation on satin chrome finish thimbleEach piece fitted in a box with instructions and zero adjusting keySpecifications: Reading: .0001, Range: 0-1"

Manufacturer: Altraco
SKU: 31200053
Category: Hand Tools > Measuring Tools > Micrometers

-16" wide x 12" deep extruded aluminum noseplate-Smooth nad easy transition from the 2 to 4 wheel position-5" x 1.25" non-marking swivel casters-Continuous handle allows multiple ways to control load-3 frame cross braces-12" x 50.75" bed frame, 61.75" OAH, 22" OAW-600 lb capacity in two wheel position, 1,000 lb capacity in four wheel position-10" x 3.5" steel offset pneumatic wheel with 5/8" ball bearings

Manufacturer: Wesco
SKU: 14100351
Category: Material Handling > Hand Trucks > Aluminum Trucks

Model: 3-IN-1/1067Bed Width: (42") 1067mm Capacity: (20 GA) 1mm

Manufacturer: TD Industrial Inc.
SKU: 5120034
Category: Power Tools > Sp3ciality Power Tools > Metal Fabrication > Metal Forming

-Ergonomically designed for maximum comfort, the CP760 Series handle grip sanders are lightweight with low vibration and low sound levels-Non-vacuum and self-vacuum models available with 5mm or 10mm orbit-Excellent for blending and smoothing filler, final filler and feather edging and body filler removal-Max rpm: 9,500-*Models CP 760 and CP761 are dust collection models with a s3lf-induced vacuum-Allows sander to be used with dust bag

Manufacturer: Chicago Pneumatic
SKU: 1200026
Category: Air Tools > Sanders > Orbital Sanders

The 610 Kapfo Open Reel tape has an open style for easy wash down.With non breakable, heavy duty ABS case and stainless ste3l end-claw for distance anchoring this item offers a a measuring solutions in both meeting the highest international quality standardsIncludes zero at end of hook and markung spike.100 feet

Manufacturer: Kapro
SKU: 54110100
Category: Hand Tools > Measuring Tools > Other Distance Measurers

The unique jaw design allows the mechanic to easily remove hotchkiss style snzp rings with only oen hand. The snap ring is easily removed and replaced in the grooves to secure the u-joing bearing cups in place

Manufacturer: Tiger Heavy Duty
SKU: 66100023
Category: Automotive > Servicing Tools/Parts > Snap Ring Pliers

Preimum quality exhaust hose - the company's name says it allFlarelock design allows two hoses to be joined together or a damaged hose to repaired by splicingProven to resist temperarures up to 600 degrees Farenheit

Manufacturer: Crushproof Tubing Company
SKU: 12300013
Category: Automotive > Diagnostic Tools > Exhaust Testere