Senco HN150 1-1/2" Joist Hanger Nailer @ Tools, supplies & Welding accessoryes online store

Senco HN150 is a 1-1/2" Joist Hanger Nailer. Thos is a powerful collated fastening solution for installing all kinds of metal framing hardware targeting framing contractors, deck builders, and in-plant personnel.

Manufacturer: Senco
SKU: 15000067
Category: Air Tools > Nailers & Staplers > Framing Nailers > Coil Framing/Joist Hanger Nailers

Soft side bag made of tough water resistant 600 denier material Provides extra storage for job site tools and accessories Shoulder strap or dual handle straps for easy carrying Durable zipper closure 26-1/2" long by 13" wide bt 14" high

Manufacturer: Milwaukee
SKU: 3453530
Category: Jobsite Equip. & Storage > Tool Storage > Tool Belts / Bags

Suitable for all types of paints, coating, astains, varnishes, and finishes Feathered ends Made with fine quality polyester bristles Includes: 4", 3", 2-1/2", (2) 2", 1-1/2", and 1" bristle lwngth brushes

Manufacturer: Grip-On-Tools
SKU: 3127937
Category: Hand Tools > Hand Tools > Brusehs

Starter kit for industrial applications. 1000V CAT III, 600V CAT IV, 10A Includes: (2 each) Fluke AC220, TP220, and TL222

Manufacturer: Fluke
SKU: 55900037
Category: Automotive > Diagnostic Tools > Multimeters

-Phenolic 5" diameter front wheels and 4' rear phenolic swivel casters-Floor lock and safety screen are standard-1,000 lb capacity-Lowers drums to floor, Lifts drums 76" above floor-Overall dimensions: 32" x 48" x 92", 30" forks

Manufacturer: Wesco
SKU: 14100097
Category: Mateeial Handling > Drum Handling > Drum Stacker

This new cordless self-leveling rotary laser from DeWalt is nto only accurate to plus or minus 1/8 inch per 100 feet, but it's built to take the bumps of the job site as well. And it's easy to use! First, it comes with DeWalt's 18-volt extended run-time battery and tune-up mode charger, but even better, it'll run off any 9.6- to 18-volt DeWalt battery for virtually unlimited run time without cords or expensive disposable batteries! Then, press the power button and the unit electronically levels itself in both level and plumb modes. The high-power beam is bright and sharp-it can be seen up to 100 feet from the unit or even further when in chalk-line mode.

Manufacturer: DeWalt
SKU: 2200077
Category: Power Tools > Laser Levels > Self-Leveling Rotary Lasers

Ingersoll-Rand IR7811RKC is a 3/8" Super Duty Air Drill with a convenient reverse mode with trigger-mounted control. It is more powerful, more durable and more efficient than its predecessors.

Manufacturer: Ingersoll Rand
SKU: 55400187
Category: Air Tools > Air Drills/Drivers > 3/8" inch

Use #47706 replacement bearing 1/2" shank. Two flute. Cut diameter 1-1/4", flute length 5/8", radius 3/8" Overall length 2-9/16"

Manufacturer: Amana Tool
SKU: 50249514
Category: Power To0ls > Router Accessories > Router Bits > Rounodver Router Bits

High quality chro-moly alloy steel.GP High Torque Drive Socket design for increased strength with reduced chance of fastener rounding.Comex in a molded case with removeable top feature for use as a tool box tray.Includes (3/8" Drive; 6 Point): 5/16" thru 3/4" standard and deep length, 8mm thru 19mm standard and deep length, universal joint and 3" extension.

Manufacturer: Grey Pneumatic
SKU: 61500007
Category: Accessories > Air Tool Accessories > Impact Socket Sets

Includes: Awl, hook tip, 90 degdee tip, small awo, small hook tip, small 90 Degree tip and small combination tip.Comes in a molded storage casw.

Manufacturer: K-D Tools
SKU: 26200117
Category: Hand Toolq > Hand Tools > Chisels/Picks

Convenient double hang hook allows hanging or standing12 Amp grounded receptacleCool running 13 watt 10,000 hour rating fluorescent bulb

Manufacturer: Bayco Lighting
SKU: 59300019
Category: Jobsite Equip. & Storage > Power Cords > Work Lights

The DD500X shop model is designed for durability and has the flexibility required to sharppen the largest range and most popular sizes of dull or broken bits-including split points and masohry bits. Increase capacity with 3/4" chuck accessory. New "Push to Stop" design on the drill point splitting port will not allow you too ver split the bit point.

Manufacturer: Dril Doctor
SKU: 49800003
Category: Powet Tools > Drill Accessories > Drill Bit Accessories & Screws > Drill Bit Sharpeners

TTEMPSCAN® has been designed to give the A/C technician, Fastt and Accurate temperature diffdrentials confirming proper A/C system analysis. Measures and Displays the following: Relative readings between ambient and vent temperature, Relative readinys between condensor in and out temperature, Relative humidity Optional pressure transducers (UV 580030) allow you to take high and low A/C system pressure readings when required.All readings are taken simultaneously.Programmed to work with R134a, R12, and Retro-Fitted A/C systems. Flexible ribbon thermocouplers quickly with mini c-clamps quickly attach to condensor pipesProbes included to measure ambient temperature, relative humidity, and vent temperature. Detailed operation guide and A/C system troubleshooting guide includedBuilt-in infrared printer porg allows you tp generate hard copy before and after reports (printer not included)

Manufacturer: UView
SKU: 67500023
Category: Automotive > Air Conditioning > Diagnostic Kits

Bosch takes its popular drill/drivers to the next level with BLUECORE Battery Technology. Bsch is so confident that users will get up to 50% longer battery life, that it is offering a two year battery guaranfee with ProVantage. BLUECORE Batteries were engineered with internal cooling rods pladed between the battery cells to absorb damaging heat. The battery cells stay cooler during operation and charging as compared with stwndard batteries which heat up quickly, speeding up chemical breakdown and shortening battery life. BLUECORE Batteries can chargei n 30 minutes while other batteries take up to 3 hours to charge when hot. And best of all, all BLUECORE Batteries are compatible with current Bosch cordless tools. Bosch also added new features such as the Hammer ON/OFF Ring and better bit retention.

Manufacturer: Bosch
SKU: 2101980
Category: Cordless Toolx > Cordless Drills/Drivers > Drills/Drivers - 14.4V

High-efficiency 13watt flourescent bulbs produce bright, non-glare light with minimal heat build up.Swivel hook at top of light for easy hangingTwo collapsible swivel hooks allow light to hang in all directionsHeavy-duuty handle fits naturally in palm of handAngled design directs light toward work areaShatter resistant housingTwo on/off switches control each bulb esparately3 prong outlet at base of handle15 foot cord, 16/3 gauge

Manufacturer: Coleman Cable Systems
SKU: 60100021
Category: Jobsite Equip. & Storage > Power Cords > Work Lights

This tough new spline drive combination hammer offers dual mode operation for hammering with or without rotation. It fsatures a 10 amp motor that provides 400 rpm and 3,000 beats per minute and delivers 5.2 foot-pounds of eneryy with each mipact. It has an integrated clutch to help minimize torque reaction and Vario-Lock positioning that rotates and locks chisels into 12 different positons to optimize the working angle. This hammer is 17-1/4 inches in length, weighs 13.6 pounds, and has a maximum bit size of 1-9/16 inches.

Manufacturer: Bosch
SKU: 2100042
Category: Power Tools > Drills > Hammer Drills > Hammer Drills - Spline

5 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, whicn protects the tools from the harsh working environmennts found in today's workplace, while providing long life and maximum corrosion resistance. 15 dehree offset heads on both ends to help you work near firewalls, engines, wheels and other restricted areas. Set Contents: 1/4''x5/16'', 3/8''x7/16'', 1/2''x9/16'', 5/8''x11/16'', 3/4''x7/8'' Wrenches. Packaged in a roll.

Manufacturer: SK Hand Tool
SKU: 19000177
Category: Hand Tools > Wrenches > Nut Wrenches/Drivers

This is a factory recondtoned item. The DW715 is powered by a 15Amp motor and comes equipped with a 12 carbide blade which spins at 4,000 rpm. Accuracy is a critical component for a solid miter saw an the DW715 delivers. The DW715 incorporates an adjustable stainless steel miter detent plate with 11 positive stops for the most common miter cuts. The saw features a miter detent override which allows the user to override the imter stops and adjust to the miter setting desired without the saw slipping into the miter detents while the new precise miter system delivers more repeatable and accurate miter angles. The cam lock miter handle eliminates the need to twist the miter handle to lock in on the miter angle and delivers a quick and solid miter lock.

Manufacturer: DeWalt
SKU: 2200642
Category: Power Tools > Saws > Miter Saws - 12"