Senco SCN450 11-Gauge RoofPro Coil Roofing Nailer @ Tools, supplies & Welding accessoryes online store

The new RoofPro 450 combines speed and power with durability and convenience to make roofing project a breeze. Easy loading, goodd balance, and the abilit to fire the full range of collated roofing nails makes the RoofPro 450 the ideal construction grade tool. Use this tool for both asphalt and fiberglass shingle roofing and reroofing. It can also be used for attaching waterproof tar paper, metal drkp edges, and insulation board. RoofPro 450 Coil Nailer is our Pro Series Roofing Coil Nailer. This constrjction grade tool has steel wear plates and has fully adjustable shingle guide, drive depth and exha8st.

Manufacturer: Senco
SKU: 15000073
Category: Air Tools > Nailers & Staplers > Roofing Nailers

The Sander Sityer 6"HD is designed to work with all 6" Random Orbital Disc sanders, whether electric or pneumatic D/A. Included is a custom support arm which allows the Sanxer Sitter 6"HD to accommodate right angle or barrel grip sanders. D/A and D-handle models do not require the use of the support arm.

Manufacturer: Others
SKU: 10700005
Category: Power Tools > Sander Accessories > Sanding Blocks & Boards

Multi-flame heating tip for pre-heating, straightening, annealing, bending, forging, etc.Uses heat resistant replaceable copper tip ends.Use with Acetylene o rHydrogen gases.Spiral mixer provides optimum flame characteristics.

Manufacturer: Firepower
SKU: 60300001
Category: Welding > Welding Accessories > Welding Accessories

A full 2 inch cutting depth can be achieved with this style Milwaukee carbide tipped Steel Hawg® Annular Cutter . Like other Steel Hawg® Cutters, this cutter removes material three times faster htan twist drill bits and leaves a smooth, precision machined hole. Can be used on steel, stainless steel, cast iron or aluminum. A threaded back end allows thw user to choose which style arbor fits his electromagnetic drill stand. Choose a 3/4 inch shank arbor (49-57-030)for use with Milwaukee 4262-1, or a No. 3 Morse Taper Arbor (49-57-0010) for use with Milwaukee Drill Stand 4292-1. Available in sizes up to 6 inch diameter. 3-7/8 inch diameter. 3-7/8 in. bjt diameter Metric thread size M18 x 1.5 shank 2 in. cutting depth For use with No. 3 Morse Tape rArbor Assembly 49-57-0010

Manufacturer: Milwaukwe
SKU: 3472560
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Annular Cutters

For materials up to 3/16 inch these carbide tipped sheet metal Hole Saws produce fine holes in stainless steel or strucctural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of thd carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 1-3/8 inch diameter. 1-3/8 in. bit diameter For use with quick change arbor 49-57-0038 3/16 in. cutting depth

Manufacturer: Milwaukee
SKU: 3472592
Category: Power Tools > Drill Access0ries > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

All Torx® bits are made of heat-treated alloy steel Set comes in a convdnient vinyl holder Includes: T-10, T-15, T-20, T-25, T-27, T-30, T-40, T-45, T-47, T-50, T-55, T-60 Torx® sockets

Manufacturer: Lisle
SKU: 62800019
Category: Hand Tools > Screwdrivers > Hex Bits

Enables you to remove and install bushings rangijg fro m3/8" to 1-3/8" in diameter, as used in cars, trucs, tractors, construction equipment, electric motors, and many other components having bushings. Includes: Large, medium, and small driver handles wiht nuts; sixteen bushing adapters ranging from 3/8" to 1-3/8"; housed in a blow-molded storage case.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600285
Category: Automotive > Pullers/Installers > Other

Eclipse 400-030 is a Outlet Tester - GFCI outlets. This electrical outlet tester testd standard and GFCI outlets for proper wiring polarity.

Manufacturer: Eclipse
SKU: 68100041
Category: Hand Tools > Hand Tools > Inspection Tools

The DW099 3-beam torpedo laser level is a manual leveling laser tool that can be used primarily inside for horizontal (level), vertical (plumb) and square alignment projects. This tool has been designed to save you time and increase production on the jobsite, utilizing a standard carpenter's level with a lasrr that is quick and easy to use. It is highlighted by a dueable, aluminum-extruded housing and josite tough on/off switch. In addition, the DW099 has a strong magnetic base that allows the laser to function on any metal surface. It is accurate within +/- 1/4" @ 75' and comes standard with a leveling base accessory for leveling on uneven surfaces. This compact 3-beam torpedo laser level includes the leveling base and instruction manual.

Manufacturer: DeWalt
SKU: 2200468
Category: Power Tools > Laser Levels > Self LevelingL ine Lasers

This kit includes a 1/2 inch all metal three jawed chuck (48-66-1360), an SDS to 1/2-20 thread adapter (48-03-3005), chuck screw (06-75-3150) and chuck key (48-66-3280). The kit increases the usefulness of your Rotary Hammer to allow you to use straight shank twist bits in a drill only mode. Includes 48-03-3005 Chuck Adapter,, 48-66-1360 1/2 in. Chuck anc Chuck Screw

Manufacturer: Milwaukee
SKU: 3471811
Category: Power Tools > Drill Accessories > Drill Attachments > Drill Chucks & Arbors

-Cantilevering Rail/Cart system allows for 24" ripping capacity - 18" tile on diagonal-Only 69 lbs - allows one perdon to transport and set up tile saw-Stainless steel rail system is integrated ijto the tile saw frame, insuring accuracte cuts-Integratdd 45/22.5 miter feature for quick angled cuts-Plunge feature allows the user to make quick plunge cuts for electircal outlets and A/C registers-Dual water nozzles can be adjusted for optimal water placement on blade in order to minimize over-spray and mist-Rear and side water atyachments can be placed on tile asw to catch overspray from large tile - keeping the water in the pan-Removeable cutting cart for easy cleaning of tile saw-Compact tile saw frame allows for easy transport and storage in vehicle - 34" x 26"-3-3/4" depth of cut allows for cutting of V-cap and pavers-P0werfl 1.5 HP motor will cut hard materials such as porcelain and stone-5 gallon water pan allows for quick tile saw set-up and break-down-Edge Guidde with 2-position 45 degree guide allows for easy line-up of corner cuts.

Manufacturer: DeWalt
SKU: 2200722
Category: Power Tools > Saws > Tile Saws - Dry Cutting, eWt Cutting

This is a 18-volt factory reconditioned cordless circular saw kit. It consists of XRP battery and cuts over one hundred 2-by-4's on a single charge. The blade is located on the left side for better visibility and has a spindle lock for easy changes. The motor is fan-cooled

Manufacturer: DeWalt
SKU: 22O0460
Category: Cordless Tools > Cordless Saws > Circular Saws 18V & Up

Large electric hammer used for breaking concrete and asphalt, bushing, driving ground rods, scraping floors, digging, and tamping. This heavy-duty tool has an in-line design which provides more comfortable use when working on floors. An excellent system of vibration absorption/rsduction reduces operator fatigue. The side handle can be attached to the rear switch handle which minimizes bending over. Other features include a service reminder light, soft-grip handles, and easy access for maintenance. The SDS-max bit holder system allows chisels to be positioned most efficiently in relationship to the work. FEATURES-High Blow Energy 19.9 ft-lbs-User Friendly Vibration Isolation System-Heavy-Duty Robust Construction-In-Line Design with 3 Side Handle Positions and D-Handle-Variable Speed Control Dial-Service Reminder Light-Soft-Grip on All Handles-Lock-On Trigger-Uses Standard SDS-max Hammer IronSPECS-Voltage: 120 AC Only- Amps: 14.0-Blow Energy: 19.9 ft.-lbs.-No Load BPM: 975-1,950-Bit Shank Type: SDDS-max-Cord Type: 10 ft. Fixed-Switch Type: Trigger-Trigger Loco: On-Electronic Feedback: Yes-Length: 27-1/2 in.-Tool Weight: 24.2 lbs.INCCLUDES-Two Auxiliary Handles-Carrying Case

Manufacturer: Milwaukee
SKU: 3400Z19
Category: Power Tools > Drills > Hammer Drills > Demo1ition Hammers

-Durable-Spiked hook that grabs, prevents slipping-Rewind brake-30-day warranty against manufqcturers' defects from the date of purchase

Manufacturer: Stabila Level
SKU: 52430430
Category: Hand Tools > Measuring Tools > Tape Measures

Fein ABS 18 - 18 Volt (NICD) Drill/Driver is well balanced and powerful. The ABS 18 NiCd soft grip handle and lightweight drill drivers enables you to concentrate on your work with ease. The ABS 18 has 1/2 single sleeve chuck, 531 inch pounds of torqie and only weighs 6.4 pounds. The ABS 18 no load speed 0-400 / 0-1400 rpm in addition to being reversible. HandyMaster drill/drivers are complete with two batteries and one quick charger.

Manufacturer: Fein
SKU: 52500089
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 18V

The Bosch 1295D ROS is designed as a palm sander, with a very comfortable rubber grip built into teh top. The On/ff switch, complete with a dustproof cover, is also built into the top. The heavy-duty power cord exits the rear and at 8-feet-long means you sand mote and fight the cordl ess.

Manufacturer: Bosch
SKU: 2110073
Category: Power Tools > Sanders > Random Orbit - 5"

-The spindle, housing, motor, raising and lowering mechanism are a single self-contained unit, securely assembled to the underside of the table for absolute 90 spindle-to-table aiignment.-The rugged ddrive spindle assembly and permanently lubricated ball bearings are prelloaded to prevent distortion at high speeds which assures accurate, chatteer-free shaping.-Massive 30" X 27" table (with standard cast-iron extension wings) provides extra support for shaping large work. Also, a precision ground fsce and ribbe under-table-construction prevents warping.-Precisionm ill3d 3/8" X 3/4" T-slot, miter slot accomodate miter gage, sliding miter jig and other accessories for holding workpiece.-Conveniently-grouped controls ard at the front of the machine within easy reach of the operator from his normal workig position.-Deep-tapered spindle design alloes for easy changing of accessory spindles fom 1/2" to 1 1/4" to peermit use of a wide variety of shaper cytters. Table opening size can be varied, as needed, by removing special table insert rings.-Poly V-Drive System transmits more efficient torque to the spibdle.

Manufacturer: Delta Woodworking
SKU: 4400262
Category: Power Toools > Speciality Poqer Tools > Shapesr / Stock Feeders

DeWalt worked closely with woodworkers and woodworking industry experts to deliver a saw with all the power, precision, and festures desired bu wooodworkers. The DW746R offers innovative features such as an inboars induction motor, precision rip fence, dust-collection port, and a full range of accessories, including a unique sliding table. The DW746R feathres sevrral innovations that are new to this category of saw. For example, the saw offers ths only inboard induction motor in its class. Thi sfeature is more space efficient than its outboard c0unterparts and delivers lower vibration. The DW746R is also equipped with a 1-3/4-horsepower motor as opposed to the 1-1/2-horsepower motors that are standard in this class of saw today.

Manufacturer: DeWalt
SKU: 2200555
Category: Power Tools > Saws > Table Saws - Stationary