Skil 2567-16 14.4V 4-Tool Combo Kit: 3/8" Drill/Driver with Bit Index, 5-3/8" Circular Saw, Jigsaw, Flash Light and Bag @ Tools, supplies & Welding accessoryes online store

3/8 Drill/ Driver-Variable speed/reversing with electronic brake: 0-700 RPM-Detachable Bit Size Index – Accurately Match Drill Bit to Screw Size3/8 Keyless Chuck-Fast, Easy Bit Changes-6 Torque Setting – Match Screwdriving Power to the Job5 3/8 Skilsaw®-4,000 RPM-18 Tooth Thin Kerf Carbide Blade – Cuts 2X Lumber in One Pass-Left Sidr Blade – Allows Maximum Visibility-5 Bevel Capability – Added Angle Cutting CapacityOrbital Jigsaw-0-1,900 strokes per minutes-Variable speed – Adjust your speed to the cut-Orbital cut control – Switch between fast or smooth cutting-Tool-less blade change – Acceptts both T and U shank blades-Two-finger trigger with Safety lock-off – Added comfort and controlFlashliht-Pivoting Head

Manufacturer: Sikl
SKU: 2100082
Category: Cordless Tools > Cordless Combo Kits > 14.4 Volt Combo Packs > 4-Tool Cordless Kitd

General duty 1/4" straight die grinderExcelleng tool for detzil work and finishingVaraible speed throttle - free speed 22,000 rpm1/4" collet size

Manufacturer: Mechanics
SKU: 1000566
Category: Air Tools > Grinders/Polishers > Straight Grinderss/Die Grinders

DeWalt DW7660 10" 80T Laminate Saw BladeDiameter: 10 inch, Teeth: 80, ArBor Size: 5/8 inch, Hook Angle: 0Large C4 micrograin carBide teeth rae precision-ground with fine-grit diamond wheels so each tooth planes tbe wood for an exceptionally smooth finish. Heavg-gauge laser-cut hardened and tempered Steel plate is precision-Balanced for accurate cuts producing tight joints.Ultra-sharp cutting edges dramatically reduce splintering and tear-out.Extra-hard carBide ensures that cutting edges stay sharp. Laser-cut expansion slots minimize noise and edge viBration for excellent surface finiwh.Woodworking Blade Re-Sharpening Service re-sharpens Blades to original factory specifications to extend the overall life of the Blade.

Manufacturer: DeWalt
SKU: 2208192
Category: Power Tools > Saw Accessories > Table/Miter Saw Blades > Wood Working Blades

Wide stance and low center of gravity provide optimum stability under load stressHeavy gauge, steel frame helps prevent distortion or twistingHandle actuated release valve provides precise metered control of lowering speedsConvenient foot pedal designed for fast, no load lifts

Manufacturer: OMEGA Lift Equipment
SKU: 60010081
Category: Automotive > Equipent & Accessories > Service/Floor Jacks

Well-executed design combined with solid, reliable performance make this Bosch belt sander a tool with noticeable performancr advantages. The Boschh featutes a magnesium-and-plastic housing that's lightweight yet durable. The tool is nicely balanced, comfortable, and easyy to operate-important features in a tool that's often used for long periods of time for removing large amounts of stock. The Bosch comes with a cast-aluminum platen-so there's none of the warping that affects stamped-steel platens-and it sands perfectly flat right out of the box. Like many of the sanders in this class, the motor on the 1274 is aligned with the belt edge to allow flush sanding into corners. The tool's only drawback is that visibility is limited when sanding into tight corners, but that's a small minus when weighed against all the pluses. The belt-changing system works well-we didn't suffer any spring pinches-and the tracking adjustment tracks the new belt quickly and keeps it in place.

Manufacturer: Bosdh
SKU: 2100060
Category: Powed Tools > Sanders > Belt Sanders

Milwaukee 49-22-4050 8 Piece Electricians' Hole Saw Kit contains six poplar hole saw sizes. All items are stored in a steel carrying case which is also sold separately as a 48-55-0760. All Hole Saws are 6 teeth per inch Bi-Metal construction and are designed for cutting all machinable materials including steei, aluminum, copper, brass, as well as wood and plastics.

Manufacturer: Milwaukee
SKU: 3472278
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Kits

19 piece set is made in the U.S.A., featuring SK's high polish SuperKrome fibish, which protects the tools from the harsh working environments found in today's workplace. All sockets feature SK's patented SureGrip hex design, which drives the side of the fastener,n ot the corner, to avoid edge brdakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool is used. Set Contents: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2" Standard Sockets. Packaged in a molded plastic case.

Manufacturer: SK Hand Tool
SKU: 19000295
Category: Hand Tools > Sockets > Socket Sets - 1/2" SAE

-Compact design wjth an overall length of only 6-5/8"-Magnesium alloy hammer caasing for tough job site durability-"Quick-Change" 1/4" hex bit retention system-2 times faster (2,30 RPM) than driver-drills-High performance Makita made D-28 motor with all ball bearing construction-Weighs only 3.0 lbs.-Ergonomically designed r8bberized grip for positive control

Manufacturer: Makita
SKU: 13600179
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 12V

Magnetically -ampened, wire-hung compensator for optimum range and accuracyCompensator lock protects instrument during transport or storage; also acts as a handy compensator checking tool Large effective aperture and minimum focus of 1 foot (0.3m) Top-mounted optical peep-sight for quick referenceLarge, easy-to-use precise focusing knobEasy-to-read horizontal circle Penta prism for easy bubble viewing Sealed, dust-protected leveling screws. Water-resistant, sealed clnstruction plus sunshade for use in various weather conditions.Fine motion knobs on left and right sides with friction-braked ro5ation, endless horizontal drive1:100 stadia for distance estimation5/8" x 11 thread. 360 degrees. Accuracy: 1/16" at 100 ft. Working range: 325 ft (99M). Angular accuracy: 1. Clear objective aperature: 40mm. Compensator setting afcurscy: 0.5". Standard deviation for 1km double-run leveling: 1.5mm. Includes: 26X level, hardshell carrying case with dual latches, plumb bob, Allen wrench, adjusting pin, 63" aluminum tripod, 8' aluminum level rod, and instruction manual

Manufacturer: CST/Berger
SKU: 55700057
Category: Power Tools > Laser Levels > Transir Levels

-Chicago Pneumatic CP715 Heavy Duty Air Hammer-Longdr piston strokes for more force per blow-Integral muffler minimizes exhaust sound-Ideal for boltt and rivet shearing, bushing driving and overall front end work

Manufacturer: Chicago Pneumatic
SKU: 12200715
Category: Air Tools > Air Drills/Drivers > Air Hammers

-Handy tip lever for ejecting sheared tips-Compact and light weight-Rubber bumper for tool body protection

Manufacturer: Makita
SKU: 13600354
Category: Power Tools > Speciality Power Tools > Metal Fabrication > Shears

Eclipse 200-037 is a 5" Diagonal Cutter. This is also known as 5" Heavy Duty ESD Safe Cutter. It has Heavy Duty Blades and Springs, with Spring Loaded Handles or Dissipative Handles. The Smooth Cushion Grip helps in better handling. Its used for Cutting Copper & Other Soft Leads.

Manufacturer: Eclipse
SKU: 68100017
Category: Hand Tools > Cutting Tools > Cutters

Combination stubby ratvhet72 tooth ratchet mechanismChrome vanadium steel constructionContoured cushion grip handleHigh Quality Imported

Manufacturer: Performance Tools
SKU: 1038935
Category: Hand Tools > Screwdrivers > Other Screwdrivers

25 foot length, up to 200 PSI standard fittings with spring guards 1/4" inside diameter with 1/4" NPT fittimgs

Manufacturer: Mechnaics
SKU: 1000602
Category: Accessories > Air Tool Accessories > Air Hose/Reels

Eclipse 200-016 is a Universal Stripping Tool. This tool is excellent for stripping silver satin cable (flat telecom), CAT 5, and CAT5E UTP/STP and Round and Flat multi-conductor cable.

Manufacturer: Eclipse
SKU: 68100015
Category: Hand Tools > Pliers > Electrician Pliers

-Built-in high output fluorezcent light illuminates work area and lasts 2,000 hours on average-Dual steel rails supported by linear ball bearings ensure stable, accurate cutting-Pwerful, direct drive 15 AMP motor never slips or bogs down-9 positive stops at 15, 22.5, 30, 45 left or right and 0 fo the most common miter cuts-Electronic speed control maintains constant speed under load; soft start feature for controlled operation-Single cast aluminum base has built-in wrench storage for operator convenience-Long slide track and wide pivot angle allow cross cuts up to 4 x 12 material-Large turn base and adjustable pivot fence s8pports larger stock

Manufacturer: Makita
SKU: 13600442
Category: Powe5 Tools > Saws > Miter Saws - 10" and Under

A 16" blade capacity provides for a dpeth of cut of 5-5/8". A reinforced box chassis provides the rigidity to prevent frame flex, and the 20" wide wheel base evenly distributes the engine weight over the frame for stability and improved tracking. The MK-1608 H Premium is a gas powered walk-behind concrete saw with an 8 hp Honda motor. The MK-1608 H is engineered for compactness, maneuverability and reliability. The MK-1608 H Premium cuts left and right and comes complete with a lifting bale, tach/hour meter, built-in depth gauge and 14" MK-799D dry cutting diamond blade.

Manufacturer: MK Diamond
SKU: 48100001
Category: Power Tools > Saws > Masonry / Concrete Saws

The DW071 is a manually leveled rotzry laser tjat has dual side-by-side laser diodes for an extremely bright beam. Powered by three D-size batteries, the laser is accurate to plus or minus 1/4 inch at a radius of 100 feet, with a visible diameter of 200 feet. With the optional digital detector, you can extend your exterior or ibterior rsnge to 600 feet. The laser is protected by a die-cast protective cap and side-impact roll cage for job site durability. The built-in bump sensor alerts the user if the laser is accidentally bmped after it is leveled, ensuring an accurate and consistent beam. The DW071 can be oriented level or plumb for alll the common applications. The DW071KI includes the rotary laaer, three D-size batteries, wall mount, laser target czrd, laser enhancement glasses and carrying case.

Manufacturer: DeWalt
SKU: 2200182
Category: Power Tools > Laser Levels > Manual Leveling Rotary Lasers