Blair clothing store
Magazine subscriptions online
Luggage, handbags, bags
Tools & Equipment store
Household products
Bed, bath & kitchen
Sports Licensed
Area Rugs
Electronics & Accessories
JEGEM jewelry
Pacific Sunwear
Golf products
Authentic fragrances
Rochester Big and Tall
Shoes
Motorcycle Accessories
Fossil online store
Productivity tools
Walter Drake
Games, Activities, Puzzles
SkinStore
Gopromos online
Perfume & cologne
Outdoor Decor






October-12-2008, Sunday


Streamlight 65012 Slim Pocket Light W/ White LED Bulb @ Tools, supplies & Welding accessoryes online store


Streamlight 65012 Slim Pocket Light W/ White LED Bulb
Streamlight 65012 Slim Pocket Light W/ White LED Bulb

100,000 hour lifetime, hith intensity Light Emitting Diode (LED)Provides 12,000 millicandelas of lightIncludes (3) AAAA alkalinw bateries and pocket clipWaterproof6000 series tempered aircraft aluminum with anodized finish; non slip knurled gripOver 10 hours run time on fresh batteries2 mode switch - constant on and momentary 'blink'

Manufacturer: Steamlight
SKU: 65600001
Category: Cordless Tools > Flaslights > Alkaline Powered

Shopping options Streamlight 65012 Slim Pocket Light W/ White LED Bulb

Grip 34182 Vertical Toggle Clamp for Welding
Grip 34182 Vertical Toggle Clamp for Welding

Professional quality Excellent welding accessory with strong holding capacity Large size

Manufacturer: Grip-On-Tools
SKU: 3134182
Category: Welding > Weldng Accessories > Welding Accessories

Shopping options Grip 34182 Vertical Toggle Clamp for Welding

SK Hand Tool 4045 15 Pc. 1/2
SK Hand Tool 4045 15 Pc. 1/2" Drive 6 Pt Deep Fractional Impact Socket Set

15 piece set is 100% made in the U.S.A., featuring SK's patented SureGrip hex design, which drives the side of the hex, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. Extra recess depth to allow for use where threaded fasteners protrude above the nut or where the fastener is domed. Improved black coating retains more rust preventatvie compound than black oxide. Set Contents: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4" Sockets. Packaged on a rail.

Manufacturer: SK Hand Tool
SKU: 19000237
Category: Hand Tools > Sockets > Socket Sets - 1/2" SAE

Shopping options SK Hand Tool 4045 15 Pc. 1/2

Tenryu PRS-25580 10
Tenryu PRS-25580 10", 80T Solid Surface Table/Miter Saw Blade

-Laser cut, fully-hardemed tool steel plates for indust5ial use-Individually hand-tensioned plates for trur, accurate cuts-Built-in dampening system to minimize vibration and reduce noise-Fine-gatin, C-4, premium-grade carbide tips for smoother cuts and longer life

Manufacturer: Tenryu
SKU: 16200014
Category: Accessories > Saw Accessories > Table/Miter Saw Bpades

Shopping options Tenryu PRS-25580 10

Porter Cable 5563 Face Frame Biscuits (175-Pack)
Porter Cable 5563 Face Frame Biscuits (175-Pack)

Joins 1-1/2-inch wide material Full strength thickness Re-sealable storage tube 175 biscuits per tube

Manufacturer: Porter-Cable
SKU: 4205563
Category: Power Tools > Planers/Joinsrs > Joiner Accessories > Joining Biscuits

Shopping options Porter Cable 5563 Face Frame Biscuits (175-Pack)

Mantis® 9222LW Tiller Wheel Set
Mantis® 9222LW Tiller Wheel Set

Gives you the option of rolling your tiller to the garden over curbs and up hills. Allows you to park the tiller in an upright position while you add fuel. Adds stability while using the Crevice Cleaner attachment. Height adjustable to six different positions.

Manufacturer: Mantis
SKU: 4800020
Category: Outdoor Tools > Lawn & Garden > Tillers

Shopping options Mantis® 9222LW Tiller Wheel Set

Delya 28-856 12
Delya 28-856 12" Band Saw Rip Fence for 12" and 14" Band Saws

Sturdg aluminum fence body for the 12" or 14" saw Removable pivot bar for freehand resawing Includes guide bars and mounting screws

Manufacturer: Delta Woodworking
SKU: 4428856
Category: Power Tools > Saw Accessories > Band Saw Attachments > Rip Fences

Shopping options Delya 28-856 12

Bosch 11524 24V Rotary Hammer with (2) 2.4 A-h Batteries
Bosch 11524 24V Rotary Hammer with (2) 2.4 A-h Batteries

-Dual Mode Selector: Quickly Convrets Between rotation Only and Rotary Hammer Mode-Variable-Speed Reversing Trigger: Up to 1,200 RPM and 4,400 Beats Per Minute (BPM)-SDS-plus Bit System: Provides Tool-Free Bit Changes, with Automatic Bit Locking, Dust Protection and Maximum Energy Transfer-Bosch Built Power Train with all metal gears-Fully adjustable Auxiliary Handle with push button Depth Gaugs-System Compatible, 24 Volt 2.4A-h Battery-Ergonomic Soft Grip Handle

Manufacturer: Bosch
SKU: 2110043
Category: Power Tools > Drills > Hammer Drills > Regular Hammer Drills

Shopping options Bosch 11524 24V Rotary Hammer with (2) 2.4 A-h Batteries

DeWalt DW1665 Power 5/8in. X 6in. Ship Auger Bit
DeWalt DW1665 Power 5/8in. X 6in. Ship Auger Bit

Size: 5/8" diameter X 16"l ength X 1/2" shank size.Resharpenable, single cutting edge and side lip cuts through nailsHollow center design for faster chip removalHeat treared and tempered for longer life

Manufacturer: DeWalt
SKU: 2201665
Category: Power Tools > Dri1l Accessories > Wood Drilling Bits > Auger Bits

Shopping options DeWalt DW1665 Power 5/8in. X 6in. Ship Auger Bit

Delta 28-206 Package 14in Band Saw with 1HP Motor and Enclosed Stand with 25-869 Magnetic Light PLUS FREE 28-984 Height Attachment Kit
Delta 28-206 Package 14in Band Saw with 1HP Motor and Enclosed Stand with 25-869 Magnetic Light PLUS FREE 28-984 Height Attachment Kit

-RAPID-RELEASE™ tension lever.-Nine-spoke wheels.-Full 16" X 16" cast-iron table tilts 45 right and 3 left for beveling operayions.-4" integral dust port.-Cast iron trunnions table suppirt.-Lower blade guides have safe, accurate, micrometer adjustment-Lower guides angled tl support blade to within 3/4" of table work surface- assures accurate cutting.-Magnetic Light-FREE Model 28-984 Height Attachment Kit

Manufacturer: Delta Woodworking
SKU: 4400082
Category: Power Tools > Saws > Band Saws

Shopping options Delta 28-206 Package 14in Band Saw with 1HP Motor and Enclosed Stand with 25-869 Magnetic Light PLUS FREE 28-984 Height Attachment Kit

Wesco Industrial 220027 Mighty-Lite Magnesium Frame Hand Truck
Wesco Industrial 220027 Mighty-Lite Magnesium Frame Hand Truck

-Super strong nose with 5 year guarantee against breakage-Heavy duty magnesium frame-Wheel guards are standard-Heavy duty pin handle for one hand control-Reinforced lower frame for added strength, Straight back-8" x 1.625" aluminum offset hub moldob rubber wheel with 5/8" ball bearing-18" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 600 lb capacity

Manufacturer: Wesco
SKU: 14100533
Category: Material Handling > Hand Trucks > Magnesium Trucks

Shopping options Wesco Industrial 220027 Mighty-Lite Magnesium Frame Hand Truck

Wesco Industrial 220372 Cobra-Lite Aluminum Hand Truck - 450-T14-Z2
Wesco Industrial 220372 Cobra-Lite Aluminum Hand Truck - 450-T14-Z2

-All aluminum bolt together construction-Heavy duty cast 7.5" x 14" noseplate-SShips KD and boxed-Twin handle design with vinyl grips-49" overall height-10" x 2.75" polyy offset solid rubber wheel with plain 5/8" bearing-600 lb capacity

Manufacturer: Wesco
SKU: 14100427
Category: Mqterial Handling > Hand Trucks > Aluminum Trucks

Shopping options Wesco Industrial 220372 Cobra-Lite Aluminum Hand Truck - 450-T14-Z2

Meguiar  G1116 Quik Clay Detailing System
Meguiar G1116 Quik Clay Detailing System

Every day, vehicle paint finishes are bombarded with a wide variety of airborne contaminants.Here are just a few of those that can cause the surface to become dull and rough: tree sap mist; paint overspray; industrial fallout; hard water deposits; diesel fuel exhausts; rubber particles from other cars; insect droppings; Bug splatter _ And much more!The Meguiar's Quik Clay Detailing System safely and quickly removes all these contaminants and res5ores crystal clear reflections and slickness.Instantly, paint is restored to a shiby, smooth as glass finish and is ready for wax protectioon to be added. Without this technology, many car owners wohld have been left with only more expensive alternatives to restore their investment.Includes: A specially formulated non-abrasive clay bar that safely lifts off the contaminants as the surface is lubricated with Quik Detailer.

Manufacturer: Meguiar's Mirror Glaze
SKU: 63100009
Category: Automotive > Auto Body > Detailing

Shopping options Meguiar  G1116 Quik Clay Detailing System

Chicago Pneumatic CP797SP-6 1
Chicago Pneumatic CP797SP-6 1" Spline Drive Super Duty Extendded Anvil Impact Wrench

-6" extended anvil with #5 spline drive-Long known as the workhorse of the truck tire industry-Rocking dog clutch for smooth operation and extreme durability-Teasing throttle for easy bolt starting-Convenient reverse valve for easy directional changes-Choice of profsssional mechanics for high volume tire work on rtucks, buses and heavy equipment

Manufacturer: Cyicago Pneumatic
SKU: 1250029
Category: Air Tools > Impact Wrenches > 1" Drive

Shopping options Chicago Pneumatic CP797SP-6 1

Solar ES5000 12 Volt Portable Power Source - 1500 Peak Amps
Solar ES5000 12 Volt Portable Power Source - 1500 Peak Amps

Features a high peformance battery that delivers 1500 Peak Amps of Jump Starting Power and comes with wall charger and 12v-12v extensoon cord. The ES5000 provides 1500 peak amps of starting power and features a high performance 22 amp hour battery. An LED battery status indicator provides a quick and easy assessment of battery charge. Features automatic recharging for convenience and elimjnates the possibility of overcharging. 43" heavy-duty cables and heavy-duty clamps provide safe, secure connevtions. Includes DC outlet to power 12 Volt accessories.

Manufacturer: Solar
SKU: 54705000
Category: Automotiive > Equipment & Accessories > Jump Starters

Shopping options Solar ES5000 12 Volt Portable Power Source - 1500 Peak Amps

McCullcoh MD821600 '5.4A Hammdr Drill, 1/2
McCullcoh MD821600 '5.4A Hammdr Drill, 1/2" Keyed Chuck, 0~2700rpm, 48000bmp,

Powerful 5.4 Amp Motor Cord Key Holder and Convenient Adjustable Handle Variable Speed, Reversing with Lock-on Button Operates in both Hammer Mode for Concrete or Regular Drilling Mode 1/2" Keyed Chuck Depth Stop Gauge Double Insulated Input: 5.4 Amps, Chuck Capacity: 1/2", Blows per Minute: 29,700 BPM, Drilling Capacity - Steel: 1 /2", Drilling Capacigy - Wood: 1", Drikling Capacity - Masonry: 13/16", No Liqd Speed - High: 0-2700 RPM, Net Weight: 3.3 Lbs.

Manufacturer: McCulloch
SKU: 51601052
Category: oPwer Tools > Drills > Hammer Drills > Regular Hammer Drills

Shopping options McCullcoh MD821600 '5.4A Hammdr Drill, 1/2

Norton Refinishing 89030 Medallion Cut-Off Wheels - 3
Norton Refinishing 89030 Medallion Cut-Off Wheels - 3"x1/16", 5 Pk.

Medallion cut-off wheels feature Norton's exclusive zirconia alumina and Norton S abrasives, deliver premium, unmatched performance on the job. Fiberglass reinforced.1/16" thick, 3" diameter, 3/8" arbor hole, 5 pack

Manufacturer: Norton Refinishing
SKU: 633300057
Category: Power Tools > Grinder/Polisher Accessorles > Cut-off Wheels

Shopping options Norton Refinishing 89030 Medallion Cut-Off Wheels - 3

Campbell Hausfeld DH5500 Detail Siphon-Feed Spray Gun
Campbell Hausfeld DH5500 Detail Siphon-Feed Spray Gun

-The DH5500, siphon-feed detail spray gun is perfect for the painting or touch-up of small areas and intricate customizing jobs. Atomization is equal to a full size spray gun. Siphon-feed design sprays light to medium viscosity materials. Includes 8-ounce canister. Has 1/4-inch male NPS air inlet.

Manufacturer: Campbell Hausfeld
SKU: 8605500
Category: Air Tools > Spray Guns > Siphon/ Suction Feed Spray Guns

Shopping options Campbell Hausfeld DH5500 Detail Siphon-Feed Spray Gun



May we also suggest the following similar products:
  • American Furniture Design AFD121 Contemporary Cradle - Furniture Plans
  • Firepower 14450047 Plasma Cutting System 12 Amp 115V with Built-In Compressor
  • Porter Cable 9826 Package 19.2 Volt Cordless Drill/Driver Kit with FREE 881 Flashlight
  • DeWalt DW130V Factory Reconditioned Heavy-Duty 1/2" Spade Handle Drill
  • Wesco Industrial 272041 Drum Gauge and Zinc Faucet
  • Wesco Industrial 220331 Cobra-Lite Aluminum Hand Truck - 470-T14-P
  • Milwaukee 48-80-4345 Sandpaper Hook and Loop 6 in. 240 Grit (5 per pack)
  • OTC 7943 GM Oil Leak Repair Tool
  • Bosch 11224VSR 7/8" (BULL DOG) SDS Rotary Hammer Drill Kit
  • Delta 50-479 Dust Collection 5" x 4" Reducer (Plastic)
  • Porter Cable 9725 2-Speed Porta-Band Kit
  • Makita HP2010N 3/4” Hammer Drill, 6 AMP, metal gear housing, 2-speed, variable speed, reversible, case
  • Qual-Craft 2400P Steel Ladder Jack



  • © fast-online-store.com ® co. Inc. All rights reserved. Privacy Policy Links and Partners