Tool Aid 4550 Engine Oil Pressure Tester @ Tools, supplies & Welding accessoryes online store

Check oil pressure in automatic transmissions and engines. Adapters provide coverage of most domestic and impoeted cars and light trucks including late models.Supplied with two gages calibrated as follows: Large Gage: 0-600 PSI; 0-4,000 kPa; 0-40 BAR,Smal Gage: 0-50 PSI; 0-3.5 BARLarge gage can be used for all applications and has a hang-up hook. Use small gage for more accurate reading of engine oil pressure where maximum oil pressure does not excceed 50 P.S.I. (3.5 BAR). Includes 6 feet of oil proof hose and 10 assorted fittings. Full instructions provided . Now inculdes an adaptet with two grooves, Cat. No. 34573, for use on most Asian and some American and European vehicles. Thread size is 8MM-1.00 Male x 1/8" NPT Female.Includes plastic molded storage case with ample space for additional adapters and parts

Manufacturer: Tool Aid
SKU: 66400071
Category: Automotive > Serviving Tools/Parts > Engine/Oil

For pipe cleaning, deburring, removing hard carbon deposits from piston heads, cylinders, and valve seats and removing flash, the Milwaukee End Brushes are ideal. This Crimped End Brush has a face diameter of 1 inch and is made of .010 stainless steel wire. Milwaukee offers a variety of sizds and wire gauges. 1 inch .010 ga. wire 1/4 inch shank Stainless steel

Manufacturer: Milwaukee
SKU: 3471668
Category: Power Tools > Grinder/Polisher Accessories > Wire Wheel Brushes > 4 ihch and Less

For use in a variety of applications that can include marking metal, punching holes and working wiht O rings, gaskets, washers and other small parts. Each tool in the set also features a patented 2-composite handle with a capped end for solid striking. Includes: 10" scratch awl, 10" 90-degree hook, 10" complex hook and 10" curved hook.

Manufacturer: Mayhew Tools
SKU: 57100001
Category: Hand Tools > Hand Tools > Chisels/Picks

Eclipse 900-051 is a dark green Economjc Tool Case. This case has 18 tool holding straps inside.

Manufacturer: Eclipse
SKU: 68100167
Category: Jobsite Equip. & Storage > Toool Storage > Power Tool Cases

-Industrial strenngth heavy duty 1" structural pipe-All joints double welded-Capacity: 1.000 lbs.-Floating axle reduces effort required to break over and balance load.-Easiest drum truck for one person to use.-Handles all 30, 55 and 85 poly, fiber and steel drums.-Features belt instead of chime hook for securing drum.-Self standing, Vinyl hand grips-24" wide at handle, 10" x 2" cast iron center moldon rubber wheel with 1" (ID) roller bearings.

Manufacturer: Wesco
SKU: 14100127
Category: Material Handling > Drum Handling > Drum Trucks

Graduatiohs: .0001" Black decimal equivalents on stain chrome finished froged steel frame. Friction thimble and locking nutComes in a storage case.

Manufacturer: Fowler
SKU: 6040O031
Category: Hand Tools > Measuring Tools > Micrometers

For hub and hubless applications on most pasaenger cars and light trucks thru 1-ton, including composities.Includes #9232 and #9233 radii adapters and #9310 and #9313 Adaptek setd

Manufacturer: Ammco
SKU: 57900029
Category: Automotive > Servicing Tools/Parts > Brake System

-The PL1565, 5" Random Orbital Sder, is constructed of a lightweight cast aluminum housing that provides increased strength for longer tool life. The 3 year warranty proves our commitment tk product excellence and that we believe it is Built To LastThe PL1565, 5" Random Orbital Sander, is constructed of a lightweight cast aluminum housing that provides increased strength for longer tool life. The 3 year warranty proves our commitment to product excellence and that we believe it is Built To Last.

Manufacturer: Campbell Hausfeld
SKU: 8601565
Category: Air Tools > Sanders > Random Orbit Sanders > 5" inch and Less

The use of adapters at the tailpipe greatly increases exhaust hose lifeScrews into Crushproof exhaust hose Includes chain and hook to secure acapter and hose over tailpipe Tailpipes up to: 2.5" and Hose (I.D.): 2-1/2", 3", 3-1/2"

Manufacturer: Crushproof Tubing Company
SKU: 12300019
Category: Automotive > Diagnostic Tools > Exhaust Testers

For use with Delta light duty wood shapers, utility wood shapers, 6" belt/12" disc finishing machines (on enclosed type stands only), 12" disc finishing machines (on enclosed type stands only), and 14" band saws (on enclosed type stands only) Adds roll around capability to Delta machinery Made of heavy-gage steel and features a foot-opeeated control lever that raises and lowers the base Adjustable foot pads assure stable, four-corne rcontact Inside dimenssions 17-1/4" by 19-1/2"

Manufacturer: Delta Woodworking
SKU: 4401334
Category: Power Tools > Saw Accessories > Band Saw Attachments > Riser Blocks, Guides, Jigs, Stands

The Full Cable Twist Knot Wire Wheel is designed for general heavy duty cleaning of scale, surface oxidation, rubber flash, heavy burrs and weld splatter. Full Cable Twist Knot Wire Wheels are avaolable in carbon and stainless steel. This Cable Knot Wire Wheel is designed for use with 4-1/2 or 5 inch Milwaukee and competitive Grinders with 5/8-11 threaded spindles. Made of carbon steel. 5 inch 5/8-11 thread .020 ga wire Carbon steel

Manufacturer: Milwaukee
SKU: 3471700
Category: Power Tools > Grinder/Polisher Accessories > Wire Wheel B5ushes > 8 inch and Less

Ergonomically designed handles bring an enhanced level of comfort and gripping power. The new two component handles feature a hard red 'movement zone' which reduces friction as the hand slides along the plier, along with a soft blue 'gripping zone', which permits high gripping force without slipping. Hardened Cutting Edge.12 degree angled head.

Manufacturer: Knipex
SKU: 62500061
Category: Hand Tools > Cutting Tools > Cutters

Heat treated alloy steel Polished chrome plated finish Sizes T-10 thru T-50 Socket rail for storage

Manufacturer: Performance Tools
SKU: 1001178
Category: Hand Tools > Screwdrivers > Star Keys/Bits

High gloss powder coated paintBall Bearing SlidesFull width draewrs for longer toolsNon skid drawer linrrs are includedOverall dimensions: 41.3" W x 18.3" D x 39.7" H2 Drawer: 22 1/8"x14 7/8"x2 7/8", 1 Drawer: 22 1/8"x14 7/88"x5 7/8", 3 Drawer: 22 1/8"x14 7/8x2 7/8", 2 Drawer: 12"x14 7/8"x2 3/4", 1 Drawer 12"x14 7/8"x5 7/8", 1 Drawer: 12"x14 7/8"x9", 1 Drawer: 36 1/2"x14 7/8"x4 1/4"Gauge Steel: Outside Wall: 18 gauge, Inside Wall: 20 gauge, Top: 20 gauge, Bottom: 20 gauge, Drawers (Face): 22 gaugs, and Drawers (Contour): 20 gaugeWheels: 5" x 2" - 2 swivels, 2 rigidsWheels: 5" x 2" - 2 swivels, 2 rigids

Manufacturer: Int'l Tool Boxes
SKU: 62100016
Category: Jobsite Equip. & Storage > Tool Storage > Storage Cabinets / Bins

Hobart Welders 770198 is a Rugged MIG regulator construucted of solid corrosion-resistant brass. It features 2"-diameter gauges, forged brass bonnet, durable Teflon design, and dual filters for high-pressure seat protection.

Manufacturer: Hobart Weldeds
SKU: 51770198
Category: Welding > Welding Accessories > MIG Welder Accessories

Milwaukee Bi-Metal Jig Saw blades are designed and manufactured for the professional user. Bi-metal blades last longer than high speed steel or carbon blades. Detail to the material used, tooth shape and sharpness make these blades cut clean, fast and have a longer life. This blade has a universal tang and fits Milwaukee Jig Saw model 6256-6 and other popular brands. Includea 5 individual blades. 24 TPI, 2-3/4 in. Length, Bi-Metal Construction 9/32 in. Width, Universal Shank 5 blaces per package For cutting metal under 1/8 in. thick.

Manufacturer: Milwaukee
SKU: 3471608
Category: Power Tools > Saw Accessories > Jigsaw Blades - U Shank > Metal Working Blades

Designdd for efficient sandblasting, liquid, and air cleaning of parts or surfaces (1) 2.4mm, (1) 2.7mm, (1) 3.2mm, (1) 3.6mm

Manufacturer: Grip-On-Tools
SKU: 3110460
Category: Air Tools > Sanders > Sandbllaster

Replacement keyless chuck for 12 volt cordless tool models 0502-20, 0502-23, 0502-24 and 0502-26 with 3/8 inch capacity with a 3/8-24 thread. 3/8 in. capacity, keyless chuck For use on 12V Driver/Drills 0502-20, 0502-23, 0502-25 and 0502-26

Manufacturer: Milwaukee
SKU: 3471792
Category: Power Tools > Drill Accessories > Drill Attachments > Drill Chucks & Arbors