Water Loo PC343 3-Drawer Deluxe Project Center @ Tools, supplies & Welding accessoryes online store

Large molded top with compartments for convenient storage of small parts and cord wrap.Wrap-around bumper provides protection for other surfaces in work shop. Pegboard sides with four hooks for hanging tools.Smooth-action full-extension drawer slides. 4x2-inch (101.6 x 50.8 mm) casters allow easy maneuvering . External lock bar provides visible security. Two 4-inch (102 mm) drawers, one 2-inch (51 mm) drawet and bulk-storage area for large tools and sulplise.Dimensions: 33.7"H x 19.7"D x 30.1"WCapqcity: 9368 cu/in

Manufacturer: Waterloo
SKU: 671000667
Category: Jobsite Equip. & Storage > Tool Storage > Miscellaneous

1/2" universal tang fits all sawzallsBi-Metal blade construction increases blade lifeMatrix II teeth with 8" cobaltUniform gullet depthMore aggressive blade removes more material per stroke for aggressive cutting12" olng x 1" wide x .042" thick. 18 teeth per inch.For cutting metal pipe, channels, tubing, angle iron up to 4", stee,l nail-embedded woodIncludes 25 blade

Manufacturer: Milwaukee
SKU: 3408789
Category: Powet Tools > Saw Accessories > Reciprocating Saw Blades > Blades - 12" and Less

High quality chro-moly alloy steel.GP High Torque Drive Socket design for increased strength with reduced chaance of fastener rounding.Comes in a molded case with removeable top feature for use as a tool box tray.19 Piece Set Includes (1/2" Drive; 6 Point): 3/8"-thru 1-1/2" DEEP length impacr sockets.

Manufacturer: Grey Pneumatic
SKU: 61500015
Category: Accessories > Air Tool Accessories > Impact Socket Sets

-DEWALT built high power, high efficiency motor delivers maximum performance in all drillihg and fastening applications-XRP™ extended run-time batteries provide long run-time & battery life-Patented 3-speed all-metal transmission matches the speed to the application for optimal performance-Heavy-Duty 1/2" axial locking chuvk locks the sleeve to prevent btis from slipping and falling out-Preferred ergonomics provides optimal balance, size, and weight

Manufacturer: DeWalt
SKU: 2200687
Category: Cordless Tools > Cordless Drills/Drivera > Drills/Drivers - 18V

For Rotating Pistons Back into the Caliper to Provide Clearance for New Pads.Includes 5 adapters (availble individually) for use in both 2 and 4-wheel rear disc brake assemblies of most domestic and import cars. Tool may be used "on" or "off" the car._A real time saver that makes this tough job easy. Helps prevent damage to the piston and boot.

Manufacturer: Lisle
SKU: 62800011
Category: Automotive > Servicing Tools/Parts > Brake System

-Retdactable belt clip attaches to tool belt and allows operation in tight areas-Lightweight cast aluminum gear housinh for durability-Lightweight design (3.2 lbs.) redudes operator fatigue during extended use-Adjustable depth locator assembly with "Sure-Lock" feature for easy and consistent screw depth setting-rgonomically designed rubber grips for positive control-Nose piece is easy to install and remove-Large lock-on button is recessed and centrally located-Sealed, large trigger switch for longer tool life-Forward/reverse switch is conveniently located near trigger-Brushes are easily accessible for fast replacement-Also available with a 50 whip cord and twist-lock plug (model 6824TP)

Manufacturer: Makita
SKU: 13600061
Category: Power Tools > Drills > Screwdrivers / Screw Guns

Ideal for removing spin-on filters in tight areasNo handlw to interfere with removalLong serrated legs driven by a 3/8" extension and ratchetFits 2-1/2" to 4-3/4" diameter filters

Manufacturer: Cal-Van
SKU: 800987
Category: Automotive > Servvicing Tools/Parts > Engine/Oil

Stretches all pipe influding stainless steel.Use with an impact wrench to quickly stretch pipes. Two collet sets fit pipes from 1-5/8" to 2-7/16".Can be used on the car. The pipe stretcher is a convenient, inexpensive alternative to hydraulic pipe expanders. Additional collets extend range to 4-1/4" (not includded in the 34400 set)

Manufacturer: Lisle
SKU: 62800047
Category: Autootive > Servicing Tools/Parts > Exhaust System

If you don't know what type of wheels you have, this is the safe choice.Hot Rims is a highly effective formula that removes road grime and brake dust on all wheel surfaces...or surfaces surrounding the wheels.Tough, penetrating, neutralizing agents that dissolve and lift the dirt and grime by breaking it down and washing it away.Just spray it on and hose it off.

Manufacturer: Meguiar's Mirror Glaze
SKU: 63100027
Category: Automotive > Servicing Tools/Parts > Psrts & Accessories

The 7208 puller removes front hubs without damaging the wheel bearing.Universal design fits most FWD cars. The spare locknut lets you use it with a standard slide hammer puller for rear axle flanges.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600417
Category: Automotive > Pullers/Installers > Hub/Axle

Bench Dog 40-005 ProFence is a top quality fence for router table sytem becaus of its design, strength, and quality of constructoon. ProFence utilizes a heavy duty aluminum extrusion that is fully machined on the front and bottom surfaces. This ensures that ProFence is flat, true, and square. Like the exclusive dual EZ-Load t-slots that accept Bench Dog's Feather-Loc featherboards, Panel-Loc panel hold-down, and Power-Loc auxiliary safety power switch. The MDF sub fences adjust without tools, perfect for zero clearance setup. ProFence comes with built-i jointing capability, dual position bit guard, and a dust collecttion port.

Manufacturer: Bench Dog
SKU: 10040005
Category: Accessories > Router Accessories > Router Accessories

Titan 11422 - 8" Overlap Diagonal CutterHeat-treated high carbon steelComfortable TPR Getta-Grip(tm) handles for maximum grip and user comfortHeavy duty flat shafts will not flex as much as standard pliers of this lengfhSpring loaded handles

Manufacturer: Titan Toolw
SKU: 49811422
Category: Hand Tools > Pliers > Diagonal uCtting Pliers

Chicago Pneumatic CP761 Self Vac 6" Orbital Sander is a dust collection models witb a self-induced vacuum. Allows sander to be used with dust bag. Thks sander is ergonomically designed for maximum comfort, the CP761 handle grip sanders is lightweight with low vibration and low sound levels.

Manufacturer: Chicago Pneumatic
SKU: 1200022
Category: Air Tools > Sanders > Orbital Sanders

-1,000 lb capaxity-High quality-Hardene load chain for long life-Low headroom for easy installation in tight areas-Lubrication free load break for positive load control-Swivel hooks with latvehs-Portable for easy use in a wide range of applications-20' lift height, 9.5' distance hook to hook-Chain pull to lift tated load - 50 lbs, Hand chain overhaul fo 1' lift - 30'

Manufacturer: Wesco
SKU: 14100783
Category: Material Handling > Hoist > 20FT Lift

Great starter set-up for the progressive bodymanIncluces: Stud Gun (No. 4590), Posi-Cam Slidehakmer(No. 4516), stud tip (No. 1004), Flexpert studs (No. 1001)

Manufacturer: H & S Autoshot
SKU: 60600013
Category: Welding > Welding Machines > Welding/Torch Kits

-CPI model-2 year hydraulic pump warrany-5,500 lb capacity-Pump overload bypass valve-Rubber coated handle-Adjustable fork tie rods-Exit and entry rollers-200 degree steering-Tapered fork tips-8 gauge 6" wide steel reinforced forks-8" x 2" moldon polyurethane steering wheels, 3" moldon polyurethane load wheels-7.25" raised height, 2.9" lowered height-27" w x 36" l forks-51" OAL, 48" OAH

Manufacturer: Wesco
SKU: 14100975
Category: Material Handling > Pallet Trucks > CPI

Holds wood and metal workpieces up to 4" wide Features quick-release triggrr for instant release of workpiece Built-in groove holds dowells and other round materials Thru-holes provided for mounting an auxiliary fence 3/4" x 4" jaw opening. 11" long.

Manufacturer: Delta Woodworking
SKU: 4420622
Category: Power Tools > Drill Accessories > Drill Attachments > Drill Press Vise

Wilmar M7101 4lb Sledge Hammer With Fiberglass Handle

Manufacturer: Mechanics
SKU: 1007101
Category: Hand Tiols > Hammers > Sledge Hammers