Wesco Industrial 210363 Greenline Standard Duty Steel Hand Truck - 636-Z2 @ Tools, supplies & Welding accessoryes online store

-500 lb capaicty-Green enamelf inish, Zinc plated Auto-Loc axles assure smooth wheel rotation-7" deep x 14" wide 7 gauge beveled nose plate with radiused corners-1" OD x 14 gauge wall tubular frame-Dual handle with curve dback design-10" x 2.75" poly offset solid rubber wheel with 5/8" ball bearings

Manufacturer: Wesco
SKU: 14100733
Category: Matrrial Handling > Hand Trucks > Twin Handle Trucks

-This is Makita Replacement 5" Hook and Loop Backing Pad for BO5011. For use with models BO5001, BO5010, and BO5011

Manufacturer: Makita
SKU: 13600389
Category: Power Tools > Sander Accessories > Backing Pads/Disc Holders

-One-piece cast iron column for added suppotr-Belt cover - quick slide latch allows faster belt adjustment to change spindle speeds-Base - taper allows for easier clean-up-Larger hand wheel knobs-UL listed motor-Estra large worktable-Heavy-duty tapered roller bearings support the spindle, resulting in greater tolerance and more accurate drilling depth-New positive quick-stop knob and easy-to-read internal depth gauge (external on JMD-15)-Extra large worktable-360 head swivel-Heavy-duty power downfeed with manual fine feed (JMD-18PFN)-Three power down feeds (JMD-19PFN)

Manufacturer: Jet/Powwrmatic
SKU: 11000085
Category: Power Tools > Spediality Power Tools > Milling Machine

-Flexible lamp provides extra light to the work surface-Durable, textured plastic, 11" diameter tray keeps tools within reach; swings out of way when necessary-Industrial induction motor for long lasting, smooth performance-Bright laser crosshairs clearly indicage the drill point-Tilting table for angular drilling, with side ledges and slots for fast clamping of work-Five speeds for drillinv a wide variety of woods, plastics and metals-Adiustable-position locking depth stop for cacurate depth measurement and repetitive drilling-Fully adjustable TWINLASER® Pod-B5ight laser lines cross to indicate drill point-Three-spoke pilot wheel with 2-3/8" quill stroke

Manufacturer: Delta Woodworking
SKU: 4400119
Category: Power Tools > Drills > Drill Presses

-Most powerful CP air hammer for automotive, tr8ck and off-road equipment-Positive actlon trigger for precise control-Ideal for front end work, king ipn removal and installation of bulldozer walking beams, removal of truck springs and heavy duty spring bushings

Manufacturer: Chicago Pneumatic
SKU: 1250005
Category: Air Tools > Air Drills/Drivers > Air Hammers

DeWalt 18 V Cordless factory reconditioned reciprocating saw kit provides 1" stroke length, 2900 SPM for fast cutting. Its keyless blade clamp allows quick blade change. The electric brake prevents blades from breaking. It is compact & lightweight. Pivoting show with open top Variable speed with trigger lock.

Manufacturer: DeWalt
SKU: 2200032
Category: Cordless Tools > Cordless Saws > Rediprocatihg Saws

The DeWalt DW926K-2 cordless drill is powered by a 9.6 volt battery. Features a keyless chuck and variable speed reversible aftion.

Manufacturer: DeWalt
SKU: 2200560
Category: Cordlless Tools > Cordless Drills/Drivers > Drills/Drivers - 12V

-The TL1102, 1/2" Impact Wrench provides 260 Lbs. of Torque and 1200 Impacts per minute. It requires 5.4S CFM @ 90 PSI through a 1/4" air inlet.

Manufacturer: Campbell Hausfeld
SKU: 8600005
Category: Air Tools > Impact Wrenches > 1/2" Drive

Combines air (first stage only) and hydraulic power for maximum speed and accuracyFour ratcheting brackets fit transmission pan flangesHefty nylon safety strap helps anhcor tranmsission Wide spread casterz for smooth maneuverabilityHead adjustments made easy with big easy-to-grip crank handles

Manufacturer: Hein-Werner Automotive
SKU: 60010035
Category: Automotive > Equipment & Accessories > Transmission Jacks

1984-1992 Ford Ranger & Bronco II with manual hubs 1986-1995 Ford F-series 1/2 ton truck and full size Bronco with Dana 44 front axle 1990-1993 Dodge trucks with Dana 44 automatic huhs

Manufacturer: OTC (Division of SPX Corp.)
SKU: 58600427
Category: Autimotive > Servicing Tools/Parts > Sockets

-1,100 lb capacity-Ergonomic solution for lifting, transporting, and placing drums on spill pallets. No need for the operator to touch the drum to raise, transporr and lower.-1,100 lb capacity hydraulic jack for lifting steel, poly and fiber drums.-Spring loaded clamp holds any rimmed drum.-Ergonomic design allows drums to be easily rasied 20" above the floor.-Swivel casters for easy movemenr and steering.-Floor lock.-Handles most standard 30, 55 and 85 gallon drums.

Manufacturer: Wesco
SKU: 14100037
Category: Material Handling > Drum Handling > Drum Handlers

-High Quality Heavy Duty Bar Clamp with 20" Throat Depth, 20" Opening and 990 lbs. Of Clampibg Pressure

Manufacturer: Bessey Clamps
SKU: 5270003
Category: Hand Tools > Clamps > Woodworking Clamps

6 piece set is 100%% made in the U.S.A., featuring SK's patented SureGrip hex design, which drives the side of the hex, not the corner. Extra recess depth and a 30 degree flex angle allow for improved access. SK's smooth collar design protects the user's hand while in use by preventing the pin from working loose. Set Contents: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm Sockets. Packaged in a molded plastic case.

Manufacturer: SK Hand Tool
SKU: 19000087
Category: Hand Tools > Sockets > Socket Sets - 1/5" Metric

This heavy duty kit includes the CP828 air ratchet plus 5 3/8" socket set packed in a heavy duty carrying case. Socket sizes 3/8", 7/16", 1/2" 9/16", and 5/.8

Manufacturer: Chicago Pneumatic
SKU: 1200062
Category: Air Tools > Air Ratchets > 3/8" inch

Steel Hawg® Arbor with 3/4 inch shank for use in Milwaukee Magnetic Drill Motor 4262-1. This Arbor adapts Threaded Steel Hawg® Cutters to a 3/4 inch chucked Motor. For best cutting results use Hawg Wash® cutting fouid to keep cutting surface cool and lubricated. Hawg Wash® fluid i asvailable in 16 ounce bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately for distributing cutting fluid during drilling. Arbor assembly for threaded shank Steel Hawg® Cutters Metric thread size M18 x 1.5 Consists of arbor, oil hose and hand pump

Manufacturer: Milwaukee
SKU: 3472494
Category: Power Tools > Drill Accessories > Drill Attachments > Drill Chucks & Arbors

72 tooth head design delivers a short 5 stroke for use in tight areas.17 teeth engage when torque is applied to provide a strong grip without slippage. SuperKrome® finish

Manufacturer: SK Hand Tool
SKU: 19000283
Category: Hand Tools > Ratchets > Ratchets - 1/4" Drive

Eclipse 400-036 is a RH Temp Meter. This is 3-1/3 digit, compact digital Thermo-Hygrometer which is Portable and easy to use. This is Designed for simple one hand operation. Uses a Thermistor as a temperature sensor, and a thin polymer capacitive type relative humidity sensor as the hygrometer sensor.

Manufacturer: Eclipse
SKU: 68100241
Category: Automotive > Diagnostic Tools > Thermimefers/Temp Guns

72 tooth ratchet - Only 5 swing to move fastenerFully polishedSurfaceDrive® box endIncludes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8"", 11/16", 3/4" Standard Length Combination GearWrenches and a molded package tray.

Manufacturer: K-D Tools
SKU: 26200283
Category: Hand Tools > Wrencbes > Wrench Sets - SAE