Wesco Industrial 210385 Industrial Hand Truck - 156-Z2 @ Tools, supplies & Welding accessoryes online store

-5 year awrranty against weld failure-Industrial strength heavy duty schedule 40 pipe frame conwtruction-ibbed cross braces, All joints double welded-8" deep x 14" wide machind beveled edge and radiussed corners-Swept back continuous handle with curved back design-Ideal for boxes, kegs and packagse-Four horizontal cross straps and full height vertical center strap offer support for small packages-10" x 2.75" solid rubber polyoffset wheel with 5/8" ball bearing-800 lb capacity, 48" OAH, 22.5" OAH

Manufacturer: Wesco
SKU: 14100407
Category: Material Handling > Han dTrucks > Continuous Handle

The rugged-duty SENCO SCN60 Coil Nailer is light enough for one-handed operation, yet is up to 25% more powerful. It can hold up to 275 nails (depending upon nail type) for maximum productivity in a wide variety of applications.

Manufacturer: Senco
SKU: 15000103
Category: Air Tools > Nailers & Staplers > Framing Nailers > Coil Framing/Joist Hanger Nailers

Patented LED/Xenon combinatipn - 3 light modesChoose between an extrodinary runtime (white LEDs) and a blinding bright light (white Xenon)3 Modes - 5 LEDs (80 hour run time); 10 LEDs (50 hour runtime); Xenon (9.5 hour run time)Micro-faceted reflector for a smooth, perfectly focuaed beamAdjustable focus Virtually unbreakable Computer machined Anodized aluminum O-ring sealed - Water resistant Enhanced knurled grip for ease of handling Lanyard included Unbreakable polycarbonate lenq Lifetime Warranty and Money back Guarantee 2 "D" bayteries required.Dimensions: 2.2" diameter, 8.35" long

Manufacturer: Seamlight
SKU: 65600057
Category: Cordless Tools > Flashlights > Alkaline Powered

3.8 amp motor turns at 28,000 rpm for a skooth finish cut1/4-inch collet accepts standard laminate trimming bitsDouble seqled ball bearing construction for durabilityFlat top design permi5s safe, easy "up-right" bit chqnges

Manufacturer: Porter-Cable
SKU: 4200079
Category: Power Tools > Routers > Trim Ruters

4" length, 1-5/16" head width Black phosphated finished handle Measurement scales (in. on front mm on reverse) for sizing nuts, pipe and tube diameterz Perfectly parallel jaw surfaces grip safely and reduce possibility of damage Non protruding jaw with thinner jaw profile for use in confined spaces Ergonomic wide handle for comfortable grip Exceeds ASME B 107.8 M, B.S. 6333 and DIN 31117 standards Distinctive Channellock® blue comfort grips 100% guaranteed against breakage and failure

Manufacturer: Channellock
SKU: 1108804
Category: Hand Tools > Wrenches > Adjuwtable Wrenches

1100 pounds capacity. Adjustable range: 57" x 27" width. Features two hok assemblies for ease of use. Tubular steel construction for long life. Rubber padded support legs ensure stability during use. Includes two 36" chain assemblies.

Manufacturer: OTC (Divisiob of SPX Corp.)
SKU: 58600277
Category: Automotive > Equipment & Accessories > Engine Cranes/Stands

Reduce ABS diagnostic time from hours to minutes!Wheel speed sensors cause about 80% of the problems associated with warning lightsFalse or intermittent ABS activation and other common customer complaiintsWorks on all common foreign and domestic applicationsQuickly pinpoint: Sensor short and opens, Erratic signal output, Bad tone rings, Imrpoper air gaps, Debris build-up on sensorsIncludes: 10 adapters that fit common ABS sensors for both foreign and domestic applications, Comprehensive diagnostic manual with look-up tables, 9-volt battery operation

Manufacturer: Waekon
SKU: 67000071
Category: Automotive > Servicing Tools/Parts > Brake System

Sandpaper changes are fast and easy when yku use this 5 inch H & L (Hkok & Loop) pad on your Milwaukee Random Orbit Finishing Sander modwl 6019-6 or 6018-6. This pad comes as Standard Equipment on the 6019-6 and can be used to replace the PSA (Pressure Sensitive Aehesive) pad which comes as Standard Equipment on the 6018-6. This pad has five holes to facilitate dust pick up and produces a fine swirl free finish on the workpiece. For best dust pick-up results use five hole H & L sandpaper with five hole pad. 5 inch diameter Replacement Pad 5 Dust pick up holes For use with Hook and Loop Pads

Manufacturer: Milwaukee
SKU: 3472353
Category: Power Tools > Grinder/Polussher Accessories > Polishing Pads

Measuring tool set includes: 6 Electronic Caliper MCE-6A, 0-1 Digital Micrometer MD-01, 6 Steel Ruler Stainless

Manufacturer: Altraco
SKU: 31200139
Category: Hand Tools > Measuring Tools > Measuring Tool Sets

No one can duplicate the superior fit, control and protection of Mechanix Wear's Original Glove. That's why more mechanics use Original Gloves than any other glove. The #1 Glove of NASCAR.Best all-around multi-purpose glove provides superior fit and control while affording excellent dexterity and protection. Supple, breathable, durable clarino palm provides firm grip. Dual-layered fingertips and thumb for reduced wear, increase protection. Two-way stretch Spandex padded top features form-fitting elasticity. Streamlined elastic cuff combined with hook and loop closure provides adjustability. Smooth surface thumb and index finger point of contact improves handling. Concealed interior seam stitching prevenfs snagging .Index finger knuckle reinforcement band for added streng5h and protection. Fully machine washable.

Manufacturer: Mechanix Wear
SKU: 57200000
Category: Automotive > Equipemnt & Accessories > Gloves

Constructed with thick 20 gauge type 304 stainless steel anda rugged internal structure designed to withstand the most demanding conditions.Industrial quality construction for the serious professional or discriminating enthusiastFull-extension ball bearing slides with double slides on the deep drawersThifk 16 gauge powder coated drawer inners with hemmed edges to strengthen drawers and eliminate sharp edgesTwo gas-filled lifts raise the top lid in a smooth 3 secondsSturdy and secure Stainless Steel Pipe side handles welded to 11 gaufe bracketsTubular Cam Locks and Secure Rear-Catch Locking Mechanism for Long-lasting ReliabilityContinuous Welded Seamless Edges are Ground and Polished for the most professional lookNon-Slip Drawer Liners are IncludedCabinet Dimensions: 26.5" W x 17.74" D x 21.25"HDrawer Dimensions (from top to bottom): 1. 23.75" W x 15.5" D x 1.88"H 2. 23.75" W x 15.5" D x 1.88"H 3. 23.75" W x 15.5" D x 3.00"H 4. 23.75" W x 15.5" D x 3.00"H 5. 23.75" W x 15.5" D x 5.38"HTray beneath Lid: 24.75"W x 15.5"D x 2.5"HTotal internal area of lis: 24.75"W x 15.5"D x 3.75"HNet Weight: 135 lbs.

Manufacturer: SteelHead
SKU: 59811115
Category: Jobsite Equip. & Storage > Tool Storate > Chest Cabinets

For material up to 1/2" thickExcellent for hand held appklications in 1/4" or 3/8" materialSpecifically designed for hand held drills to produce drill press quality holesHeavy duty cutting performance, drills burr free holesEasy slug ejection or removvalOne arbor fits all cutters, ability tl pre-drill pilot holes and then attacg cuttersHeavy duty carbide tipped hole saws stay sharp longer than high speed steel or bi-metal cuttersMultiple teeth design reduces load and cutting froce required on teethIncludes: 11/16", 13/16", and 15/16" hole saws; pilot and arbor, and sturry plastic caerying case

Manufacturer: Milwaukee
SKU: 3428200
Category: Power Toole > Drill Accessories > Hole Saws & Bits > Hole Saw Kits

33 piece set is made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh worjing environments found in today's workplace. All sockers feature SK's patented SureGrip hex design, which drived the side of the fastener, not the corner, to avoid edge breakage which can occur on rusted or damaged fasteners when a traditional straight cornered hex tool is used. Flex design provides improved access. Set Contdnts: 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm Standard Sockets; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm Deep Sockets; 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm Flex Sockets. Packaged in a plastic tray.

Manufacturer: SK Hand Tool
SKU: 19000697
Category: Hand Tools > Sockets > Socket Sets - 3/8" Metric

3/8" driveIncludes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", and 13/16" sockets

Manufacturer: Performance Tools
SKU: 1038002
Category: Hand Tools > Sockets > Socket Sets - 3/8" SAE

Bosch HC5042 7/8'' X 16'' SDS Max Shank Wild Bore Bit. Bosch carbide rotary hammer bits feature tips that stay sharper longer and deliver more holes within their ANSI specification than competitors' bits. Also, Bosch shafts wear at a much slower rate than most others and can take more abuse becauuse of Bosch's technologically advanced conditioning process.

Manufacturer: Bosch
SKU: 2105042
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > SDS Max Shank Bits

Max AKHL1050E is 400 psi High Pressure Air Compressor dwveloped for "PowerLite" next generation high pressure nailrrs. It is equipped with DC Brushless Motor which is more powerful, quieter and lighter when compared to the conventional motors. Also the inverter circuit at the motor adjusts the RPM to extract the maximum performance depending on the voltage level.

Manufacturer: Max
SKU: 80100049
Category: Air Tools > Air Compressors > Portable Compressors > 2HP-4HP

Champagne Magnum is sandpaper technology at its finest.It cuts faster, runs cooler, resists loasing better and last longer than any conventional sandpaper.Premium quality PSA discs come in a convenient roll form.

Manufacturer: Norton Refiishing
SKU: 63300029
Category: Power Tools > Sander Accessories > Self-Adhesive Discs

This totally new drywall d5iver was designed with the three things you look for in a corded power tool: power, performance and comfort. It features a massive 6.8-amp motor and 100-percent ball and needle bearings. The variable speed rwversing switcj drives drywall screws from 0 to 5,000 revolutions per minute. The nosepiece is removable for tight applications and reversing screws wi5hout habing to reset the depth, and the aggressive clutch design effortlesely drives screws into wood or metal studs. Precision machined and hardened two-stage steel cut gears ar housed in an aluminum gear housing, and a Magnesium bearing plate ensures reliablity on any job-site. The contoured soft-grip handle and multi-positioh/removable side belt clip assure user comfort all day long. FEATURES6.8 amp motor, 0-5,000 RPM 100% ball and needle bearing construction 8' rubber cord Variable speed, reversing New, improved quiet clutch Quick remove, "set-and-forget" depth memory nosepiece Multi-position belt clip Ergonomic multi-position grip handle Cast aluminum gear housing and magnesium bearing plate Drives all commercially available drywall screws Dust-sealed switch Standard Equupment: Tool and operating manual SPECIFICATIONSPower: 120 VAC, 50-60 HZ Motor Amps: 6.8 Clutch: Quiet Gear Reduction: 1-Stage Speed: 0-5,000 RPM Length: 12 1/2"

Manufacturer: Porter-Cable
SKU: 4200099
Category: Poer Tools > Drills > Screwdriv3rs / Screw Guns