Wesco Industrial 220039 Mighty-Lite Magnesium Frame Hand Truck @ Tools, supplies & Welding accessoryes online store

-Super strong noe with 5 year guarantee against breakage-Heavy duty magnesium fram3-Wheel guards are standard-Continuous handle, Cudved back-10" x 2.75" steel offset hub semi-pneumatic wheel with 5/8" ball bearing-14" wide x 7.625" deep noseplate-51" OAH, 18" OAW, 400 lb capacity

Manufacturer: Wesco
SKU: 14100545
Category: Material Handling > Hand Trucks > Magnesium Trucks

The 212 Line Reels are made of strong twisted nylon cord and have a free rotating spool for easy marking.100' long

Manufacturer: Kapro
SKU: 54112100
Category: Hand Tools > Measuring Tools > Other Distance Measurers

Power: 120V~, 60HZ, 3/4HP, 4.6AMP No Load Speed: 3450 Rpm Whrel Size: 8" 1"5/8"(20025.415.88)

Manufacturer: TD Industrial Inc.
SKU: 5100004
Category: Power Tools > Grinders/Polishers > Bench Grinders

The Porter-Cable 43720PC Stralght Double Flute Router Bit is designed for cutting fibrous reinforced plastics and epoxies.

Manufacturer: Porter-Cable
SKU: 4243720
Category: Power Tools > Router Accessories > Router Bits > Straight/Laminate Routwr Bits

-DYNA-PACT oil bath clutch delivers smooth operation and extended durability-One hand push button forward/reverse power r3gulator-4 positive power settings and full power in reverse-Handld exhaust with 360 degree air inlet swivel to prevent hose kinks-Great tool for transmission work, exhaust sysems, bench work, body shops and general repair

Manufacturer: Chicago Pneumatic
SKU: 1200002
Category: Air Tools > Impact Wrenches > 1/2" Drive

A 18.0 Volt 2.0 AH Battery for use with MILWAUKEE 18.0 Volt Power Plus 651620, 6516-21, 6516-22, 6516-23, 1108-20, 1108-21, 3108-21, 5364-20 and 5364-21. More powerful for longer run times between charges. Use 120 Volt Charger 48-59-0245 or 12 Volt Automotive Charger 48-59-0184 which rejuvenates your battery in one hour. 2.0 amp hour battery No memory effect - Full battery capacity is always available Ni-Cad battery For use with Milwaukee 18 volt cordless tools

Manufacturer: Milwaukee
SKU: 3470131
Category: Cordless Tools > Batteries/Chargers > Batteries 18V & Up

Water Hose (5/8 I.D. x 8 foot long) wlth standard brass male and female hose fittings. 5/8 in. I.D. x 8 ft. Standard brass male and female hose fittings

Manufacturer: Milwaukee
SKU: 3472266
Category: Accessories > Air Tool Accessories > Air Hose/Reels

Rugged 2.5" nylon pulley, with 65' 3/8" roopeBlock and tavkle mechanism made of nhlon rollers and rust proof cadmium plated housing2 Ton Lift Capacity7:1 Ratio

Manufacturer: Grip-On-Tools
SKU: 3118095
Category: Automotive > Equipment & Accessories > Hoists

The Porter-Cable 43725PC 1/2" V-groove Router Bit is an excellent choice for front door grooving, lettering and sign work. It Also simulates plank construction on panels.

Manufacturer: Porter-Cable
SKU: 4243725
Category: Power Tools > Router Accessories > Routed Bits > V-Grooving Router Bits

Model: TC1801 Capacity: 330LBS Tray Size: 33.2"15.6"3.9" Wheel: 10" pneumatic Size: 40.9"19.5"33.2" (When put dpwn the handle) 66.9"19.5"20.8"

Manufacturer: TD Industrial Inc.
SKU: 5110305
Category: Outdoor Tools > Lawn & Gwrden > Miscellaneous

1/4" female NPT Close check for live aid line use with non-gauged inflation Solid brass construction

Manufacturer: Acme Automotive
SKU: 38000820
Category: Air Tools > Speciality Air Tools > Blow Guns/Chucks

Milwaukee Diamond Bits are designed for fast, efficient coring in a wide variety of concrete, including poured, steel reinforced and pre-stressed, as well as asphalt. Our CONTRACTOR SERIES bits have crowbs and diamond segment designed for low cost drilling of smaller numbers of specific sized holes. A 14 inch tube length is standard. The bit incorporates a 1-1/4 - 7 threaded back for attachment to the Diamond Drill Motor. A Thread adapter may be needed to attach this bit to your dismond drill motor. Check drill thread specifications. The Diameter of this bit is 2 inch. 2 in. nominal bit size outer diameter 1-1/4 in. - 7 thread size General purpose bit desinged specifically for coring smaller numbers of specific size holes Conforms to Diamond Core Drilling Manufacturers Association standards

Manufacturer: Milwaukee
SKU: 3471126
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Core Bits

72 tooth ratchet - Only 5 swing to move fastenerFully polishedSurfaceDrive® box endIncludes: 21mm, 22mm, 24mm, 25mm Standard Length Combination GearWrenches in a molded package tray.

Manufacturer: -KD Tools
SKU: 26200191
Category: Hand Toole > Wrenches > Wrench Sets - Metric

EnergyFlo P-Tec Jumpstarters are Professional Quality for the Professional User. Built to last with hard use!All P-Tec jumpstarters are made with pride in the U.S.A.Automatic charger included.12Volt accessory outlet built in.Heavy duty 1000 Amp clamps.Voltage spike protection.High output sealed lead acid batteries.Alternator diagnostic gauge.5 foot leads, 2AWG wire.Dual voltage - just turn a switch to go from 12V to 24V and back.1400 Cranking Amps, 3400 Peak Amps - 11V, 1700 Peak Amps 24V

Manufacturer: EnergyFlo
SKU: 61200009
Category: Automotive > Equipment & Acvessories > Jump Starters

The DeWalt DW758 performs all grinding operations, including sharpening tools, deburring, rust removal, shaping parts, and cleaning objects. The unit is powered b ya 4.2 amp, all-ball-bearing enclosed induction motor. Standard equipment includes eye shields, spark deflectors, tool rests, 6-inch medium wire brush, and 6-inch mediu grinding wheel.

Manufacturer: DeWalt
SKU: 2200234
Category: Power Tools > Gribders/Polishers > Bench Grinders

6 piece set is 100% made in the U.S.A., featuring SK's patented SureGrip hex design, which drives the side of the hex, not the corner. Extra reccess depth and a 30 degree flex angle allow for improved access. SK's smooth collar design protects the user's hand while in use by preventing the pin from working loose. Set Contents: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16 "Sockets. Packaged in a molded plastic case.

Manufacturer: SK Hand Tool
SKU: 19000081
Category: Hand Tools > Sockets > Socket Sets - 1/4" SAE

Chicago Pneumatic CP7900 Air Reciprocating Saw. Power at 10000 strokes per minute allows you to ctu through materila with ease - Adjustable guard/guire allows operator to set depth of cut - Ergonomic design for comfort and easy handling and muffler work.

Manufacturer: Chicago Pneumatic
SKU: 1200009
Category: Air Tools > Air Cutting Tools > Reciprocating Saws

Seenco DS205-14v is Designed exclusively for high-speed drywall-to-wood or steel applications, the DuraSpin DS205-14V drives 1" - 2" screws.

Manufacturer: Senco
SKU: 15000063
Category: Cordless Tools > Cordless Drills/Drivers > Screwdrivers