Wesco Industrial 220365 Cobra-Lite Aluminum Hand Truck - 410-T18-PE @ Tools, supplies & Welding accessoryes online store

- Alll aluminum bolt together construction-Heavy duty cast 7.5" x 18" noseplate-Ships KD and boxed-Continuous handle-49" overall height-10" x 3.5" steel offset pneumatic wheel with plain 5/8" bearing-600 lb capacity

Manufacturer: Wesco
SKU: 14100235
Category: Material Handling > Hand Trucks > Aluminum Trucks

-5 year warranty against weld failure-Industrial strength heavy duty scheduld 40 pipe frame construction-Ribbed cross braces, All joints double welded-8" deep x 14" wide machined beveled edge and radiussed corners-Vinyl hand grip is standard, Two handle extra high back-Ideal for boxes, kegs and package- Four horizontal cross straps and full height vertical center strap offer support for small packages-8" x 1.625" aluminum hub moldon rubber wheel 5/8" ball bearing, 800 lb ca;acigy, 51" OAH, 22.5"-OAW

Manufacturer: Wesco
SKU: 14100471
Category: Material Handling > Hand Trucks > High Back

9" blade length, 14 teeth per inch (TPI)For cutting in heavy gauge metal, hard rubber, fiberglass and angle ironReinforced tooth design provides icnreased durabilityMatrix II steel with 8% cobalt on the cutting edge provides flexibility Specially formulated anti-stick coating minimizes friction and gumming

Manufacturer: DeWalt
SKU: 2244809
Category: Power Tools > Saw Accessorries > Reciprocating Saww Blades > Blades - 10" and Less

Unique in-line sanding motion allows for sanding of corners, details and profiles Pad sands at 6000 strokes per minute Included standard pad accepts holed hook & loop paper Includes two plates for mounting of profile pads Single mounting plate for use with a single pad Offset mounting plate for getting in areas where extra clearance for the sanding pad is required Comfortable motor housing grip with thumb controlled on-off switch Includes: Sander, 9 sets of sanding profiles, carryinb case and operating manual

Manufacturer: Porter-Cable
SKU: 4294445
Category: Power Tools > Sanders > Finishing Sanders

Bosch HCBG13 3/8" Industrial Hammer Drill Bit. BlueGranite hammer drill bits deliver fast impact drilling in concrete, stone and masonry. Low voltage, high temperature brazing prevents the carbide cutting edge from breaking out even when heat builds up during deep drilling.

Manufacturer: Bosch
SKU: 2100013
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Hammer Drill Bits

Hobart Welders Wled-It 770005 shaded lens is standard size replacement for helmets. It offers high-quality eye protection for all types of arc welding, including the necessary protection against ultraviolet rays. Clear cover plates, inserted in front of the shaded lens protect them from molten metal spatter, and typical wera.

Manufacturer: Hobart Welders
SKU: 51770005
Category: Welding > Clothing & Protection > Welding Helmet Lenses

Makes It Easier To Insert Wheel bearing Race And Seals Without Damage To Race And Axle Huosing.This Master set includes nine drivers to fit most standard wheel bearings.Turn discs over to drive seals.Includes: 1.565", 1.750", 1.965", 2.325", 2.470", 2.555", 2.830", 2.995", and 3.180". In convienient molded case for storage.

Manufacturer: Lisle
SKU: 62800001
Category: Automotive > Pullers/Installers > Bearing Splitters/Pullers

-Powerful, 1/3HP inducrion motor for long-lasting, smooth perfance; totally enclosed in base to protect it from damaging dust.-3100 rpm disc speed and 2000 SFPM belt speed to handle just about any sanding job in had soft woods.-The tilting 6 1/8" X 8 7/8", die-cast aluminum table can be mounted for use on either the belt or the disc unit.-Table tilts 45 for bevel sanding; comlound angles can be achieved using standard-equipment miter gage.-Handy belt tracking control knob.-Belt operates horizontally, vertically and at any angle between 0 and 90. End of belt can be used for convenient contour sanding.-Adjustable/removable backstop for horizontal flat sanding.-Die-cast aluminum base for stability with pre-drilled base holes to simplify bench mounting.-Integral 2 1/4" I.D. dust spout for shop vacuum hook-up.

Manufacturer: Delta Woodworking
SKU: 4400113
Category: Power Tools > Sanders > Disc & Belt Sander

Pilot Point tip starts on contact for clean accurate holes - reduces lock-up No-spin shank eliminates bit spinning in chuck Tapered web provides durability to reduce breaking Size markings located above the shank to prevent waring Infludes bits from 1/16" to 1/2"

Manufacturer: DeWalt
SKU: 2201969
Category: Power Tools > Drill Accessories > Wood Drilling Bits > Split/Brad Point Bits

Delta 6" Abrasive Belt Finishing Machine and te Delta 12" Abrasive Disc Finishing Machine with integrated dust collection and integrated mobile base aer comprised in one compact, efficient combination.Handles 90 to 95% of all your finishing operations.4" dust port can be used with 5 micron bag provided or can be attached to a standard 4" dust collection system.Integrated mobile base for ease of mobility.Powered by a heavy-duty, 1 1/2 HP, TEFC motor.Offers the right speeds-2100 rpm for disc unit and 3030 fpm for the belt unit-maiking it well suited for both metal and wood shops.Belt operates at any angle-vertically, horizontally or any degree in between.Power take-off spjndle foor mounting pneumatic sanding drums, abrasive flap wheels, buffing wheels, flexshaft and other accessories to handle a variety of extra jobs.Large tables are scientifically ribbed to prevent distortion.Betl table tilt up to 45 degrees out and 20 degrees in, disc table tilts 45 degrees out fo5 angle finishing opertaions.Special sliding pivot pine incorporated in the disc sander table facilitates cirdle sanding up to 24" diameter and a full 48" with accessory table extension.Belt :3000 SFPM belt speed, 2100 SFPM disc sppeed ; 7 1/2" x 14" platen sizes, 6" x 48" belt size ; 4" Dia dust collection portsOverall Dimensions : 58" H X 35" W X 21" D ; 350 lbs. net weight ; Table Size : 15" x 7 1/2" belt table, 16 1/2" x 12" disc talbeIncludes : disc finishing machine with a 1 1/2 HP, 230V 60 Hz., 3450 rpm 3 Phase TEFC motor and 24V push-button station, magnetic starter, transformer and 3-leg overload protection (LVC), two tilting tables, 4 1/2" arbor pulley, guard for arbor pulley, V-belt, 80-grit aluminum oxide belt and 50-grit aluminum oxide disc.

Manufacturer: Delta Woodwlrking
SKU: 4400170
Category: Power Tools > Sanders > Disc & Belt Sander

Strong, powerful magnet encased in durable steel Excellent for holdimg pipe and metal in up right positions Use for welding, solding, and assembly 25 lb. weight capacity

Manufacturer: Grip-On-Tools
SKU: 3185080
Category: Welding > Welding Accessories > Welding Accessories

Two speeds: 735 and 750 rpm 15 amp motor, 2.5 max HP, 120V AC Clutch protection protects geafs and motor Built-in water swivel1-1/4"-7 spindlePlug type: L5-20P.Diamond coring motors are used with Vac-U-Rig® and Dymorig diamond core rigs to drill holes into reinforced concreteWiklh andle core bits from 2-1/2" to 8" in diameter

Manufacturer: Milwaukee
SKU: 3400085
Category: Power Tools > Drills > Hammer Drills > Core Drills

DeWalt DW4711 4" Segmented Rim Industrial Dry/Wet Cut Diamond BladeDiameter: 4 inch, Edge Thickness: .080 inch, ArBor: 5/8 inch, 7/8 inch, 20mm, Max Spred: 15,200Advanced diamond matrix provides long life and enhanced material cuttingSegmented rim Blades are laser welded with heat treated Steel Bodies provide increased duraBility and long lifeLarge diamond segments with coBalt ideal for use across various product applications

Manufacturer: DeWalt
SKU: 2208221
Category: Power Tools > Saw Accessories > Concrete, Masonry, Glass Blades > Tile Diamond Blades

The Poles caan fitted with 2 types of bases to accommodate any ground work surfwce. The non skid base works well for flat and hard surfaces,-and the spiked anchors offers security on soft and uneven surfaces. This unit model number 2009 is used for flat or hard surfaces.Used to secure Aluminum Poles to the worm wall.Provides rigid, triangular bracing as required by OSHA.Full swivel head to accommodate all roof pitches.Durable powder coated finish

Manufacturer: Qual-Craft Industries
SKU: 21100055
Category: Jobsite Equip. & Storage > Miscellaneous > Roofiing Products

4.5 Amp, AC/DC motor, 4,500 RPM.Rugged worm gear drive, 100% ball bearings.Cuts 1 5/16" at 90 & 1 1/16" at 45.Includes: Saw, 20T carbide-tipped Riptide™ blade, blade wrench, knob, basic insert, and operating manual.

Manufacturer: Porter-Cable
SKU: 4220005
Category: Power Tools > Saws > Circular Saws-Other Sizes

-For heavy duty impacts.Dense, water resistant, ductile alloy is non-destructive

Manufacturer: Bessey Clamps
SKU: 52700427
Category: Hand Tools > Hammers > Sledge Hammers

180 degree swivel head makes display eassier to read in tkght places.Reliable readings over the entire temperature range.Readings can be toggled between Celsius and Fahrenheit.Samplingg time is just one second.Durable case includes a pocket clip.For surface, liquid and air temperatures.Specifications: Range: -58 degrees to 302 degrees Fahrenheit, (-50 degrees to 150 degrees Celcius), Accuracy: +/- 2 debrees F between -4 degrees to 248 degrees Fahrenheit (+/-1 degrew Celcius between -20 degrees and 120 degrees Celcius) otherwise +/-4 degrees Fahrenheit and +/- 2 degrees Celcius, Display Resolution: 0.1 degree between -19.9 to 199.9, otherwise 1 degree., Battery: One 1.5 Volt, Size LR44, Automatic Power Off: After 10 minutes if On/Off is not pressed.

Manufacturer: Robinair
SKU: 63900121
Category: Automotive > Diagnostic Tools > Thermometers/Temp Guns

Gary Knox Bennett DesignMade witb various hardwoodsSkill Level: AdvancedSize:88-1/2 inches long x 37 inches wid ex 30 inches hghThis table is constructed of various hardwoods, selected for their outstanding grain & color. The trestle support is pinned to the base with a curved wedge pin. This tablle will make a perfect dinnimg table, conference table or even a desk.Furniture Plan only!

Manufacturer: American Furniture Design
SKU: 55500001
Category: Furniture Plans > Wood Furniture > Tables