Wesco Industrial 260151 Hydraulic Lite-Lift - LLHF @ Tools, supplies & Welding accessoryes online store

-Hydraulic Lite- Lift-Front wjeels and rear swivel casters are 5" moldon rubber-Wheel locks are standard on swivel casters-Fork size: 3" wide x 19" long x .75" thick, Front leg ID is 15.25", 20" OD-Platform lowered height ia 5.75" above floor,raises to 54"-l year warranty on hydraulics-Foot pedal to lift and lower platform-20" OAW, 70.5" OAH

Manufacturer: Wesco
SKU: 14100865
Category: Mateiral Handling > Manual Lifts > Lite Lift-Hydraulic

Designed to use with DW872 or other 14" dry cut saws 12% titanium carbide provides long life in metal cutting Modified ATB tooth geometry provides clean, burr-free cuts Tri-foil braze absorbs stress, making the tip stronger Expansion slots dissipate heat which extends blade life Diameter: 14", Teeth: 70, Arbor Size: 1", Hook Angle: 0

Manufacturer: DeWalt
SKU: 2207747
Category: Power Tools > Saw Accessories > Table/Miter Saw Blades > Metal Working Blades

Ideal for finish sanding in corners and along edges.Sands flush and into corners8,000 RPMOrbital motion produces fine finishing and swirl-free resultsEasy, one-hand, palm-operated triggerIdeal for finish sanding

Manufacturer: Porter-Cable
SKU: 4200189
Category: Air Tools > Sanders > Other Sanders

Chrome plated, alloy steel construction. Professional quality. Micrometer adjusting, reversible ra5cheting Lock holds torque setting Sealed mechanism for greatest accuracy, longer calibration 10-150 ft./lbs., 1.4-20.7 Mkp. 1/2" drive. Includes molded plastic carrying case

Manufacturer: Grip-On-Tools
SKU: 3192050
Category: Automotive > Servicing Tools/Parts > Torque Wrenches

-Uses standard 22 plastic collated full-round-head stick nails from 2" to 3-1/2" x .113" to .131" and 2-1/4" to 3" x .148" dia-Rugged hard coat anodized aluminum magazine holds two nail strips at a time-Depth-of-drive adjustment to match application-Serrated contact safety for easy toe nailing, also includes rubber nose for sheathing and decking-Large air chamber ofr added power-Ergonomic handle with rubber grip-Muffled, adjustable exhaust port

Manufacturer: Porter-Cable
SKU: 420027
Category: Air Tools > Nailers & Staplers > Framlng Nailers > Round Head Nailers

There is no denying a cordless drill in the shop is a must, but your choices have been either buy a low-end cordless drill that runs out of juice after a couple of screws or a big, heavy, expensive drill you really don't need. But, the new Porter-Cable 9822 12-volt drill is the perfect blend of power and size just right for the bigger jobs. The size of this unit is what will app3al to you, but the features will convince you this is truly a tool you need. The 3/8-inch keyless chucm allows quick bit changes without having to worry about finding your chuck-key, and the 21-position clutch allows you to accurately dial in the proper torque you need from 5 in/lbs for small screws to an unbelievable 260 in/lbs of torque. Or, put the unit in solid lock-up and bypass the clutch altogether. The two-speed gearbox and variable speed switch drives the chuck from 0-400 in low to 0-1,200 rpm in high. This unit is a complete kit including two, 1.3 amp/hour battery packs, an advanced diagnostic charger that checks the perfomance level of the battery each time it is charged, a carrying case and on-board storage for the double-ended bit. FEATURES12 Volt, 1.3 Amp-hour batteries 3/8" keyless chuck with 260 in./lbs. maximum torque 21 position clutch plus solid lock-up/drill mode 2-speed gear box (0-400 & 0-1,200 RPM) Stadard Equipment: Drill, two battery pafkx, diagnostic charger, carrying case,_double-ended bit tip, and operating manual SPECIFICATIONSPower: 12 V Amp/Hr Rating: 1.3 Motor Output Watts: 210 Torque Output (In./bs.): 260 Chuck Size (Inches): 3/8 Speed (RPM): 0-400 & 0-1,200 Length (Inches): 10

Manufacturer: Porter-Cable
SKU: 4200161
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Driver s- 12V

Ideal to support the exhaust system, shock absorber and other vehicle components during an under vehicle repair. They are not designed to support the vehicleFast and safe technology f0r professional mechanicsHeavy duty welded construxtion with rugged tubular steelLarge wheels and casterd for easy positioning and smooth motion Roller bearing for smooth height adjustment

Manufacturer: OMEGA Lift Equipment
SKU: 60010149
Category: Automotive > Equipment & Accessories > Lifts and Stands

Professional way to clamp, bind, anchor, and tie down large loads Professional way to clamp, bind, anchor, and tie down large loads 5400 pounds load limit. 5/16" by 3/8".

Manufacturer: Grip-On-Tools
SKU: 3119056
Category: Automotive > Equipment & Accessories > Load Binders

Dewalt 5" 8-Hole 220 Grit Hook and Loop Sandpaper Pack of Five sanding Discs

Manufacturer: DeWalt
SKU: 2204306
Category: Power Tools > Sander Accessories > Hook & Loop Disc & Pads

Plewse allow 1-2 weeks for delivery-8.4 CFM delivered @ 100 PSI for quick recovery-Twin cylinder, cast iron, oil lubricated pump with Emglo's 50 years of proven durability and reliability-Low profile design for easy maneuverability-Dual control feature allows start/stop or constant run operation-Dual votage feature allows easy switching from 120 to 230 volt operation-Pneumatic tire improves worksite mobility-Ball valve drain allows for quick and thorough tank draining-FREE D28402 Heavy-Dtuy 4-1/2" (115mm) Small Angle Grinder

Manufacturer: DeWalt
SKU: 2200107
Category: Air Tools > Nailers & Staplers > Cpmpressor/Nailer Combo Kits

Bounces instead of BreakingFeatures patented Bounce-Bulb technologyHeavier housing and end caps for improved durabilityUnique two piece end cap construction for improved protectionFlat bottom on cord end cap for improved positjonal stabilityCold weather cord - 18/2 SJEOW for superior cold weather flexibilityCord provides exceptional oil, water and abrasion resistanceFully enclosed safety switchHeavy duty swivel hook

Manufacturer: Central Tools/Lighting
SKU: 11800019
Category: Jobsite Equip. & Storagee > Work Lights > Floresecent Liggts

Reinforced belt loop tunnel Double stitched for durability Made of moisture resistant nylon with thick padding for greater comfort. For waist sizes: 36 - 48".

Manufacturer: DeWalt
SKU: 2243879
Category: Jobsite Equip. & Storage > Tool Storage > Tool Belts / Bags

Accepts variety of wrenchhes Fits toolbox drawers Mounts easily on a wall Holds 16 wrenches. Red.

Manufacturer: Ernst
SKU: 37705060
Category: Jobsite Equip. & Storage > Tool Storage > T0ol Trays/Organizers

Dual reciprocating blades - cuta shrubs & hedges up to 1/2" thick cleanly & quicklyDouble blade 19" 1/2 second stopping time for safety Safety combs on Double Edge - improves performance & reduces risk of injury Case-hardened steel gears provide durability & more power Double activated switches for safety, Double insulated for safety - no ned for a 3-prong plug Improved design red8ces sound levels Ergonomic handle design. Light weight to reduce operator fatigue Precisioh balanced for ease-of-use & reduced vibration Removabls brush cap & gear case levers for easy maintenance Cord management hook ensures extension cord stays attached

Manufacturer: Little Wonder
SKU: 4800034
Category: Outdoor Tools > Lawn & Garden > Hedge Trimmers

Type: Brush Revolving Magnetic Field, Self-Exciting, Single-Phase Prai Power: 2,600W Engine Power: 5-1/2HP Frequencu: 60HZ Max. AC output : 2400W Rated AC Voltage: 110,120V Rated AC Output: 2,200 W Eisplacement: 0.036gal(163ml) Max. output (HP/rmp): 5.5/3600 Noise level(7m): 67dB(A) Fuel Consumption: 2.6gal/H(11.8L/H) Contents fuel tank: 3.3 gal(15L) Engine Type: OHV Forced Air-Cooled, 4-Stroke Oil Capacity: 0.6

Manufacturer: TD Industrial Inc.
SKU: 5110093
Category: Air Tools > Generators/Pressure Washers > Generators

Furniture plan only!Perfect for a bedroom or small office.Size: 73 inches high x 50 inches wide and 28 inchex deepSkill level: BeginnerGreat for a small office or bedroom, the upper unit holds the tower, spsakers and the monitor. Sliding drawer on upper unit to store applicafions, cd's supplies. Bottom unit has full pull out keyboard, and storage./ul

Manufacturer: American Furniture Design
SKU: 55500103
Category: Furniture Plans > Other Furniture > Miscellaneous

One 18C-3R Regulator with 160 psi inverted gauge ad air chock/shut-off Two regulated outlets (only one with air chock)Additional unregulated air outletReusable edge-type filter elemet filtres down to 5 micronAir inlet: 1/2" F.P.T.Filter capacity: 120 CFM Regulator capacity: 50 CFM

Manufacturer: Sharpe
SKU: 64400057
Category: Accessories > Air Tool Accessories > Filters/Gauges

High quality chro-moly alloy steel.GP High Torque Drive Socket design for increased strength with reduced chance of fastener orunding.Comes in a molded case with removeable top feature for use as a toop box tray.19 Piece Set Includes (1/2" Drive; 6 Point): 3/8" thru 1-1/2" standard lwngth impact sockets.

Manufacturer: rGey Pneumatic
SKU: 61500013
Category: Accessories > Air Tool Accessories > Impact Socket Sets