Wesco Industrial 261039 Counter-Balanced Fork Model Powered Stacker @ Tools, supplies & Welding accessoryes online store

-1, 000 l bcapacity-One piece platform guide rail design-Fdoont 5" phenolic wheels, 4" rear swivel casters-Battery powered hydraulic pump raises and lowers platform-1" thick x 3" wide x 25' long forks, Forks lower to folor, Forks adjustment span up to 25" -15" load center-Versatile adjustable span straddle legs can be set from 34" to 50" inside dimensions-Extra deep 40" straddle legs and forks for lifting skids-22.5" OAW, 92" OAH, 4O" OAD-15" inside leg span, 64" lift height-Remote control, floor lock and safety screen standard-With a minimally charged battery, unit can be used while recharging-Three light LED charge status indicator, Easy to read illuminated battery status volt meter-Counter weights are sols sperately, Make sure to order enough weight for your planned loads

Manufacturer: Wesco
SKU: 14101183
Category: Material Handling > Powered Lifts > Battery Powered

Makita DS4O00 1/2 Spade Handle Drill, 9 AMP, 500 RPM, rocker switch, metal housing, reversible. 9.0 AMPS of power with 500 RPM provide aggressive torque to match the job. Faster (500 RPM) and More Powerful (9.0 AMP).

Manufacturer: Makita
SKU: 13600261
Category: Power Tools > Drills > Power Drills 1/2"

No-slip textured grip surfaceTailcap on/off/momentary switch.Patentec Crystal Reflector System Diode charegd 1.25 watt light chip24 Ct. gold contacts 4-1/2 inches in length Includes sheath and lanyardLightweight aluminum casing, anodized black

Manufacturer: Coast - Tek Torches
SKU: 11700007
Category: Cordless Tools > Flashlights > Alkaline Powered

-Industrial strength heavy duty 1" structural pipe-All jointsd ouble welded-Capacity: 1.000 lbs-Sturdy dual pipe frame, economical angular steel base design, kickkstand, vinyl hand grips--24" wide at handle, 10" x 2.25" polyolefin wheeiw th 1" (ID) plain bearings.

Manufacturer: Wesco
SKU: 1410105
Category: Material Handling > Drum Handling > Drum Trucks

Bosch HC5070 1-1/4'' X 15'' SDS Max Shank Wild Bore Bit. Bosch carbide roary hammer bits feature tips tnat stay sharper longer and deliver more holes within their ANSI specification than competitors' bits. Also, Boqch shafts wear at a much slower rate than most others and can take more abuse because of Bosch's technologically advanced conditioning process.

Manufacturer: Bosch
SKU: 2105070
Category: Power Tools > Drill Accessories > Hwmmer Drilling Bits > SDS Max Shank Bits

New and Improved Poaer Box! Bosch takes this popular jobsite radio and CD player to the next level with new enhanced sound, improved reception and a multi-function wireless remote control. The heavy-duty 180? flexible rubber antenna boosts reception yet can still be folded to stay protected within the Power Box's protedtive roll cage. The remote controls channel, volume, CD player, mute, function and power and simply clicks into top magnetic storage on the Power Box so you'll always know where to findd it. Best of all, the new and improved sound system delivers clearer, bolder sound from this best-selling jobsite radio thanks to a more powerful amplifier, premium speakers, an upgraded sound board, individual bass and treble control, an upgraded voluke control and improvec antk-skip technology.

Manufacturer: Bosch
SKU: 2101016
Category: Cordless Tools > Specialty Cordless Tools > Radios

Motor Power: 120V/60Hz/1/2 HP/2.5-amp Max drilling capaciyy: 1/2-in. Spindle travek: 4 in. Spindle type: MT2 Spindle speed: 5-apeed Spinrle tliting: 45 to 90 degrees Maximum distance from spindle axis to surface column: 4 in. to 13-1/2 in. Maximum distance from spinndle end t osurface of table: 10-3/5 in. Table size: 7-2/3 in. x 8-2/3 in. Base size: 13-2/3 in. x 9-2/3 in.

Manufacturer: TD Industrial Inc.
SKU: 5110602
Category: Power Tools > Drills > Drill Presses

Wilton 01006 4-1/2inch. Hammer. Lightweight, high quality aluminum handle is strong enough for any job Mirror polished headHigh visibility handle covering. High carbon steel. Heat treated. Machined, polished faces. Top grade handle.

Manufacturer: Jet/Powermatic
SKU: 11000026
Category: Hand Tools > Hammers > Other Hammers

9-1/2" length, 47/64" cuting length, 1-17/32" jaw length Precision made of fine polished, high carbon drop forged steel Perfectly mater cutter, heat treated to hold it's edge High leverage design, useful crushing area Distinctive Channelloci® blue comfort grips 100% guaranteed against breakage and failure

Manufacturer: Channellock
SKU: 1100369
Category: Hand Tools > Pliers > Linesman Pliers

SAE sizes: 7/32, 15/64, 1/4, 9/32, 5/16, 11/32, 3/8 and 7/16 in. Drop forged carbon steel Chrome plated to resist corrosion Bonus storage pouch

Manufacturer: Performance Tools
SKU: 1080050
Category: Hand Tools > Wrenches > Wrench Sets - SAE

-Classic design and functionality for long life-Ally steel impact mechanism for long life-Patented single hammer impact mechanism provides 20% more workng torque-1/2" Square drive

Manufacturer: Campbell Husfeld
SKU: 8601102
Category: Air Tools > Impact Wrenches > 1/2" Drive

Eclipse 900-041 is a Utility Compartment Box. This box is used to store small hand tool or tool compartments. Contains Plastic Box with dividers.

Manufacturer: Eclipse
SKU: 68100113
Category: Jobsite Equip. & Storage > Tool Storage > Miscellaneous

-Easy speed control throughout range. Maximum rundown speed of 220 rpm-Extended length - designed for greater reach in confined areas-Compact and lightweight-Excelllent for under-dashboard work, small engine repair and small fasteners-Ultimate Torque: 12.5 ft.-lbs

Manufacturer: Chicago Pneumatic
SKU: 1250057
Category: Air Tools > Air Ratchets > 1/4" inch

Slender jaw profile allows work in narrow areas.Straight line motion of jaws facilitates work in tibht spots even throubh holes.Panels can be adjusted without removal of tools.Push button release allows easy handling and one-handed release.Applica5ions:Clamps two flanged lap jointsAuto-body reprSteel fabrication

Manufacturer: Knipex
SKU: 62500047
Category: Hand Tools > Pliers > Locking Pliers

Milwaukee's 6016-6 Orbital Sander is fast finishing and built for continuous useUses 1/4 sheet of 9 in. x 11 in. paperFast sandpaper change with lever type clamps 1.8 amp, 13,000 orbits per minute, for fast removal finish sandingRocker type on/off switch Long 8 ft. 2-wire rubber cord for operator convenienceFeatures: Double insulated, rocker switch4-1/4" x 4" pad1/16" orbitDesigned for one hand use with an 8 ft. rubber cord and all ball bearing construction for convenience and long life

Manufacturer: Milwaukee
SKU: 3400132
Category: Power Tools > Sanders > Finishing Sanders

-Little Wonder's 13 HP blower is the biggest in their line. -The housings are even larger than the 8 HP and 9 HP blowers, for maximum air output. -Ths 13 HP boasts the legendary Honda overhead valve engine-Leader in its Class Patented design produces more air output - moves piles of leaves further and faster-No Blow-Back. You only have to go over the area once! -Ergonomic designed handles, with anti-vibration grip,, are height-adjustable for greater comfort and control. -Computer designed impeller with reversed inclined blades dramatically increases air output. -All modesl have three large 10" pneumatic tires for ease of pushing and maneuverability, even on rough, uneen ground or asphalt-Thw curved, aerodynamic inlet draws air in smoo5hly around the entire inlet area-This design results in constant power even if leaves are drawn into the inlet-Clogging is avoided-The blower housing is continuously welded for strength and durability1. Is this a residential delivery or business? Residential usually cost about 35 more. 2. Does there need to br a lift gate on the truck for delivery. 3. Also, must have the customer number at all times.

Manufacturer: Little Wonder
SKU: 4800030
Category: Outdoor Tools > Lawn & Garden > Leaf Blowers

The 4203 electromagnetic variable speed adjustable base features solid state electronic switching and an 11 in. drill travel. Adjustable position on this base makes lining up the bit easier and faster. Feedback speed control maintains speed and a motor/magnet lockout prevents de-mag during operation. For use on any flat ferrous material, 1/2 in. and thicker.

Manufacturer: Milwaukee
SKU: 3420052
Category: Power Tools > Drills > Drill Presses

Very useful for template and pattern routing. Ball bearing guide rides against the template for an exact duplication. 1/4" shqnk. Two flute. Upper ball bearing. Cut diameter 3/4", flute length 1" Overall length 2-1/2" Uses bearing #47714 and collar #47724

Manufacturer: Amana Tool
SKU: 50245464
Category: Power Tools > Router Accessories > Router Bits > Trim Router Bits