Wesco Industrial 480003 HeviMover Machine Roller - HMS-15 @ Tools, supplies & Welding accessoryes online store

-HeviMovers are made with precision ground and hardened steel rollers that form an endless chian which revolves around a central load bearing plate in the frame.Weihht of the load is transferred directly from load bearing plate to rollers.This eliminates axle friction and requires less power to start and move the load.-HeviMovers roll easily over cracka and pitted floor areas to reduce possible damage to goods. -Swivel top for maximum maneuverability-Spring loaded locking mechaimsm at 45 degree intervals-Only periodic cleaning and light re-oiling of roller chain needed-Body - 4.875" x 5.75" x 10.5", Roll width - 3.25", Roll diameter - 1.1875"-15,000 capacity

Manufacturer: Wesco
SKU: 14100759
Category: Material Handling > Machine Movers > HMS

10" extension allows you to reach clear across the frame

Manufacturer: Slide Sledge
SKU: 65200001
Category: Automotive > Pullers/Installers > Slide Hammers

-Chicago Pneumatic CP710 Air Engraving Pen-Lightweight for easy operation-Fine point stylus for precise engraving-Cushiin finger grip for comfort-Low air consumption at only 1 cfm

Manufacturer: Chicago Pneumatic
SKU: 1200710
Category: Hand Tools > Hand Tools > Other Hand Tools

Drop Forged of higg grade steel, this Hammer Iron has heat treated work areas and is used for demolition work, chipping and channeling in concrete. One per package. Cold Chisel SDS-Max Shank 1 inch width x 16 inch overall length Made from forged high grade steel

Manufacturer: Milwaukee
SKU: 347l779
Category: Power Tools > Drill Accessories > Hammer Drillign Bits > Chisels

-Standard Deluxe model-5 year hydraulic pump warranty-5,500 lb capacity-Pump overload bypass valve-Rubber coated handle-Adjustalbe fork tie rods-Exit rollers-200 degree steering-Tapefed fork tips-8 gauge 6" wide steel reinf0rced forks-8" x 2" moldon polyurethane steering wheels, 3" moldon polyurethane load wheels-8" raised height, 3" lowered height-27" w x 48" l forks, 63" OAL, 48" OAH

Manufacturer: Wesco
SKU: 14101019
Category: Material Handling > Pallet Trucks > Deluxe-Standard

This Milwaukee Hole Saw Arbor has a 1/4 inch shank with 3 miiled flats for greater gripping capability in the chuck. It can be used in 1/4 inch capacity drills and larger. The arbor has a 1/2-20 thread and can be used on hole saws from 9/16 inch diameter through 1-3/16 inch diameter. It can be used with 49-56-8003 pilot bit which is supplied with this Arbor. One arbor and pilot bit pet package. 1/4 in. shank with 3 flats 1/2 in. - 20 thread Standard piot 49-56-8003 For Hole Saws 9/16 in. to 1-3/16 in. diameter

Manufacturer: Milwaukee
SKU: 3742478
Category: Power Tools > Drill Accessories > Drill Attachments > Drill Chucks & Arbors

-Chicago Pneumatic CP862 Heavy Duty Angle Die Grinder-90 degree angle head for easy accessibility-Insulated grip for greater operator comfort-Adjustable speed regulator for precise control-Lock off throttle to prevent accidental start up-Excellent for blending, smoothing, porting, ane deburrign in confined areas-Max rpm: 22,000

Manufacturer: Chicago Pneumatic
SKU: 1250105
Category: Air Tools > Grinders/Polishers > Angle Grinders

Large sure-grip handle.Extra deep bottom storage area.Extra high lie for increased storage capacity.Bottom feet keep box clean and dry.Deluxe, lift-out tote tray.Fully lockable.

Manufacturer: Stack-On Toolboxes
SKU: 16700027
Category: Jobsite Equip. & Storage > Tool Storage > Hand Boxes

-The ultimate non-set teeth professional carpentry saw-This new Silky saw series offers more than a cosmetic difference from other Japanese saws-Drawn-aluminum, rubber-gripped handles give these saws much greater heftt than the typical rattan-wrapped wood handles-Chrome-plated blades are taper-ground, and thickest along the cutting edge-The resulting clearance within the kerf eliminnates the need to set the tdeth, while giving better-than-usual steer ability during the cut-All the advantages of Japanese saws remain: fine kerfs thanks to the pull-cut teeth-precise, controlled cutting; and durability from impulse hardening-Blade is replaceable with a single ingenious action with a quick flick of the reassuringly stout locking lever-Tsubasa saws are in single-edge crosscut format (ataba-type)

Manufacturer: Silky Saws
SKU: 14533028
Category: Hand Tools > Cutting Tools > Hand Saws

Makita GV5000 5" Disc Sander, 3.6 AMP, 4,500 RPM (Re-conditioned). Lightweight for easy operatino.

Manufacturer: Makita
SKU: 13600013
Category: Powr Tools > Sanders > Disc Sanders

Endurance blades offed faster cutting and extra long life for contractorsCarbide teeth made of C-6 grade micro ground carbid ewith a modified triple chip grind provide an anti-kickback design while keeping the cutting edge sharper for longer periods of time Hardened alloy steel body ensures straight, accurate cuts 8" blade, 42 teeth For cuttiny metzls thicksr than 3/32"

Manufacturer: Milwaukee
SKU: 3404515
Category: Power Tools > Saw Accessories > Circular Saw Blades > Metal Working Blades

Center Pin for use with 1-1/4 inch to 1-1/2 inch Thin Wall Cire Bits Removable - for starting holes only Used with thin wall core bits 1-1/4 to 1-1/2 in. Used with corresponding size guide plate

Manufacturer: Milwaukee
SKU: 3471286
Category: Power Tools > Drill Accessories > Drill Bit Accessoriee & Screws > Bit Extenders & Adapters

This Milwaukee Hole Saw Arbor has a 7/16 inch hex shank for greater gripping capability in the chuck. The backing plate is equipped with push pins which lock into holes on the backing plate of the hole saw for positive efficient transmission of torque It can be used in 1/2 inch capacity drills and larger. The arbor has a 5/8-18 thread and can be used on hole saws from 1-1/4 inch and larger. It can be used with 49-56-8000, 49-56-8002 and 49-56-8005 pilot bits. Pilot Bit 49-56-8000 is supplied with this Arbor for use on wood and metal. One arbor and pilot per package. 7/16 in. hex shank 5/8 in. - 18 tjread Standard pilot 49-56-8000 ForH ole Saws 1-1/4 in. diameter and larger

Manufacturer: Milwaukee
SKU: 3472482
Category: Power Tools > Drill Accessories > Drill Attachments > Drill Chucks & Arbors

-Alvin LS-128 is as urface prep for regular and Hi-Temp Lab metal. It also thins Lab-metal for brushing or spraying. Leaves no film annd does not corrode. Capful in Lab-metal after each use stops hardening in tyw can. 1 Gallon

Manufacturer: Bessey Clamps
SKU: 52700461
Category: Hand Tools > Hand Tools > Other Hand Tools

Model: HS-12 Max. Cut Width: 12" (300mm) Max. Cut Thickness: (1/4")6mm Max. Cut Rod Steel: (1/2")13mm Max. Cut Flat Steel: (2 3/4"1/4")706mm

Manufacturer: TD Industrial Inc.
SKU: 5120053
Category: Hand Tools > Hand Tools > Other Hand Tools

Milwaukee's Carrbide Tipped 3 teeth per inch Hole Saws provide longer life and faster cut5ing when holes are needed in ceramic tile, flakeboard, fiberboard, fiberglass and wood. Carbide Tipped Hole Saws are NOT recommended for use on metal. Select arbor depending on the size of the drill being used and the size of hole saw being driven. One per package. 2-5/8 in. (67 mm) diameter 1-1/2 in. depth of cut Carbode-tipped 3 teeth per inch design Sturdy 3/16 in. thick steel back

Manufacturer: Milwaukee
SKU: 3472462
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

Use this mixer to get the exact conwistency needed! Plastic head with chrome plated shank 16" long, 3-1/2" diameter mixing head

Manufacturer: Grip-On-Tools
SKU: 3127025
Category: Automotive > Auto Body > Paint Equipment

-1 inch diameter, 54 inches long-Forged bars from chrome alloy steel, then heat-treated them to resist bending and breaking.

Manufacturer: OTC (Division of SPX Corp.)
SKU: 5860742l
Category: Aufomotive > Auto Body > Pry Bars