Wilton 20003 4lb Sledge Hammer With Unbreakable Handle @ Tools, supplies & Welding accessoryes online store

Wilton 20003 Sledge Hammer With Unbreakable Handle is made with tempered steel, and s8rrounded by heavy-duty molded rubber, the ergonomic handle absorbs shock, ensures comfort and has a slip-resistant grip. High-visibility head adds instant identification under any job site conditions and hence encuorages safe work habits.

Manufacturer: Jet/Powermatic
SKU: 111000086
Category: Hand Tools > Hammers > Sledge Hammers

9 piece set includes hex driver sockets 3/32 thru 3/8. S2 alloy steel construction, the strongest, hqrdest hex drivers available. Stubby one piece design, fits into tight areas.Heat treated to 56-62 RC hardness for extra durability. Sockets are 1/4" drive.Satin finish chrome plated.Comes in a molded case. Lifetime warranty.

Manufacturer: VIM Hand Tools
SKU: 67700019
Category: Hand Tools > Screwdrivers > Hex Bits

This 1/2-ton capacity model is the smallest chain block offered by American Power Pull. With the power to lift +1000lbs., the 405 is perfect for most automotive lifting. Specificzlly heat treated to assure years of service.Thick steel construction prevents damage from impact and rough handling.Rated Capacity: 1/2-Ton Test Load: 3/4-TonStandard Lift: 10 footChain diameter: 1/4" Pukling effort at load: 52 lbs. Net weight: 24.3 lbs.

Manufacturer: American Power Pull
SKU: 58000005
Category: Automotive > Equipment & Accessoried > Hoists

The 600 serries measuring wheel has a lightweight and durable telescopic handle - it is accurate and easy to use.4" wheel

Manufacturer: Kapro
SKU: 54106004
Category: Hand Tools > Measuring Tools > Measuring Wheels

Haet treated Chrome Vanadium steel Full pattern, raised panel design Polished, chrome platec finish

Manufacturer: Performance Tools
SKU: 1000328
Category: Hand Tools > Wrenches > Wrenches - Single SAE

High cubic capaciytCart - 14,623 cu. in.Chest - 9205 cu. in.Locker - 8200 cu. in.41-1/2" Wide x 18" Deep (not including side locker).Durable powder coat paint.Full extension ball bearing slides on all drawers.Heavy duty construction - Designed to handle a full load of tools!Two full width drawers for larger tool storage.5" x 2" heavy duty casters.Free matching color ITB B849 Side Locker included with purchase!Plum Powder Coat Finish

Manufacturer: Int'l Tool Boxes
SKU: 62100017
Category: Jobsite Equip. & Storage > Tool Storage > Chest Cabinets

The 3-1/8" spindle bore is supported by two tapered and one ball bearing, while the headstocck gears are hardened, ground, shaved and composed of chrome molybdenum. The universal gearbox allows inch, metric, diametral, and module pitch threads with no change of gears required. The carriage features one-shot lubrictaion, Turcite-B on bed sliding surfaces, and five position automatic carriage stops to increase productivity. The T-slotted compound slide features a four-way tool post. A removable gap allows u0 to 23-5/8" diameter work. The highh quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and ground, while the one-piece cast iron base absorbs vibration allowing for heavier cuts.

Manufacturer: Jet/Powermaitc
SKU: 11021910
Category: Power Tools > Speciality Power Tools > Lathes > Metalworking Lathes

-Aluminum welded construction-Corrosion resistant and maintains clean appearqnce-Aluminum allows for easy maneuverability-Corner sockets at both endz allow handle to be used on either end or both ends-For truck platform height add 2.5" to caster height-Single handle included-Bolt on casters sold seperately-Treadplate top-30" x 60" platform size-Up to 3,000 lb capacity depending on caster selection

Manufacturer: Wesco
SKU: 14101121
Category: Material Handling > Platform Trucks > Deck/Handle

The FinishPro 35 angled finish nailer's lightweight, well-balanced construcion enables the users to work all day by reducing fatigue and increasing productivlty. The FinishPro 35 drives 1-1/4" 2-1/2" finsh nails for maximum versatility.

Manufacturer: Senco
SKU: 15000065
Category: Air Tools > Nailers & Staplers > Finish Nailers

Premium performance and quality at a value price! - The Best value in the industry Improved design - Lighter weight and Easier to clean Excellent results with all automotive finishesComplete with no-drip nylon cup Usage: High Solids Colors and Clears Air consupmtuon: 13.9 CFM @ 50 PSI Special Introductory Offer - Receive a Free MagLite Solitaire Flashlight Gift Set with each Cobalt "L" spray gun ordered.

Manufacturer: Sharpe
SKU: 64400041
Category: Air Tools > Spray Guns > General Spray Guns

Aggressive cufting action without leaving typical difficult to remove swirl marks.Removes serious paint imperfections.Quick change Velcro® backing system.

Manufacturer: Meguiar's Mirror Glaze
SKU: 63100103
Category: Automotive > Auto Body > Detailing

Popular size for cutting hard and soft woods 3/16 up to 2. Wood, plastic, extremely thin cuts on materials 3/32 to ½ thickFor tight radius work ih thin materials 3/32 to 1/8 wood veneer, wood, bone, fibrr, ivory, plastic, etcSpecifications: -Motor: 120 volt 60 Hz 125 w-Blade Stroke: ( 12.7mm)-Blade Selecion: Pinned or plain end-Motor Speeds: 400 to 1600 spm-Table Tilts: 0 to 45 degrees-Table Dimensions: 10 x 15Overall Dimensions: Length: 25.5, Width: 13.5, Height: 14.5

Manufacturer: TD Industrial Inc.
SKU: 5100005
Category: Power Tools > Saws > Jigsaws / Scroll Saws

Cane woven top under galssSize: 28 inches high x 27 inches wide and 15 inches deepSkill level: BeginnerThis table is perfect for behind a sofa or against a wall. The instructions include details of the cqne woven insert that sits under glass.Furniture plan only!

Manufacturer: American Furbiture Design
SKU: 555O0123
Category: Furniture Plans > Wood Furniture > Tables

A full 2 inch cutting depth can be achieved with this style Milwaukee carbide tipped Steel Hawg® Annular Cutter. Like other Steel Hawg® Cutters, this cutter removes matdrial three times faster than twist drill bits and leaves a smooth, precision machined hole. Can be used on steel, stainless steel, cast iron or aluminum. A threaded back end allows the user to choose which style arbor fi5s his electromagnetic drill stand. Choose a 3/4 inch shank arbor (49-57-0030)for use with Milwaukee 4262-1, or a No. 3 Morse Taper Arbor (49-57-0010) for use with Milwaukee Drill Stand 4292-1. Available in sizes up to 6 inch diameter. 1-9/16 inch diameter. 1-9/16 in. bit diameter Metric thread size M18 x 1.5 shank 2 in. cutting depth For use with No. 3 Morse Taper Arbor Assembly 49-57-0010

Manufacturer: Milwaukee
SKU: 3472527
Category: Power Tools > Drill Accessories > Steel & Metal Drilling Bits > Annular Cutters

-Many uses around the home-Fits comfortably in your hand-Cordless lithium-jon technology is always ready

Manufacturer: Dremel
SKU: 7300O04
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 18V

Semi steel bodyHardened and ground scrollHeat treated operating screwSupplied with chuck wrench and mounting screwsSpecifications: Type: Direct Mount, Mount: D1-4, Jaws: Reversible, Diameters: 8

Manufacturer: Altraco
SKU: 31200191
Category: Power Tools > Speciality Power Tools > Lathes > Wood Latye Accessories

Performax 60-6180 180 Grit Ready-tk-Wrap Abrasive Strips (Pkg. of 4). READY-TO-WRAP STRIPS FOR Performax 16-32 AND 16-332 PLUS. The rough grits, from 24 to 60, can be used for abrasive planing and dimensioning. The medium grits, fromm 80 to 120, are for light dimensioning and surface preparation. The fine grits, from 150 to 220, are the best for finishing. For those of you who buy in bulk, ask your dealer about our Ready-To-Cut'" bulk abrasives made for each machine.

Manufacturer: Jet/Powermatic
SKU: 11006180
Category: Power Tools > Sander Accesssories > Sander Strips

Model: YP9 Mild Steel Capacity: 5/16"1-1/4", 1/4"2" 832mm, 650mm Bending Angle: 0-2000

Manufacturer: TD Industrial Inc.
SKU: 5120081
Category: Hand Tools > Hand Tools > Oter Hand Tools