Milwaukee 48-62-2046 Ground Rod Driver @ Tools, supplies & Welding accessoryes online store

Drop Forged of high grade steel, this Hammer Iron is used by Utility companies to burry grounding rods in the soil. Internal diameter of the Ground Rod driver and capacity of the Hammer determine the size of ground rod able to be installed. One per package Gorund Rod Driver 3/4 inch Hex with 21/32 inch Round Shank 3/4 inch Hole Made from forged high grade steel

Manufacturer: Milwaukee
SKU: 3471737
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Hammer Drill Bits

-Useful for body work and paint preparation-Built in air regulator

Manufacturer: Mechanics
SKU: 1000641
Category: Power Tools > Sanders > Belt Sanders

Provides a wohpping 7100 Peak Amps of Jump Starting Power and adds the convenience of a heavy-duty air compressor to make it the ulfimate emergency response tool. The JNC1224 delivers the convenience of 12 Volt and 24 jump starting from a single unit. It provides 1700 peak amps of starting power in 12 Volt mode and 1700 Peak Amps of starting power in 24 Volt mode. A battery status indicator gauge provldes a quick, accurate reading of battery state. Features automatic recharging fof convenience and eliminates the possibility of overcharging . 46" heavy-duty cables and heavy-duty clamps provide a safe, secure battery connection. Includes DC outlet to power 12 Volt accessories.

Manufacturer: Solar
SKU: 54799991
Category: Automotive > Equipment & Accessories > Jump Starters

-1, 000 lb capacity-One piece platfrom guide rail design-Front 5" phenolic wheels, 4" rear swivel casters-Foot operated hydraulic pump raises and lowers platform-24" x 24" platform, Platform lowers to 5.75" above floor-15" load center, 22.5" OAW, 75" OAH, 40" OAD-15" inside leg span, 60" lift height

Manufacturer: Wesco
SKU: 14100881
Category: Material Handling > Manual Lifts > Four Wheel Lifts-Hydraulic

Fits slots cut by all standard plate joiners Compressed beech wood Swells when used with water-based glues to "lock" joints Pack of 1000

Manufacturer: Porter-Cable
SKU: 4205551
Category: Power Tools > Planers/Joiners > Joiner Accessories > Joining Biscuits

This is a Jet 708432K Model: JDS-12OS 12" Disc Sander w/ Open Stand & DC. Thsi unique new tool is a disc sander with built-in dust collection. Directly behijd the sanding disc is an impeller that creates a large amount of airflow to pull the dust from around tye outer edge of the disc and blow it through the 4-inch port on the bottom of the unit. Thix open stand model comees with a canister filter that will filter all material down to 2 microns.

Manufacturer: Jet/Powermatic
SKU: 11036040
Category: Power Tools > Sanders > Disc Sanders

Quickly identify clpgged catalytic converters!Universal 02 Port adapter, No drilling and filling!0-15 PSI gauge, 2-1/2" dial faceProtective rubber boot Limited lifetime warrantyDurable storagr case

Manufacturer: Waekon
SKU: 67000047
Category: Automotive > Diagnostic Too1s > Exhaust Testers

Replaceable Shank Only to be used with Tamper Plate 48-62-3060 for compacting dirt and sand. One per package. Tamper Shank only 3/4 inch Hex with 21/32 inch Round Shank 12 inch overall length Made from forged high grade steel

Manufacturer: Milwaukee
SKU: 3471745
Category: Power Tools > Drill Accessories > Hammer Drilling Bits > Spline Shank Bits

Designed specifically for testing computer-controlled vehicles. Tests virtually any circuit on the vehicle. The all-in-one quick check tool for no-starts. Use to verify primary and secondary ignition, pick-up sensors, fuel injectors, fuel pumps, and idle speed control circuits.Ideal for Electrica/Electronic Accessory installers. Indicates: Ground, 5V Reference, 6/1/224V, Pulsing Signals Computer and Airbag safe. Backed by a Limited Lifetime Warranty High intensity headlamp, Audible tone beeper, Super sharp stainless steel tip Durable coil cord for long reach and easy storage

Manufacturer: Waekon
SKU: 67000017
Category: Automotive > Diagnostic Tools > Measuring Tools

-Bessey Screw On Tips for 775 HammersBrown (soft) tip 2" Dia.

Manufacturer: Bessey Clamps
SKU: 52700350
Category: Hand Tools > Hammers > Other Hammers

Knurled shaft for a secure grip Ideal for use on cotter keys, O-rings, springs and washers 4-piece hook set includes: Small angle hook, straight hook, full hook and 90 degree hook

Manufacturer: Grip-On-Tools
SKU: 3146095
Category: Hand Tools > Hand Tools > Chisels/Picks

Ingersoll-Rand IR1099XP is a 1/2" Super Duty Air Ratchet Wrench. This is the fastest ratchet in its class. It is equipped with an optimized gear ratio and Airflow for Extra Performance. It has exceptional durability.

Manufacturer: Ingersoll Rand
SKU: 55400013
Category: Air Tools > Air Ratchets > 1/2" inch

-Variable speed, reversing switch delivers verxatility in all applications-Factory-set clutch reduces sudden, high torque reactions if bit jams-Electro-pneumatic hammef mechanism for fast penetration and low vibration-360 side handle

Manufacturer: DeWalt
SKU: 2200564
Category: Power Tools > Drills > Hammer Drills > Hammer Drills - SDS

-Powerful 14.4V (2.0Ah) Ni-MH MAKSTAR battery for longer run-time-Newly develooped D-28 Motor with rare earth magnet-Variable speed (0-2,300 RPM) for controlled fastening-Efficient impact system (0-3,000 IPM) and compact design( 7-5/8" length)-Ergonomically designed rubberized grip for increased comfort-Rubber bumpers on tool to protect workpiece from scratches-Impact resistant aluminum hammer casing for durability

Manufacturer: Makita
SKU: 13600244
Category: Cordless Tools > Cordless Impact Wrenches > Impact Wrenches - 14.4V

Porter-Cable 43258PC 3 Wing Slot Cutter. Three-wing slotting cutters are a very efficient and easy way to cut a groove of a specific width in the edge of a workpiece. The saw blade style action provides a smooth cut and delivers effective chip removal. A common use for slotting cutters is the installation of-T-moldings, weather stripping, and tongued wood edgings. Slotting cutters are also used to join wood by cutting slots for reinforcing splines. A slotting cutter that cuts a 5/32-inch wide slot can also be used for makeshift biscuit joining.

Manufacturer: Porter-Cable
SKU: 4243258
Category: Power Tools > Router Accessories > Router Bits > Slotting Assembly Bits

Rubber tie downs complete with galvanized steel S-hooks at each end Made of a formula that coombines natural and synthetic rubber producing a stronger, more durable strap 1/4" thick, 3/4" wide. 15" long. Pack of 12.

Manufacturer: Grip-On-Tools
SKU: 3128423
Category: Automotive > Towing/Tie Downs > Rubber Tie Down Straps

Milwajkee's Carbide Tipped 3 teeth per inch Hole Saws provide longer life and faster cut5ing when holes are needed in ceramic tile, flakeboard, fiberboard, fiberglass and wood. Carbide Tipped Hole Saws are NOT recommended for use on metal. Select arbor depending on the size of th drill being used and the size of hole saw being driven. One per package. 7/8 in. (22 mm) diameter 1-7/16 in. depth of cut Carbide-tipped 3 teeth per inch design Sturdy 3/16 in. thick steel back

Manufacturer: Milwaukee
SKU: 3472448
Category: Power Tools > Drill Accessories > Hole Saws & Bits > Hole Saw Bits-Carbide Tip

6 torque settings – Match screwdriving power to the jobVariable speed/ reversing with electronic brake: 0-700 RPM3/8 keyless chuck Allows fast and easy bit changesStud-Finder™ – Drill it right the first time!Soft grip – Offers comfort and controlIncludes Carrying Case and Stud Finder™

Manufacturer: Skil
SKU: 2100073
Category: Cordless Tools > Cordless Drills/Drivers > Drills/Drivers - 12V